PROVN OF COOK HOUSE AT E COY AREA OF BRC VISITOR SHED WITH HARD STANDING NEAR BLDG NO P34 FOOTPATH FROM MAIN ENTRANCE GATE TO RO HQ COMPLEX AND ADDITION ALTERATION TO P22 B AND CONNECTED BUILDING WITH CONNECTED AREA UNDER GE DANAPUR CANTT

Amount

Boring holes 5m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, trench for cable etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation over area n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance exc. 50 m but not exc. 25 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of gauge n. exc. 63 mm deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M& L ATT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface of flooring complete all as specified and directed

M& L ATT Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed

M & L for plain cement concrete, 1:4:8 type D-2 Nominal Mix (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed..

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for 40 mm thick Damp proof cource in cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) to horizontal or vertical surface incl necessary form work concrete complete all as specified and directed. .

M&L for providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal under reamed piles, mass concrete etc complete all as specified and directed

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&L for providing reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, floor and roofs n exc 20 cm wide and sides of RCC slab, RCC / PCC bends in walls horizontal or sloping and similar work complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L Rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendring 10mm thick in cement mortar 1:4 on concrete surfacves/chajja/ceiling, etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

M & L for Non skid edge less ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.

M & L for 450x300 x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

M&L 18-20mm thick prepolished granite stone slab machine cut on vertical surface as in dado/skirting bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and incl 10 mm thick screed bed CM 1:4 all as specified complete.

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in Sub base flooring for receiving kota stone complete all as spd and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl Screed bed or bedding layer of Cement Mortar (1:6), 15 mm thick for laying floor finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M &L for machine cut kota stone slab 20-25 mm thick as in skirting, riser, steps over cement mortar laid and jointed with grey cement cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick plaster in CM 1:4 all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specified and directed.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs (hold fast), 04 Nos Butt hinges each side(as required), lock strike plate, etc complete, size of frame 125mm x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M & L PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in bed locks for hold fasts including necessary form works complete all as spd and directed

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

S & F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spesified and directed

S&F Aluminium anodised handles cast type and fixed 125 mm long complete all as specified and directed.

S & F, Aluminium Butt hinges (ISI marked), medium weight of size 100 mm complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 250 mm large complete all as specified and directed.

S&F floor door stopper 150 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay, tower bolts (each shutter having two tower bolts 100mm long) complete with glazing bars devetailed or welded complete all as specified and directed.

-Ditto- all as per item No 49.00 above but without glazing bars

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

S & F in repair powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc

S&F mild steel conduit curtain rod with PVC coating fancy type drapery rod 20mm dia of any colour as approved and fixed with bracket including fancy type end bulb complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceiling and applying 02 coats of oil bound distemper over a coat of primer over and including 3 mm thick Birla/JK wall putty including preparation of surface complete all as specified and as directed

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate /plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade and three part of sand ( all by weight) complete.

S & F 15mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S & F 20mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S & F 25mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S&F 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F shower rose chromium plated with swivel joints of size 125mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specifiedand directed.

S & F Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified and directed.

S&F bib tap 15mm brass chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc fancy type complete all as specified and directed.

S&F 20 mm dia stop valves, cast copper alloy, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions all as specified

S & F of 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing PVC pipe 32 mm dia ) complete all as specified and directed

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection 15mm dia 450mm long with CP brass nuts on both sides complete all as specified and directed

M&L 18-20mm thick granite tiles machine cut , table rubbed and polished bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing and incl 15mm thick screed bed CM 1:4 complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacitycomplete all as specified and directed.

S&F ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms) complete all as specified and directed

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia. complete all as specified and directed.

-Ditto- all as per item No 76.00 above but 75mm bore complete all as specified and directed.

S & F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.

S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified and directed.

M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement over roof slab etc complete all as specified. (Note : WPC will be measured & paid for separately).

M&L PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L Cement concrete in surface channel and drain etc in 1:2:4, type B1 (using 20 mm graded stone aggregate) complete all as specified and directed.

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

Excavation over area exc 1.5m but n exc 3.00m deep and getting out in soft/loose soil complete all as specified and directed

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L rendering 12mm thick on fair faces of brick /concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified & directed .

M&L for laying 150mm dia Reinforced concrete pipes, class NP3, laid and jointed in CM (1:1) with collars & testing complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregated) bed to drain pipes including packing under and haunching against the sides of the pipes after laying and testing for 150 MM dia of pipes complete all as specified and directed..

Excavation of post hole (or similar holes)each not exc0.50 cum in soft /loose soil ,getting out ,returing filling in and raming earth or broken ruble mixed with earth around in layers not exceeding 25 cm ,watering,and removing surpl soil to adistence n. exc50 m and making good suraface complete all as specified and directed.

M& L for 150mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient in two layers and camber complete all as specified and as directed

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises complete all as specified & directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.

S&F in repair brass chromium plated health faucet for EWC with 8 mm dia flexible tube 1.2 m long including nut/washer complete all as specified and directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange complete all as specified and directed.

S&F in repair stainless steel soap dish, of standard size and shape complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified & directed.

S & F Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet with curved type 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws as specified.(with curved type roof sheeting) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

Dismantling wall and ceiling boards any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed .

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S & F 6 mm thick Non asbestos fibre cement building board fixed or laid/inserted to GI frame work as in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L 100 mm thick cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L PCC 1:2:4 type-B2 (40mm graded aggregate) as in sub base mass concrete etc complete all as specified and directed..

M&L for two coats of weather coat paint on newly plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge.

M&L for rubber moulded glossy Machine Pressed precast PCC interlocking paver block 60mm thick size and confirming to IS 15658-2006 of 60 mm thickness M-35 Grade ® mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and as directed by Engr-in-Charge. The pattern of paver block shall be approved by GE and shall be of approved make. Note: Payment of sand cushion shall be measured and paid separately.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

S&F hollow rolled mild steel structural steel work in tubular/ Square/rectangular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engr-in-Charge.

M&L for precast 1:2:4 type B1 (using 20mm graded stone aggregate) as in Man hole cover etc setting in CM 1:6 complete all as specified & directed.

Surface excavation n. excc 30cm deep & avergeing 15cm deep and getting out in soft/loose soil complete all as specified & directed.

M&L rubber moulded glossy prepainted Chequered cement concrete tiles 20cm x 20cm x 22mm thick,set, jointed and pointed in neat cement slurry including Screed bed or bedding layer of Cement Mortar (1:4), 20 mm thick for laying floor finishes complete all as specified and as directed by Engr-in-Charge. The pattern of block shall be approved by GE and shall be of approved make.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in coping including necessary form work complete all as specified & directed.

Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 4 core complete all as specifed and as directed.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation etc. complete all as specified and directed. Note :- Thickness of sand shall be measured 18 cm thick after punning.

M & L brick cover of old size bricks sub class 'B' with width equal to the length of the brick laid dry & abutted with each other with gap between adjacent brick n.exc 1 mm over UG cable for protection complete all as specified and directed

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes for mounting switches, sockets, fan regulators etc for One light/fan point controlled by one switch complete all as specified and directed:-

All as per item No 123.00 above but for one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item No 123.00 above but for one 5 Amps socket out let point controlled by one switch on independent board

All as per item No 123.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board.

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 240 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 240 Volts complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 240 volts complete all as specified & directed.

S&F ceiling rose surface bakelite 63.5mm dia three terminals fixed, complete all as specified & directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

Supply and fixing double door TPN DB's four way of powder coated DB's suitable for MCB's fitted with bus bar , neutral link , earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as spd and directed.

Supply and fixing MCB TPN 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SPN 5 to 40 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

S&F LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size including 1 No tube 18/20 Wall as specified. Make- Havells Cat No: REGALBATTENT8UPTO1X22WDSBSWH+ CRYSTAL1213T8DSTL18WLED865SGLASS or equivalent model of other make specified.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete.

M & L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Juction boxes, elbows saddles. Pipe hooks, couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs complete all as specified & directed.

Supply and fixing of KF Themoplastic junction boxes suitable for 10 Sqmm 2 core armoured cable of Dimension not less than 155x210x10x92 mm of polycarbornate (PC-GFS), IP-66 protection, dust proof, water, tight, light weight, acid resistant, corrosion proof, insulated and shock proof, fire retardent, non toxic material with internally embedded gasket, against IK-09 with 5 ways insulated connectors, knockouts for cable entry alongwith cable glands as per required of arrangement for pole mounting complete all as specified and as directed by EIC. Make: Hensel, Cat No KF1610G or eqivalent model of Sintex/Rittel.

M & L Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete.

Supply & fixing batten / angular fitting complete all as specified and directed.

Supply and fixing double door SPN DB's eight way of powder coated DB's suitable for MCB's fitted with bus bar , neutral link , earth bar and Din ral as per existing finishing completeall as spd and directed.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed.

Supply and fixing metallic body air fan / ventilator with louver 450 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .

Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40/25 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent model of other make specified.

M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and as directed.

M/S PRAVIN ENTERPRISES

M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE

M/S ANAND MOHAN ENTERPRISES