Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.0 LAdmitted-Finance | -23.23% | ₹3.0 L | L1 | Admitted-Finance |
| 2 | L2₹3.4 L+₹32,438.54 (10.7%)Admitted-Finance | -15.00% | ₹3.4 L+₹32,438.54 (10.7%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical In Affidavit is not fill as per NIT condition |
Tender Value
₹3.9 L
EMD Value
₹7,880
Closing Date
15 Sept 2026, 4:00 pmClosed
Executive Engineer PWD R and B Division Hiranagar
Executive Engineer PWD R and B Division Hiranagar
boq
2026_PWDJK_323210_1
e-NIT No 61 of 2026-27/ 3088-98 /PWD/HGR Dated 02-09-2026
Open Tender
Civil Works - Roads
Percentage
30 days
HIRANAGAR
nit
8 documents required · 8 mandatory
₹600
Executive Engineer PWD R and B Division Hiranagar
₹7,880
21 Sept 2026
3 Sept 2026
16 Sept 2026
3 Sept 2026
15 Sept 2026
3 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing on wall face unplasticized - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter | 15 | rmt | 366.3 | ₹5,494.5 |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres All kinds of soils : | 64.8 | cum | 256.85 | ₹16,643.88 |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)incl. all leads, lifts & carriage of material by MT/ H.L. | 8.1 | cum | 4,826.5 | ₹39,094.65 |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)including material , labour all leads , lifts and carriage of material by MT/HL. | 20.25 | cum | 5,733.6 | ₹1,16,105.4 |
| 5 | Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work | 90 | cum | 300 | ₹27,000 |
| 6 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge | 27 | cum | 1,885.95 | ₹50,920.65 |
| 7 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete incl. all leads, lifts & carriage of material by MT/ H.L. | 54 | sqm | 346.7 | ₹18,721.8 |
| 8 | Providing and laying in position specified grade of reinforced cement concrete inclu. curing but excluding the cost of centering, shuttering, finishing & reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L. | 0.84 | cum | 7,788.4 | ₹6,542.26 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levell Thermo-Mechanically Treated bars of grade Fe-500D or more | 75.75 | kg | 123.2 | ₹9,332.4 |
| 10 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 346.63 | kg | 181.6 | ₹62,948.01 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
BOQ_1087083.xls
BOQ • 0.26 MB
Corri61.pdf
PDF • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .