SBM 2.0

Amount

Dismantling and Clearing away from this site for exisiting damaged condition of work for including cost for all labour charges etc., Complete as per standard Specification. 1.Indian type water closet

2 .Flooring Tiles(SOR; SL.NO W-0042 ,PAGE NO;22)

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Special Ceiling Plastering in cement motor 1:3 mix (one cement, three sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete.

Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Paving the floor with Vertified tiles of approved make and quality and clour of size 300x300x10mm in cement mortor 1:3, 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification

Daddoing with glazed titles of size 300x200x6mm of approved make and quality and clour cement mortor 1:2 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch influshwith wall covered withhylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) SD 22

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mmTW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion withsuitable colour for open PVC plug point SD 36

Wiring with 2 x 4 sq.mm. (56 / 0.3mm) PVC insulated SC unsheathed copper cable conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MSswitch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wireconnection by 14 SWG TC wire for open power plug point SD384

Painting the walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)

Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 2.50 Sq mm Flate vertified cable

20 mm dia wiring pipe

32 mm HDPE Hose coller

32 mm GI Elbow

32 mm dia GI Pipe " B " Class

32mm dia GI Union

32 MM GM Gate valve

32 mm dia MTA

32 mm dia bore well M.S Clamp

180 mm dia bore well M.S Clamp

1000 Lts capacity HDPE tank

32 mm dia Tank Nipple

32 mm dia UPVC TEE

32 mm dia UPVC Pipe

32 mm dia UPVC Ball valve

32 mm dia UPVC Elbow

32 mm dia Hex Nipple

32 x 20 mm dia UPVC Thereded Elbow

20 mm dia water not Tap

W/C 110 mm dia PVC 4 Kg/m² pipe

110 mm dia PVC Elbow

110 mm dia PVC TEE

Wash basin (550x400 mm) with pedasatal

Mirror

Man Hole precost slab 750 x 750 mm

supply and fixing of Eectrical material 1)Woodern Board

32 Amp fuse carier

9 W CFL BULB

1x13 CFL Street light higher end

Incinerators for Ladies bathroom (for school works)

Charges for conducting Geophysical survey to lcate favorable point for drilling borewell point including cost of transformation of machinery and labour charges etc. complete complying with standard specification. (Approved local rate)

Drilling of 12" dia vertical borewell so as to have afinished size of 6" dia borewell in boulder area to anyrequired depth as decided by the TWAD Board Officersincluding Transportation from one place to anothr placewith in Tamilnadu State by direct or reverse rotary mudcirculation method using Contractor's rig tools, fuel,labourers, bentonite mud and water required for drillingat the site shown by the TWAD Officers includingconstruction of mud pit etc. using only calyx rigs. Page 318

Drilling 150 mm” dia deep vertical bore well in hard rock area in any Required depth as decided by the departmental officer including inserting the casing pipe etc complete as per standard specifications

Supply and delivery of 150mm PVC casing pipe (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification.

.Supply of single phase Sub mersible motor with Pump set as per ISI 8034 with Panel board of 20 lpm X 125 M of approved quality including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.

Towards labour charges for fixing of PVC ,GI pipe and (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification. 1) 110 mm dia PVC pipe:

32 mm dia UPVC pipe:

Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications.

SMT CONSTRUCTION (BID ID -1082184)