Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹27.5 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹29.4 L+₹1.8 L (6.58%)Rejected-Finance | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹32.9 L+₹5.4 L (19.6%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tapan Naurial, Lt Col, GE
GE 864 EWS, PIN-913864,C/o 56 APO
Addn Alteration water storage tank with iron staging for Bldg No 1256, 1257 and 1258, of Chinar Offrs Mess and Provn of tiles in Jhelum Offrs Mess at BB Cantt, Srinagar.
2022_MES_571085_1
864/WS-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹19,000
Yes
27 Apr 2023
24 Dec 2022
18 Feb 2023
24 Dec 2022
16 Feb 2023
4 Feb 2023
Amount
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth round, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.
M & L for Plain Cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) , in foundations, filling and mass concrete, complete all as specified and directed.
Rolled steel framed work as in doors or gates of angle or staging for water tank or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe 410 -W (Gde E- 250) quality 'A' complete all as specified and directed.
M & L for preparation of new steel or iron surfaces of any description , exceeding 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F GI tubing 15mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.
S&F GI tubing 20mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.
S&F GI tubing 20mm dia medium grade with all fittings laid in trenches etc complete all as specified and as directed. Note: Quoted rate shall deem to be included cost of necessary earth work.
Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), complete all as specified and as directed by Engr-in-Charge.
Demolition of brick work or stone masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:4 as in manhole, wall, Drain etc complete all as specified and directed by Engineer-in-Charge.
M&L for 15 mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparing surfaces plastered or unplastered distempering walls with 2 coat of distemper oil emulsion white or tinted over a coat of wall care putty and priming paint, complete all as specified and directed
M&L for Preparation of new plastered surfaces by applying two coats of cement base paint over a coat of alkali resistant cement based priming paint complete all as specified and directed
M&L for colored glazed ceramic tiles in vertical surface 350x 250x 7 mm or 450X 350X 7mm or 300x 450x 7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match over and including rendering/ backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed.
S&F for Gun-metal, globe or gate valves 25mm fixed with GI reducer (25 x 20) and iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F for Gun-metal, globe or gate valves 20mm fixed with GI reducer (25 x 20) and iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for Lagging to pipes 15mm bore used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 reinforced with chicken mesh wire netting 25 gauge, 20mm mesh and POP complete all as specified and directed.
M&L for Lagging to pipes 20mm bore used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 reinforced with chicken mesh wire netting 25 gauge, 20mm mesh and POP complete all as specified and directed.
S&F for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed.
M & L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bedding 15mm thick in cement mortar 1:4, complete all as specified and directed.complete all as specified and directed.
M&L for colored glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in site or color cement to match over and including rendering/ backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed.
M&L 100 mm thick plain cement concrete 1:4:8 type D-2 ( using 40 mm graded stone aggregate), as in sub base of floors finished even and fair all as specified and as directed.
Chequered cement concrete tiles 20cm x20cm x 25mm thick, with grey cement and no pigments, set, jointed and pointed in neat cement slurry, over and including screed bed or bedding layer 20mm thick in cement mortar 1:6, complete all as specified and directed.
Providing precast reinforced cement concrete in 1:2:4 , type B1( using 200 mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4, complete all as specified and directed.
M & L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L 50 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate), as in floors finished even and smooth, all as specified and as directed.
M&L for 60mm thick Machine pressed factory made Precast rubber moulded cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-35 of any size & shape confirming to IS 15658-2006 as directed & including 40 mm thick sand cushion complete all as specified & as directed.
Rolled steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. not exceeding 10 kg each brackets, conforming to Fe.290. Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out hard/ dence soil complete all as specified and directed.
Use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, roof beam ,Lintel beam sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complet all as specified and directed
M&L for RCC M -25 Reinforced cement concrete (design mix) in Foundations, including rafts, footings, oundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complet all as specified and directed.
Use & waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete, all as specified and directed.
M&L for RCC M -25 Reinforced cement concrete (design mix) in Columns, pillars, piers, posts and struts, complete all as specified and directed.
Use & waste Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, antilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complet all as specified and directed
M&L for RCC M -25 Reinforced cement concrete (design mix) in beams, cantilevers, bressumm ers, lintels over 1.5m span, complet all as specified and directed.
M & L for TMT mild steel bars 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as stirrups, spacers and binders, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed
Removing excavated material not exceeding 50 m and depositing where directed at a levelnot exceeding 1.5 m above the starting point, complete all as specified and directed.
Hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed
M&L 75 mm thick plain cement concrete 1:2:4 type B-2 ( using 40 mm graded stone aggregate), as in floors finished even and smooth, all as specified and as directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:6 as in manhole, wall, Drain etc complete all as specified and directed by Engineer-in-Charge.
M&L for 15 mm thick rendering in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
Rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde E- 250) quality 'A' complete all as specified and directed.
Providing 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed by Engr-in-Charge.
S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all a specified and directed.
S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all a specified and directed.
Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all a specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
150 mm long,aluminium,anodised, barrel tower bolts of extruded section, complete all as specified and directed.
150mm size aluminium handles,cast type,anodised complete all as specified and directed.
250 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.
S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium ections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedcomplete all as specified
4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified
S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6mm dia . GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40X3mm size 60mm long complete all as specified
Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions all as specified and directed.
Non-skid Ceramic tiles 7 to 8 mm thick ( square) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.
Vitreous China wash basin, white, flat back , size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin, long screwed shanks and fly nuts flange end bedded in red lead cement and other end, complete all as specified.
Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) 32 mm, complete all as specified and directed.
Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.
10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete all as specified and as directed by Engr-in-Charge.
Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, suitable for urinals, (Minimum weight 15mm-50gms) 15 mm, complete all as specified and as directed by Engr-in-Charge.
Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms) 32 mm, complete all as specified and as directed by Engr-in-Charge.
Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed by Engineer-in-Charge.
S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.
Stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore 15mm, complete all as specified and directed by Engineer-in-Charge.
Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms), complete all as specified and directed by Engineer-in-Charge.
S &F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms), complete all as specified and directed by Engineer-in-Charge.
S &F PVC connections 15mm size with PTMT nuts of t length 600mm, complete all as specified and directed.
Cutting into existing manholes of internal dia of pipe 150 mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required completed all as specified
M&L 150mm bore of pipe in rainfoeced concrete pipe class NP 2 laid jointed, complete with collers completed all as specified
M&L PCC 1:3:6 type C-2 concrete bed to drain pipes 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested; in completed all as specified
Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
20 mm Gun-metal, globe or gate valves, iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
15 mm Gun-metal, globe or gate valves, iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directe
M&L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
M&L for 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed
S&F in chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed by Engineer-in-Charge.
M&L for Australian wood paneling 10mm thick including 12mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats), complete all as specified and directed.
M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including medium grade PVC casing and caping on surface with MS terminal boxes ( not less than 1.0 mm thick )and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required for one light point controlled by one way switch point wiring complete all as specified and directed.
Description all as per item No 83 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed.
M&L for switch piano flush button type 5 Amp single pole one way complete all as specified and directed.
M&L for switch socket combination 2 in 1, 3 pin 5 and 15 Amps piano flush type single pole one way complete all as specified and directed.
S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testting complete.
S & F LED light fitting fixture 20W, 6500K, ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified.
S&F storage water heater 25 Litres capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts etc complete all as specified and directed by Engr-in-charge.
S&F stop/angle valve (ISI marked), 15 mm dia fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or brass ferrule complete all as specified & as directed.
S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.
S&F MCB SP 6 to 30 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.
S&F MCB SPN 32 amps, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity all as specified and directed .
Supply & fix ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz AC supply of Havells or equivalent of CG/Bajaj including connecting to ceiling rose all as required or directed.
M&L in replacement of 6 Sqmm 1100volts grade heavy duty PVC insulated multistranded aluminium conductor and overall PVC sheathed in service connection suspended by insulated hangers not more than 1m apart incl 4mm suspension GI wire one twin core cable flate porcelain insulators etc.
M & L for earthing with galvanized steel earth plate electrode 600 x600 x6 mm thick buried directly in ground (earth plate not less than 3.25 mtr deep below the normal ground level ) with top edge of plate not less than 2.5 mtr below the normal ground level connected to galvanized earth wire of 4 mm thick by means of nuts bolts, washers, check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) medium grade GI watering pipe 20mm dia with funnel and wire mesh and 40 mm bore GI pipe light grade proection pipe up to test point etc including excavation and charcoalt ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I
S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed.
Supply and lay pipe galvanised Medium Class including fitting but 20 mm(1") dia complete all as specified and directed.
M/S AKMAL CONSTRUCTIONS
M/S BASHIR AHMAD MIR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .