SPL REPAIR TO BLDG NO P-5/1,P-5/2,P-5/3,P-5/6, P-5/14, P-5/15, P-5/16, P-5/17, P-5/18 AND P-5/19 QTRS GOVT MD ACCN, BI LINE UNDER AGE B/R -II AT GE JHANSI

Amount

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering in two coats 15mm (10mm+5mm) thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth (without using extra cement) and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed

M&L for rendering 10mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work built in cement or cement lime mortar etc complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as specified and directed.

S&F of 30mm thick flush doors shutter, solid core construction, with partical board core and plywood face panel commercial type on both sides complete all as specified and directed.

S&F butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.

S&F butt hinges, 100 mm long, extruded aluminium alloy,with mild steel hinge pin anodised complete all fixed type C-21 specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed.

M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified and directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for 40mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone agg) in flooring finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.

M&L for 28mm width Glass dividing strips, 3 mm thick and inserted in position conform to design complete all as specified and as directed.

M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as specified and directed.

M&L in repair Vitreous china squatting pattern Orissa pattern water closet pan of size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor fixed in repair complete all as specified and directed.

M&L for PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

M&L for 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed.

M&L for PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

M&L for PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

M&L for PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

M&L for PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

M&L for PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

M&L for PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

M&L for PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

M&L for PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

M&L for PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 500 Ltr each (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including disconnecting existing water tanks setting aside or lowering for removal to stores including cleaning and removing all scale and dirt etc from tanks complete all as specified and directed.

S&F in repair 15mm bore fency bib tap Chromium plated with wall flange Bib taps complete all as specified and directed.

S&F in repair CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with flange complete all as specified and directed.

S&F in repair PTMT grating doom 100mm dia with hole for waste pipe complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugate sheet in Roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets ,ridges etc as in ceiling complete all as specified and directed.

S&F mild steel (Fe 410W, Gde E 250) as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beams, tee, angle, channels or flat sections) etc complete all as specified and directed .

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint ,over a coat of alkali resistant primer over outer surface of wall, complete all as specified and directed.

M&L for applying two coats of oil bound distemper on walls, white or tinted using applying over a coat of chalk whiting primer complete all as specified and directed.

M&L for preparation of old plastered surfaces on wall and applying one coat of Cement based paint complete all as specified and directed.

M/S Chadha Brothers (BID ID -3122634)

HARNAM SINGH ANIL SINGH (BID ID -3128559)

ADARSH ENTERPRISES (BID ID -3135874)

M/S Kesav Dev Agarwal (BID ID -3125539)

M/s Jagdish Chandra Arora (BID ID -3127792)

Ms Prakash Raikwar Traders Co. (BID ID -3125565)