GE/BAS-33/2022-23 CERTAIN REPAIR TO OTM AND MD ACCN IN POCKET A AT BASOLI GRN UNDER GE BASOLI

Amount

M & L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition of old Brickworkor stone masonary complete all as specified and as directed.

M & L Brickwork ( Except bricks) with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition of old Brickworkor stone masonary complete all as specified and as directed. Note :- Bricks obtained from dismantling shall be reused as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed including rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement and applying two coats of oil Bound destemper after prepration of newly plastered surfaces, complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement and applying two coats of cement base paint after prepration of newly plastered surfaces,complete all as specified and as directed.

M & L in repair for rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement including applying two coats of white wash after prepration of surfaces, complete all as specified and as directed.

M & in repair rendering 15 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement and applying two coat of oil bound distemper on new plastered/putty surfaces of walls including prepration of surfaces in any locations, complete all as specified and as directed.

M & L in repair, rendering 10 mm thick in CM 1:6 on any surfaces of brick work, finished even & smooth without using extra cement in any locations, including applying two coats of white wash after preparing new plastered or unplastered surfaces of ceiling, complete all as specified and as directed.

M & L in repair rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement and applying two coat of cement base paint after preparation of new plastered surface of walls in any locations, complete all as specified and as directed.

M & L for complete removal of existing treatment on walls/ceiling and making true uniform surfaces by applying 3mm thick wall care putty by roller on old wall/new plastering surface, and makink surface smooth, complete all as specified and as directed.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash at any locations, complete all as specified and as directed.

M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified.

M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper upto any height filling the gap or unequal surface with cement mortar /chalk whiting/Putty in any shade complete all as specified.

M & L for preparation of old decoratede plastered or un plastered surface of wall and applying one coat of cement base paint including scaffolding and filling the gap or unequal surface with cement mortar /chalk whiting/Putty work on height, the tint of cement base paint shall be to match existing shade of walls with and roof complete all as specified and as directed.

M & L for preparation of old painted surfaces of wood or wood based surface of any description over 10 cm with or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel of any description over 10cm with or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old decorated surfaces of wall and facia and applying one coat weather proof apex paint upto Third Floor of any tint etc complete all as specified and directed.

Taking down, dismantling of broken/loose portion of chajja , facia upto 450mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary form work/scaffolding and matching with existing surface of facia, (including white wash / colour wash or cement base paint/Apex Paint ) complete all a specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

S&F machine cut kota slab fooring 18 to 20mm thickness over and including 20mm thick screed bed or bedding layer of CM (1:6) laid and jointed with gray cement slurry mixed with pigment to matches the shade of the kota stone including rubbing and polishing, complete all as specified and directed.

S&F Machine cut Kota stone skirting after taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles and brooming surface to receive the machine cut kota slab skirting 18 to 20 mm thickness including rubbing and polishing complete all as specified and directed.

M & L Plain cement concrete type E2 (1:5:10) ( using 20mm graded stone aggregate) as in subbase for EWC etc complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring including finishing the top surface even & smooth, without using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

M&L for 50 mm thick Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed.

M&L for 50mm thick PCC (1:4:8), type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings, complete all as specified and as directed.

M & L Chequred cement tiles with grey cement and pigment 30cmx30cmx25mm thick set, jointed in neat cement slurry including CM1:6 all as specified and directed.

M & L for heavy duty virtified tiles of size 300mmX300mmX 8 to 9mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cement mortar finished cement concrete surface fair & Smooth without using extra cement complete all as specified and directed. Make :- Endura of Johnson, Durastone of somani or equivalent in Kajaria, Cera as approved by GE.

M&L for 50mm thick Plain cement concrete padding (1:2:4) type B-0 ( using 12.5 mm graded crushed stone aggregate) , padding shall be furnished even and smooth without using extra cement, complete all as specified and as directed.

M& L applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 15 mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L for Glazed ceramic tile 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.

M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including Moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab all as specified.

S&F structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B including dismantling wrought iron or mild steel work of any descrfiption not otherwise provided forcomplete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50 mm (TCT) thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50 mm (TCT) thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete fixed in repair, all as specified and as directed.

S & F in repair Plastic Seat Cover white / any colour as per matching of existing Water closet (Pedestaj Pattern) with necessary screws complete all as specified and directed.

S& F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed.

S & F in repair Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs all as specified.

S & F in repair Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified and as directed.

S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified and as directed.

S & F Stainless steel gratings with or without Hole 100/125/150mm dia fixed with cement motar/ white cement, complete all as specified and as directed.

S&F in repair waste pipe for WHB/Urinal/Sink for 32/40mm dia all as specified & as directed.

S & F 15mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F 20 mm bore tubes, medium grade, galvanised with and including all fittings including concealing to walls, floors, or ceiling or laid in floors etc including taking down old steel GI pipe complete all as specified.

S & F in repair Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified.

S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S & F in repair Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified.

S&F in repair Brass Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.

S&F in repair Brass Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls

S&F Brass chromium plated tubular towel rail, 20 mm dia 'D' type 60 cm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union all as specified.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified. Make:- Nirali, Blue star, Neelkanth

S&F waste coupling of (half or full threaded), (32/40mm dia, minimum weight 45gms) for sink / WHB /urinal complete all as specified and as directed.

Supply and fixing in repair stainless steel plate rack 750 x 600 x 230 mm deep with spoon holders , shelves, fix to wall with suitable screws, washers, nut-bolts and necessary drilling etc. Including making good to disturbed portion in cement mortar (1:4) to wall etc , complete all as specified and directed.Make:- Nirali, Blue star, Neelkanth

S&F in repairs for 110/110 mm bore PVC (SWR) 'P' trap including jointing with solvent cement all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S & F PVC SWR Bends in any radius 110 mm bore with access door in repair all as specified and directed..

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair all as specified and directed..

S&F PVC (SWR) Vent cowl 110 mm bore in repair all as specified and directed..

S&F PVC (SWR) Vent cowl 75 mm bore in repair all as specified and directed..

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.Make Cera/ Jaquar/Parko

S&F in repair Wall mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply only accessories (legs,nipple,cup etc.) for CP wall mixer/Basin mixer suitable for 15 mm dia pipe, complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but n. exc. 5 cm in length, thickness of metal to be welded exc,6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.

S & F in repair Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.

S&F rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including 25 mm Brass Float valve including taking down existing tank complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm to 04 Sqm each and removing from site complete all as specified.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed .

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed.

S&F for factory made pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame including complete PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc all as specified and as directed.

S&F for factory made pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame including complete PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc all as specified and as directed.

M & L 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

M & L factory made 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.

M & L for factory made solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified.

S&F in repair 18/19mm thick prelaminated interior grade prelaminated one side with one side decorative choice and other side white lamination fixed with screw as in cupboard/kitchen cabinet shutters fitting including Cupboard hinges , Alu handle , towerbolt, hasp and staple , piano hinges and channel where required size as per dirn of Engr in Charge including taking down of old Cupboard of any type complete all as specified and as directed. complete all as specified and directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed.

S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.

S & F 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.

S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.

S & F Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and as directed.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed.

S&F harrison rails (curtain rails), mild steel chromium plated with fixing brackes, stops, rollers etc. all as specified.

S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mess and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide including taking down of old windows complete all as specified

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.

S&F in repair 3.0mm thick sheet glass in repair , ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified, complete all as specified.

S&F in repair 3.0mm thick figured ( frosted) glass in repair , ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified, complete all as specified.

M & L Galvanized mild steel wire-cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

M & L for fixed in repair Galvanized mild steel wire-cloth 0.48 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Supply and fix for natural colour anodized aluminium window with frame of size 101.60x44.45x1.60 mm of approved manufacture fixed in position on wall with rawl plug and screws and window shutter as per direction given by Engr in Charge and glass pane 5 mm thick coloured fixed with rubber gasket and beading/glazing clip size 19.00X17X 0.70 mm (weight 0.097 kg /RM of both side), including suitable aluminium handle, tower bolt hinges and including aluminium flyproof shutter as per direction given by Engr in Charge including taking down old U/s windows of any type all as specified and directed.

Supply and fix for natural colour anodised Aluminum Door shutters side hung type with safe bars locking rails locking arrangements and Hydraulic floor door closing arrangements including necessary joining cleats glazing clips rubber packing anodised aluminum snap beading screw suitable handle 150mm size etc and including 5-12mm thick sheet glass fitted type black in any colour, size of lock rails 44.45x81.50mm side rails 85.85x44.45mm, top rail 83.5x44.45mm, bottom rail 150x44.45 and thickness of aluminum member 1.50mm thick including anodized aluminum frame of size 101.60x44.45 and thickness of member 2mm including fitting arrangements complete including taking down old U/s door of any type all as specified and directed.

S & F in position suspended false ceiling system using E - grid suspended ceiling grid system . The size of grid shall be 600x600 mm with GI frame work main runner 38X24 mm cross Tee 25X 24 mm and wall angle 24mmX24mm using 8mm thick ceiling panel laminated with PVC film on front face and foil back availalble in due drop textureas per IS -2095Part-I 1996 fixed in the grid suspended ceiling grid system duly suspended by 4 mm dia GI bar hangers from the purlins of the roof with butter fly clips all as specified

Repair to steel rolling shutter without Ball Bearing/ gear operator type and repair of locks, hold fast etc and repair of any type of accessories as per site requirement and making them openable easily all as specified and directed.

M&L for Repair of Aluminium Doors/Windows of any size including rubber gaskat , beading/ Glazing clip , raw plug/ screws including 5mm thick or any thickness plane glass/ frosted glass/ toughened glass of any thickness and including repair of alu Channel Frame/shutter including suitable Alu handle , tower bolt all as specified and directed . NOTE:- Contractors are requested to visit the site prior to quote rates. The item shall be executed on written complaint and order of GE only.

M&L "Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer." complete all as specified.

Taking down old damaged SGSW pipes including necessary excavation, supply and jointing of UPVC underground drainage pipe (UDS) type 'B' 160mm dia with thickness 4mm (min) and pressure rating SN4 as per IS-15328, jointed in cement solvent solution complete including testing, haunching against the sides of pipes in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including returning, filling in and disposal of surplus soil to a distance n.exc. 50m complete all as specified and as directed. Make : JAIN IRRIGATION/ AJAY FLOW GUARD/ASTRA/ASHIRBAD/SUPREAM.

S & F 12 mm Toughened Glass including all accessories like hinges , clips , handle steel etc fitted to bath cabinet and other purpose including suitable hydraulic machine for rolling complete all as specified and directed. Make :- Saint Gobain, Modiguard float.

S & F in repairs Vitreous china wash basin, white, flat back, average size750x450 mm Vanity type/ with wooden Cupboard having good looking shutter including Looking Mirror in a appropriate frame width having the same of washasin Grating and waste pipe fixed complete all as specified and as directed.

S & F Oval shape slim/thin ceramic washbasin size 450mm length x 450mm width x 150mm Height Glossy Finish counter top any colour fixed in position, including cutting hole in counter slab for waste pipe and connections, complete all as specified and directed.

S & F in repair CP Brass bottle trap having minimum water seal 25 mm all as specified and directed. Make :- Kohler, Essco, Jaquar

BALKRISHAN GUPTA AND SONS

G.M. ENGINEERING SERVICES

sunny construction

Om Sai Ram Builders

Shiva Builders