Carrying out the improvement works in AE/O and M/ East/Udumalpet section office and canteen-kitchen building at Central office premises, Udumalpet.

Improvement works

Dismantling the existing RCC sunshade/slabs including cost of all labour, lead,lift, etc., complete.

Dismantling the existing mangalore tiled roof without roof timbers including cost of all labour, lead,lift, etc., complete.

Dismantling the existing Framed timbers including cost of all labour, lead,lift, etc., complete.

Dismantling the existing wooden doors including cost of all labour, lead,lift, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay, Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Supply and filling of gravel inside basement including cost of all materials, labour charges, leads, lifts, etc., complete.

Providing PCC 1:3:6 mix using 40mm HBG metal including cost of all materials, lead, lift, labour charges, etc., complete.

Providing PCC 1:2:4 using 6mm chips including SBR-2 chemical, cost of all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Precast concrete solid blocks of 200 mm thickness in C.M 1:5 including, cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Chipping the existing damaged plastering on wall and ceiling areas wherever necessary and replastering the same with cement mortar 1:4, 12mm thick including SBR-2 chemical, cost of all materials, lead, lift, labour charges, etc., complete.

Plastering in CM 1:5, 12 mm thick including the cost of all material, cement, labour charges, all leads, lifts, as per standard specification.

Supplying cuddapah slab 20mm/30mm thick including cost of all materials, leads and lifts and fixing in position, including one coat of black paint in both side, etc., complete as per standard specification.

Supplying and laying of vitrified tiles of 1200x600x8mm approved quality and colour with ISI mark, laid in CM1:3, 20mm thick and pointing with colour cement using 0.40kg/m2 including finishing the joint, and pointing flush with tilesurface including cost of all materials, labour, lead lift as per specification etc complete

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing of Windows (4 Leaves) of approved size using 35x35x5mm MS angle for outer frame 25x25x3mm angle for shutter frame with shutter 18 gauge M.S.Sheet and 12mm dia bars as horizontal 11 Nos.with necessary locking arrangements including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour, cost of all materials, leads, lifts labour etc., complete.

Supplying and fixing in position of MS structural sections of various profile to support hand rails, etc., including cutting, hoisting, cost of all materials, labour, T&P, lead, lift etc., complete.

Supplying and fixing roofing using galvalume colour roof sheet like TATA Durashine roof sheet/Longline cripm/Tile or equivalent make supported on structural steel beam with necessary GI J/L bolt with nut, GI limpet washers, flashing at wall junction, including cost of all materials, labour, machinery for cutting to required size, lead, lift, edge trim covered with brick work etc., complete

Removing the existing Doors, providing fixtures, fittings, lock etc., and refixing in position including cost of labour charges for removing, repairing and refixing, cost of small tools, nails, lock etc.complete.

Removing and refixing of Aluminimum partition including cost of all materials, lead, lift, labour etc., complete.

Painting 2 coats of enamel paint of approved quality and make over wood works including cost of all materials, lead, lift, labour charges, etc., complete. (For old wood work)

Painting 2 coats of enamel paint of approved quality and make over wood works including cost of all materials, lead, lift, labour charges, etc., complete. (For old iron work)

Painting two coats with interior emulsion of approved quality overone coat of primer for inside wall surfaces including cost of all materials, labour, lead, lift, T&P, etc. complete.

White washing two coats using white cement [janatha cem and the like] approved quality and of reputed make for ceiling including cost of all materials, leads, lift, etc., complete

Painting with two coats of exterior emulsion paint over one coat of primer of approved quality for outer surfaces after through scraping and make including cost of all materials and labour, etc., complete

SGST to be quoted in percentage (value alone), Ex.9%, it should be entered as 9 only

CGST to be quoted in percentage (value alone), Ex.9%, it should be entered as 9 only

Inter-State GST @ 18% for other than Tamil Nadu supplier. If the contractor is within Tamilnadu may be quoted as "0" only