REPAIR TO BOUNDARY WALL FENCING RCC JELLIES AND OTHER BR RELATED WORKS UNDER AGE BR I OF GE W AGRA

Amount

Demolition of brick work masonery built in cement mortar complete all as specified and directed.

M&L of brick work in CM 1:6 using sub class 'B' bricks straight or curved on plan exc 6m mean radius, etc complete all as specified & as directed.

M&L of brick work in CM 1:6 using sub class 'B' bricks (Except bricks) straight or curved on plan exc 6m mean radius, etc complete all as specified & as directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & as directed.

M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping, benching etc including necessary use & waste of form work complete all as specified and directed.

M&L 15mm thick cement plastering in cement mortar 1:4 on other than fair faces of brick work finsihed even and smooth without using extra cement complete all as specified & as directed.

M&L 15mm thick cement plastering in cement morter 1:4 on fair faces of brick work finsihed even and smooth without using extra cement complete all as spd dir.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion (Apex) over a coat of primer complete all as specified and directed.

Dismantling mild steel work of any description complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded crushed stone agg in fdn, filling and mass concrete complete all as specified and directed.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc;flat iron fillets(for securing wire mesh etc) including all necessary drilling ,bolting or riveting,etc, and similar works conforming to Fe-410-0 or Fe-310-0. complete all as specified and directed.

M&L preparation of new steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S & F in repairs Chain link fencing , made out of 3.15mm dia wire and 100mm mesh size straining and fixed with bolts , nuts and washers including binding wire complete all as specified and directed. Note: Nut and bolts and washer and MS flat line bars/flats bars shall be measured and paid separetly.

M & L in repairs mild steel round bar 10mm dia and over cut to length bent to shape as required as in straining bars complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 5 cm long & diameter of neck 5 to 10mm complete all as specified and directed .

S&F in repair galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc (each line wire to be measured) complete all as specified and directed.

Taking down one way Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately) complete all as specifeid & as directed.

M&L for precast cement concrete 1:2:4, type B0 (using12.5mm stone aggregate) as in louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4 including all mouldings complete all as specified and directed.

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M/S Mamta Electricals