REPAIR TO FLOORING, SEEPAGE, LEAKAGE TO CERTAIN BLDGS AT 58 SU AF STATION CHIMNEY HILLS

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing coat) and including removing rubbish off the premises to a distance of not exceeding 50 m complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Demolition of cement concrete tiles, terracing tiles or brick tiles of any description, single layer on roof complete all as specified and as directed.

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed including removal to a distance not exceeding 50 m complete all as specified and as directed.

Removing excavated material, debris & demolished concrete of any description to a distance exceeding 500m but not exceeding 1000m and depositing where at a level not exceeding 1.50m above the starting pointdirected complete all as directed.

Material and labour for cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregates as in coping, bed plates, benchings, kerbs, water trought & the like including weathering, slightly rounded or chamfered angles & throating, etc., including use and waste of form work, finished the surface fair and even complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces mixed with water proofing liquid as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only item here in after

Supply only liquid water proofing compound all as specified and as directed.

Material and Labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area exceeding 0.11 Sqm but not exceeding 0.18 Sqm laid in floors etc., set, jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and Labour for glazed ceramic tiles of size 300 x 200 x 6 to 7mm thick on vertical surfaces as in dado/skirting over and including a backing coat of rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3 kg of cement per sqm complete to receive new floor tiles, etc, complete all as specified and as directed.

Material and Labour for cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregates) average thickness 50mm, as in padding, levelling course over roof slabs, finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on concrete surfaces of roof slab mixed with water proofing liquid as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only item here in after

Material and Labour for applying oil bound bituminuous primer @ 0.20 kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/sqm, reinforced with non polyester matt weighing not less than 160 gms/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650N/5cm and 350N/5cm in longitudinal and transverse directions respectively, reinforcement tearing strength of 180 N, laid over roof slab and bonded to the sub strata by heat process by flame torch application & including minimum 10 cm side over lap and 15 cm end over lap, sealed/fused by flame torch application as per manufacturer's instructions and finally applying solar reflective bituminous aluminium paint @ 0.1kg/Sqm over the membrane complete all as specified and directed.

Material and Labour for water proofing treatment to sunken floor by applying oil bound bituminuous primer @ 0.30 kg/Sqm and providing 3 mm thick APP modified water proofing membarane weighing not less than 3.50 Kg/sqm reinforced with non polyester matt weighing not less than 160 gms/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650N/5cm and 350N/5cm in longitudinal and transverse directions respectively, reinforcement tearing strength of 180 N, laid over sunken slab and bonded to the sub strata by heat process by flame torch application & including minimum 10 cm side over lap, sealed/fused by flame torch application as per manufacturer's instructions and complete all as specified and directed.

Supply and fixing in repairs vitreous china water closet Orissa pattern of size 580 x 450mm with P or S trap of size 110/110mm including provn of lime concrete bedding complete all as directed.

Supply and fixing in repairs vitreous china wash down water closet pedestal pattern white with 'P' or 'S' trap and plastic water closet seat cover including fixing bolts etc complete all as specified and as directed.

Supply and fixing in repairs vitreous china semi pedestal pattern (Anglo-Indian Type) white with 'P' or 'S' trap and plastic water closet seat cover including fixing bolts etc complete all as specified and as directed.

Supply and fixing in repairs plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as directed.

Supply and fix in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement to the existing pipe and including dismantling floor finishes, subbase of any size and type and making good the damaged portion with PCC 1:2:4, type B-0 and finishing the top surface to match with existing floor finishes complete all as specified and directed.

Taking up or down 20 mm bore mild steel galvanised tubing with all fittings and connections including cleaning for re-fixing or removal to store and refixing in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed.

Supply and fix 20 mm bore mild steel galvanised tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing and connections complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position for tank capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. for tank capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Supply and fix in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in floors complete all as specified and directed

Supply and fix in repairs 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed

Supply and fix in repairs PVC (SWR) bends, 110mm bore, any radius all as specified and directed.

Supply and fix in repairs PVC (SWR) 110mm bore, junction single (single T) Equal or unequal complete all as specified and directed.

Supply and fix stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall for 110mm dia pipe complete all as specified and directed

Material and Labour for preparation of new plastered surfaces of walls including cornices, pillasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

Material and Labour for preparation of old treated surfaces of walls/ceilings and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface including two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

ANAND REFRIGERATION

Aditya Associates