REPAIRS TO JOINERY, CUPBOARDS IN JCOS ORS MD ACCN (MAP QTRS) UNDER AGE B/R (S) NO I GE (SOUTH) SECUNDERABAD

Amount

Taking down shutters n.exc 1 sqm each complete all as specified and as directed

Taking down shutters exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed

Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and as directed

Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and as directed

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded crushed stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

S & F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded Complete all as specified and as directed.

M & L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed aggregate) as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork complete all as specified and as directed

S&F II nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and as directed

S&F 40mm thick second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F of factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F powder coated Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition Sliding and openable type frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

S&F for Framed work such as grills, windows grill, gratings, Gate etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; amework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L in repairs for 18mm thick plywood of grade (BWR), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and as directed

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish colour and pattern as approved and fixed over plywood with with side lipping approved adhesive complete all as specified and as directed

S&F in Continuous (piano) mild steel width of flap 30mm bright finish or electro galvanised

S&F in repair 20mm dia Harrison rails (Curtain Rod) mild steel, chromium plated with fixing brackets and fancy type knob, stops, rollers etc complete all as specified and as directed .

M & L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Supply and fix in repairs figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed

S & F for 4.0 mm thick sheet glass, ordinary quality and glazing in aluminium door frames with beading not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F of 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 200 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and as directed.

S&F of Aluminium handles, cast type, anodised of size 200 mm long etc complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.

S&F of Aluminium anodised,barrel tower bolts of extruded section of size 150mm long etc complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

Taking down cement plaster from walls built in cement mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. to receive plaster complete all as specified and as directed

M&L for rendering 15 mm thick on fair face surfaces of brick work or concrete in CM (1:4) finished even and smooth without using extra cement.complete all as specified and as directed .

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 5 mm thick in ceilings in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed .

M&L for preparation on newly plastered wall surface and applying two coats of cement base paint complete all as specified and as directed.

M & L for preparation of new plastered or unplastered surfaces on walls including cornices and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed .

M & L for preparing new plastered or unplastered surfaces on ceilings including cornices and applying three coat of white wash complete all as specified and as directed .

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying Two coat of synthetic enamel paint over one coat of red oxide primer all as directed complete all as specified and as directed

M & L for preparation old srfaces plastered or unplastered surfaces of walls including cornices and applying one coat of acrylic emulsion distemper including filling cracks/ undulated surfaces with wall care putty wherever required complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces on walls/ceiling including cornices and applying one coat of cement based paint complete all as specified and as directed

NARAYANA CONSTRUCTIONS (BID ID -3504719)

SUN AND SAND BUILD TECH (BID ID -3498282)