02/SE/2020-21

Amount

Supply & fixing sign board ISA 40 x 40 x 6mm size 1.20 x 1.20 x 3.0m and 25 x 3 mm M.S. flat bracing and painting causion letter after primer coat on 18 SWG MS sheet; including all cost of material, labour, T&P etc. complete work.

Earth work in digging foundation for structures in all type of soil including lead upto 30.00m, lift upto 1.5m. and its proper disposal as per direction given by engineer in charge required for proper completion of work including cost of all T.& P., labour etc.

Laying PCC A40-M15with cement (OPC 43 grade)corse sand of F.M. not less than 2.5 and crushed stone grit 4.75mm to 40mm including lead upto 60.00m, lift upto 3.0m. mechanical mixing & mechanical vibration but excluding cost of centering and shuttering required for proper completion of work including cost of all T.& P., labour etc.

Laying RCC A20‐M‐25 with cement (OPC 43 grade)corse sand of F.M. not less than 2.5 and crushed stone grit 4.75mm to 20mm including lead upto 60.00m, lift upto 3.0m. mechanical mixing & mechanical vibration but excluding cost of centering and shuttering required for proper completion of work including cost of all T.& P., labour etc.

Laying CC A20‐M15 in structures with cement (OPC 43 grade) corse sand of F.M. not less than 2.0 and hard stone ballast (4.75‐20 mm size) including lead upto 60.00m, lift upto 3.0m. mechanical mixing & mechanical vibration including cost of centering and shuttering required for proper completion of work including cost of all T.& P., labour etc.

Supply & laying natural shingle 20 to 40mm gauge in reversed filter below CC blocks for reliefs water pressure including cost of for proper completion of work including cost of all T.& P., labour etc.

Supply & laying pea gravel in reversed filter below CC blocks for reliefs water pressure including cost of required for proper completion of work including cost of all T.& P., labour etc.

Supply & laying coarse sand in reversed filter below CC blocks for reliefs water pressure including cost for proper completion of work including cost of all T.& P., labour etc.

Centering and shuttering for R.C.C work in different parts of structures with all leads and lift required for proper completion of work including cost of all T.& P., labour etc.

Cutting ,bending, binding & placing TMT steel for reinforcement with cost of binding wire. in all structures required for proper completion of work including cost of all materials, labour carriage, rehandling and T&P etc.

Supply & fixing 20mm thick joint filler bord as per direction of engineer in charge; including cost of all material, labour, T&P etc. required for proper complection of work.

Providing expansion joint in R.C.C slab; fabricated expansion joint of angle iron & M.S flateand joints filled with sealing compound as per drawing & direction of engineer in charge,with cost of all material, labour, T&P etc. required for proper completion of work

Laying CC A20‐M20 in foundation of structures with cement (OPC 43 grade) corse sand of F.M. not less than 2.0 and hard stone ballast (10‐20 mm size) including lead upto 60.00m, lift upto 3.0m. mechanical mixing & mechanical vibration including cost of centering and shuttering required for proper completion of work including cost of all T.& P., labour etc.

Laying Stone boulder 40 to 60kg into launching apron required for proper completion of work including cost of all T.& P., labour etc.

Laying RCC A20‐M‐30 with cement (OPC 43 grade)corse sand of F.M. not less than 2.5 and crushed stone grit 4.75mm to 20mm including lead upto 60.00m, lift upto 3.0m. mechanical mixing & mechanical vibration but excluding cost of centering and shuttering required for proper completion of work including cost of all T.& P., labour etc.

Providing ,fixing and erecting 100 mm dia M.S. pipe railing over crash barrier as per drawing and technical sepecification .

Painting on steel railing two coat of syenthetic enamwl paint on new surface with superior quality approved make and one coat of red oxide primer after sand papering and cleaning of surface including cost of all material ,labour T&P required for proper completion of work.

Painting on crash barrier two coat of syenthetic enamwl paint on new surface with superior quality approved make and one coat of red oxide primer after sand papering and cleaning of surface including cost of all material ,labour T&P required for proper completion of work.

Construction of granular sub‐base by providing close graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density completed as per MORTH specification clause 401

Providing, laying and spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub‐base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH specification clause 436

Providing and laying of D.B.M. @ 4.5% bitumen vg 30

Providing and laying of BC. @ 5.6% bitumen

Providing and applying tack coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying at the rate of 0.3 Kg./Sqm. Using mechanical means as per MORTH specification

Dewatering with all cost of power/POL machines,pump well,paint system & operator etc with assembling and dismantling of equipment required for complection of work, labour, T&P etc.

Earth work in back filling and filling embankment in all type of soil including lead upto 30 m and lift upto 1.5 m, with manual compaction & dressing to profile required for proper completion of work including cost of all T.& P.

S/L local sand under boulder pitching in launching apron including cost of all T&P labour etc. required for proper completion of work.

Dismantling 1:4:8 lime or cement concrete150 mm thickness

Dismantling 1:4:8 lime or cement concrete150 mm thickness

Dismantling 1:4:8 lime or cement concrete150 mm thickness

Dismantling reinforced cement concrete including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60M.

Dismantling reinforced cement concrete including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60M.

Dismantling brick work or stone work in lime or cement mortar including stacking of materials as directed by engineer-in- charge within a distance of 60M.

Dismantling brick work or stone work in lime or cement mortar including stacking of materials as directed by engineer-in- charge within a distance of 60M.

M/s Vishal Construction

NIKHIL CONSTRUCTION