SPECIAL REPAIR TO BUILDING NO P-988 AND P-990 AT AF STN AGRA

Amount

Demolition of brickwork or stone boulders masonry built in Cement Mortar including all quins, arches, pillers etc complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radious, old size built in CM (1:6) including demolition of brick work built in CM complete all as specified and directed.

M & L for Brick work with sub-class with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M & L for coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour and including 10mm thick rendering in CM (1:4) and set and jointed in neat cement slurry and pointed with white cement complete all as specified and directed.

M & L for glazed ceramic colour tiles 300x200 x7mm thick in vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over and including screed bed 15 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed.

Demolition of RCC chajjas, slab, beam and similar work complete all as specified and directed.

M & L for formwork to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete complete all as specified and directed.

M & L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. for rough finished surfaces of concrete, complete all as specified and directed.

M & L for Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone aggregate as in chajjas complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20mm graded stone aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all complete all as specified and directed.

M&L TMT bar 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and directed.

M&L TMT bar 6 to 8 mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and directed.

M & L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

M&L for two coats of synthetic enamel paint to new steel surfaces of any description, over 10 cm in width or girth, not otherwise described over and including one coat of red oxide primer , preparation of surfaces etc complete all as specified and directed.

M & L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/S Fosroc or equivalent as approved by GE) as per manufacture instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/S Fosroc and nitobound AR from M/S Fosroc or equivalent as approved by AGE) in the proportion recommended by the manufacture complete all as specified and directed.

Taking down cement plaster of any description etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on other then fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete as in ceiling of slab finished even and smooth without using extra cement complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings and making grooves(of uniform size 15 mm x 15 mm) including putting aluminium channel in groove of required size and taking down of old plaster and removal out of MOD land complete complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

M & L for two or more coats of distemper oil emulsion on newly plastered wall surfaces over a coat of Priming with alkali resistant primer including preparation and application of 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two or more coats of 100% premium acrylic emulsion paint exterior grade paint over a coat of exterior primer including preparation and application of 1 mm thick wall care putty complete all as specified and directed.

M&L for preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment of old decorated surface of walls and applying two or more coats of oil bound distemper including preparation and application of 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old surface of walls and applying two or more coats of 100% premium acrylic emulsion paint exterior grade paint over a coat of exterior primer including preparation and application of 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old painted steel surface & applying a coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work not exceeding 15cm in width or girth; including cutting to edges, all mitres and stopped ends, etc with scaffolding arrangements to work at two floor height of bldgs complete all as specified and directed

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

S&F steel windows with side hung shutters (glazed and gauzed) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, including for painting with one shop coat of zinc chromate primer complete all as specified and directed.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening with stainless steel screws of required size complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixed to frame at site as shown on drawing complete all as specified and directed.

S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (Standard Mark as per IS 2202 (Part 1):1999 ) fixed to chowkhats complete all as specified and directed.

S&F 35 mm the second class hard wood kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated and prepared to receive glass/gauze (with any number of sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S&F for MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows complete all as specified and directed.

S&F 100 mm size butt hinges Mild steel medium weight complete all as specified and directed.

S&F 75 mm size butt hinges Mild steel medium weight complete all as specified and directed.

M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.

S&F Mild Steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed to aluminium or wooden shutters complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40mm including fixed to wooden, steel or aluminium windows/doors with stainless steel wire staples or necessary accessories complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality for wooden/steel window and glazing with oil putty in squares or fixed with beads in n.exc 0.50 sqm each pane, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including fixed to wooden, steel or aluminium windows/doors with stainless steel wire staples or necessary accessories complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Kicking plates for doors, 1.00 mtr X 0.20 mtr of size, made of galvanised iron sheet of 1mm thick, fixed with galvanized screws complete all as specified and directed.

S&F powder coated anodized aluminium sections of required size for door, windows frames ventilator with one or more rebates including of required size jointing cleats, screws sash fasteners, rollers to move shutters, plug for fixing with walls, columns etc complete all as specified and directed.

S&F powder coated anodized aluminium door shutters, aluminium sections weighing 0.55 kg /m incl necessary joining cleats , glazing clips , rubber packing , anodized aluminium snap beading ,screws, rollers and locking assembly, handles 2 of each shutters , hinges as required complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 (1:3:6) (using 40 mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement complete all as specified and directed.

S&F fix in repair triple layer 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded lid top) white in colour hoisted and fixed in position including 20 mm polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including concealed groove cutting all fittings complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized with all fittings and fixed complete to walls ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 25mm bore complete all as specified and directed.

S&F 25 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls ceilings or laid in floors complete all as specified and directed

S&F in repair PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern. complete all as specified and directed.

S&F in repair 15 mm angle stop valve chromium plated fancy type complete all as specified and directed.

S&F in repairs CP Bib taps 15 mm bore long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type. complete all as specified and directed.

S&F in repair for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with new trap and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demolition of PCC / Lime concrete bedding existing pan complete all as specified and directed.

S&F in repair counter wash hand basin vitreous china wash basin white flat back size 550x400 including supplied and fixed angle iron brackets or erecting stand, PTMT waste coupling, waste pipe 32 mm complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints 125mm size in square with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Chromium plated Towel rail 600mm long of fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.

S&F in repair Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and directed.

S&F in repair soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.

S&F as in repair 15mm dia pillar tap chromium plated cast copper alloy with capstan head, fancy type screwed down for iron pipe complete all as specified and directed.

S&F in repair Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed.

M&L vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white ( minimum ) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm complete all as specified and directed.

S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall with clamps complete all as specified and directed.

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall with clamps complete all as specified and directed.

S & F PVC SWR pipes 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm dia fixed to wall with clamps complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair PVC floor trap 110mm dia including jointing to waster pipe fixed in cement concrete type- B1 (1:2:4) complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) single (Single T) equal or unequal any radius complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) single (Single T) equal or unequal any radius complete all as specified and directed.

S&F in repairs harrison curtain rails, 20 mm dia, mild steel, chromium plated with fixing brackets and domes, stops, rollers etc. complete all as specified and directed.

Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cutting & up rooting tree roots/Vegetation growth & removing the debris from the premises upto 500 m from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.

M&L for screed bed 15 mm thick in CM 1:4 on RCC roof slab/terrace surfaces with mixing of WPC @ 2% by wt of cement including finishing even and smooth without using cement. complete all as specified and as directed.

M&L for water proofing treatment to roof with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyester non woven fabric ( weighing n. less than 160 gm / sqm ) shall be applied over and including applying a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coat of bituminous primer @ 0.30 ltrs/Sqm surface, application of APP modified membrane and joint shall be by torch application. The overlaps shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction complete all as specified & directed.

Demolition of cement concrete (unreinforced ) above ground floors n exc 15cm thickness i.e from RCC roof slabs/terrace complete all as specified and directed.

M&L PCC ( 1:2:4) type B0, using 12.5 mm graded stone aggregate padding in averaging on RCC roof slab or terrace with using WPC @ 2% by mix weight of cement including finishing even and smooth with using extra cement complete all as specified and directed.

Demolition of unreinforced cement concrete of any description & in any portion not otherwise specifically provided for & removal of demolition material to out side MOD land complete all as specified and directed.

M&L for PCC (1:2:4) type B-O (using 12.5mm graded aggregate stone aggregate) as in sunken floor for correction of slope complete all as specified & directed.

M & L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in sub base complete all as specified and directed.

Materials & labour for water proofing treatment to sunken floors with the following courses of treatment :- (a) Apply first layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.126 kg/sqm all as specified. (b) Apply second layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic polymer modified cementitous composite compounds @ 0.253 kg/sqm including cleaning the surfaces and all as specified. (c) Apply 200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment all as specified. Note :- The slope of slab shall be 1:20 towards the corner of outer walls and UPVC pipe of 50mm dia be inserted at corner projecting out side 10 cm for draining of excess water from sunken floor all as directed.

M&L for cement concrete type E-2 1:5:10 (using 40mm thick graded stone aggregates as in foundations, sunken portion filling and mass-concrete complete all as specified and directed.

S&F Mild steel, plain, black sheet 1.25 mm thick in crumple joints, wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles, etc. as required complete all as specified and as directed.

M&L for precast cement concrete louvers and jallies set in cm 1:4, Type B0, 1:2:4 (12.5 mm graded stone aggregate) 45 mm thick (measured solid), including all mouldings but excluding frame including demolition of existing jallies complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & capping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specified and directed.

M & L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including MS pressed steel sheet sunk box with 1.2mm thick ISI marked laminated Bakelite sheet fixed with chromium / nicckel plated screws and washers for switches and sockets, including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conducting and making good disturbed surface area and white wash/colour wash to matching with the existing colour and complete all as specified and directed .

All as per srl item No 112 above but for 3 pin 5 amps socket outlet independent board complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet sunken box with 3mm laminated Bakelite sheet cover ISI marked suitable for an independent 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface complete all as specified and directed.

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F switch piano flush type one way 16 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5/6 amps flush type 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed. Note : Ceiling rose considered for all new/existing lights, Fan & Exhaust fan.

S&F in replacement of existing unserviceable light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and directed. Note:- Power factor should not be less than 0.95 Make- Halonix- , ORIENT Cat part No-LBLN-20-C-AL /BAJAJ-BCLAB 20W LED P/HALONIX- HLB-03-20-CW-AL-SQ

S&F in replacement of existing unserviceable tube light fitting with energy saving decorative batten type 10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardant engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/BAJAJ-BCLSB 10 W WH/ Halonix Cat part No- HLB-03-10-CW-AL-SQ

S & F bedside light of 3 W capacity of output 70-80 lumen having adjustable heads to change its focus area complete all as specified and directed. Make:Philips 48042/30/31 or equivalent in Havells/Crompton.

Taking down old unserviceable ceiling fan, dismantling electric connection and depositing to EM store complete all as specified & directed

Supply and Fixing BLDC 5 Star ceiling fan 1200mm sweep with remote suitable to work on single phase AC 230 volts 50Hz complete with connecting electrically to ceiling rose or connector black using PVC insulated and over all sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site and directed. Make -BAJAJ- ENERGOS 26 BEE 5 Star or equivalent to Havells/Crompton

S & F Air Ventilating fan 300 mm dia metallic body heavy duty single phase 230 volts 2200 rpm including fixing and connecting the fan with 3 core PVC insulated and over all sheathed flexible copper conductor cable from ceiling rose/PVC connector to exhaust fan including making suitable hole in wall, and make good disturbed surface of wall including louvers of suitable size, fasteners, nut ,bolts etc complete all as specified and directed. Make - Bajaj/Havells/Crompton

Taking down old unserviceable geyser, dismantling electric connection and depositing to EM store complete all as specified & directed

S&F of water heater storage typer 35 Ltr, 5 star rating with titanium coasted MS tank housed in polycarbonate body having thermostate with external knob, connection pipe complete including all accessories and suitable for working on high pressure pumps and fixing on wall with 4 Nos of fasteners, with plug Top 15 Amps complete all as specified and directed. Make : Havells- GHWAHPTWH035/Bajaj- Shakti/Crompton-Radiant Dix

m/s meetu enterprises

deva engineers

M/s M S Sharma and Co.

Sethi Brothers

garg construction company

S R BUILDERS

Asha Construction

HARI BUILDERS