Supply Installation Testing Commissioning of 15HP 11KW pump set for improvement of water supply to Mangor and surrounding area in Vasco Constituency

Supply , Installation, Testing, Commissioning of 15HP/11KW pump in Kirloskar/ Cromption or equivalent Monoblock Pumpset, suitable to operate on 3 phase 415V at the site of work including loading unloading , freight, loading & etc. complete. and with specifications as under: i) Three Phase Two stage Monoblock Pump Set OF 15HP ii)Total Head in meters 36 mtrs iii) Discharge in M3/HR : 100 Cum/hr. iv) Speed in rpm : 2880 RPM v)Stuffing Box Details :Gland vi) Impeller : Closed ( CI ) vii) Pump Size in mm : 100 X 100 viii) Pump Casing : CI The Pump Shall be complete with all accessaries, foundation bolts etc. complete and as approved by Engineer-in-Charge.

Supply , Installation, Testing, Commissioning of following accessories for an existing pump panel at Mangor i) Power Contractor 25 Amps 3 Pole - 3Nos ii)Over load Relay 9 - 15 Amps range -1Nos iii)Ammeter range 0-100 Amps CT Operated - 1Nos iv) CT for ammeter ratio 100/5Amps - 3Nos v) Modem For online Data Monitoring - 1Nos

Supplying, Installation, Testing & Commissioning of two wire Hydrostatic level transmitter, make vega, wika or equivalent, range 6mtrs , Supply : 10 to 24V DC, Protection : IP 68, Insulation :100M ohm at 50V DC, Pressure Range : 0.5mH2O to 2000.5mH2O, Vibration : 20Grms( 20 to 2000Hz), Accuracy: ( Full Scale): +/- 0.5. and installation of universal display for monitoring tanks level for an existing panel.

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile iron Sewage double flanged manually operated Sluice Valve generally conforming to IS: 14846 - 2000 having body, door, dome, gland in graded cast iron to IS:210 Gr. FG 260, four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2, inside screw of non-rising stainless steel AISI 410 IS 6603 GR 12 CR 12 spindle, Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and gear box. and back seat bush.) TYPE P.N. 1.6 (Class A ) Dia in mm 100

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I, having body, door, cover in graded cast iron to IS:210 Gr. FG 200, body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ), hinge pin of stainless steel AISI 410, Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.6 (Class A) Dia in mm 100

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. single large orifice air valve(fig S2confirming to IS 14848/2000 with suitable connections as directed by Engineer -In- Charge for working pressure of 10kg/sq.cm. (Class B) Dia in mm 25

Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete.Double Flange Reducer Nominal Diameter in mm 200x100

Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminous paint complete.M.J.Collar Nominal Diameter in mm 200

Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete With 10 mm -12 mm thick plate Tees, bends, reducers

Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete M.S.socketed tail piece suitable for connecting M.S pipeline with C.I./D.I pipeline

Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling, tack welding, assembling in suitable length to form special, welding on automatic machine and forming V edge on both ends of special as required, hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete With 25 mm thick Plate Flanges

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I Nominal diameter in mm.100

Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts, as directed by the Engineer in-charge.Nominal diameter in mm.100

Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts, as directed by the Engineer in-charge.Nominal diameter in mm.200

Dismantling old C.I./D.I. Pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site, lead up to 50 metres at site.Diameter in mm 100

Dismantling old C.I./D.I. Pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site, lead up to 50 metres at site.Diameter in mm 200

Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete .Coupler Outer Dia in mm 20

Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete .End cap Outer Dia in mm 20

Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . Male Threaded Adapter Outer Dia in mm 20

Supplying at store or site of work of ASTM UPVC white fittings conforming to ASTM 2467 with ISO 14001 etc. Complete . Female Threaded Adapter Outer Dia in mm 20

Supplying of ASTM UPVC pipe conforming to ASTM 1785 with ISO 14001 etc. complete. SCH-40 (blue)/(white) Dia in mm 20

Additional / Optional Accessories : Coil Cable 3 x 0.75 mm 2 PVC cable with common, braided copper shield (7 mmdia) – Conductor resistance :</=37 Ohm/km. – Capacitance : core / core, shield grounded : </= 120 pF/m Permanent operating temperature : 20… +80 Deg.C

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :All works upto plinth level

Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :25 mm nominal bore .

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore