REPAIR /MAINT OF PATH CHAIN LINK FENCING, BOUNDARY WALL AREA DRAINAGE AND CULVERT IN AGE B/R-IV JURISDICTION UNDER OUT STATION KLPS UNDER GE (AWC) MHOW.

Amount

M&L brick work with fly ash brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 but except bricks, including dismantled of brick work built in cement mortar complete all as specified and directed. Note:- Bricks from dismantling shall be reused.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement and including taking down cement plaster any description on brick or stone wall complete, all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing, and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

Restraining & resecuring existing galvanised/ms barbed wire straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

S & F mild steel TMT round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Ditto as item no.8, but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only chain link MS galavanised fencing any size or type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F in repair PVC (SWR) pipe 50 mm dia in any length provided as in brick wall as weep hole, complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

M & L Precast RCC 1:2:4 type B-1 using 20 mm graded aggregate as in surface channel, manhole covers and drains etc. with required necessary form work and including demolition of PCC, complete all as specified and directed. Note-(i) All Shuttering work required to execute this item is included in the cost. (ii) Reinforcement shall be measured separately.

S & F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall clading, or as view cutter over the boundary wall, etc. including dismantling of corrugated steel sheeting, complete all as specifed and directed.

Excavation in trench in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5M in depth not exceeding 10 sqm on plan and getting out in any type of soil complete.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete all as specified and directed.

S & F Reinforced concrete pipes 450 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer complete all as specified.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint on old decorated surfaces of wall complete all as specified and directed.

S & F Joist, channel, angle or tee , fixed indipendently including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed. (Fe-410-W(Gde-E-250) quality A).

Dismantling of disturbed existing galvanised steel sheeting from the angle iron picket, MS square tube frame, or any other type of fixing and stacking the same a side or store safely and refixing the same to angle iron pickets or MS steel frame at old/new place after completetion of stone/ Brick wall work in any height , any position, any description, fixed galvanised sheet with coach screws and washers, as in wall clading, roof, or as view cutter over the boudary wall, etc. complete all as specifed and directed.

Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of tiles of any description or thickness etc. colour and shape as approved, complete all as specified and directed. Note : Sand cushioning shall be measured and paid separately.

M & L precast cement concrete kerb stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc including demolition. , complete all as specified and directed.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

Use and waste of form work for flat Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, drain wall and soffits (if any) of drain slab and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, drain wall, basement slabs etc. and mass concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc.complete using ERW 1979 or induction butt welded tubes conforming to I.S. 1161-1179 grate St-240 complete all as specified and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L Providing precast cement louvers and jallies 50 mm thick of any size as approved by GE including all mouldings, frame etc all as specified and directed.

M & L for RCC (1:2:4) type B0 Nominal Mix (12.5 mm graded aggregate) as in colums, posts and struts complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc complete all as specified and directed.

Goyal Construction

sunway associates