Transportation, installation, necessary fabrication, commissioning and trial run including extension of one no. 1000mm width, 1x90kW, 550V, single drive belt conveyor along 5D from 80L to 91L after dismantling of 79L. belt at R-VIIA seam, 3N4 Incline

Amount

ENM PART

Dismantling of the 1000mm width, 1x90kW, 550V, single Drive Head unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Couplings, Bearing Blocks, baseplate, fencing etc. of 79L belt conveyor from 79L/-10D (R-VIIA).

Dismantling of the complete discharge unit with strike plate & chute plate of 1000mm width 79L belt conveyor from 79L/-11D (R-VIIA).

Dismantling of the complete loop take up unit of 1000mm width 79L belt conveyor from 79L/[(-10D)-(-9D)] (R-VIIA).

Dismantling of the complete tail end unit with fencing of 1000mm width 79L belt conveyor from 79L/0D (R-VIIA).

Dismantling of 380mtr. 1000mm width 79L belt conveyor structure complete with stringer, foot stool, top Bracket, top roller, bottom roller, decking plate, scrapper etc from 79L/-11D to 79L/0D in R-VIIA seam.

Unlapping & pulling out of 790mtr. 1000mm width PVC belting of 79L belt conveyor from 79L/-11D to 79L/0D in R-VIIA seam.

Dismantling of pull cords with cable, communication devices with cable, signalling wire for a length of 380mtr.belt conveyor of 79L belt from 79L/-11D to 79L/0D in R-VIIA seam.

Transportation of the 1000mm width, 1X90kW, 550V Drive Head complete including gear box, motor(90kW/550V), base frame, couplings, bearing blocks, fencing etc from 79L belt dismantling site and installation at 81L/5D (R-VIIA) with necessary fabrication job.

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc from 79L belt dismantling site and installation at 80L/5D (R-VIIA) with necessary fabrication job.

Transportation of Loop Take Up Unit complete with motorized winch from 79L belt dismantling site and installation at (81L-82L)/5D (R-VIIA) with necessary fabrication job.

Transportation of Tail End Unit complete with fencing from 79L belt dismantling site and installation at 83L/5D (R-VIIA) with necessary fabrication job.

Transportation of 103.5mtr. 1000mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from 79L belt dismantling site to 5D belt installation site and installation from 80L/5D to 83L/5D in R-VIIA seam.

Loading, transportation and unloading of one breaker(550V/200A), starter(550V/90kW), LS unit from 79L belt dismantling site to 79L/5D (R-VIIA) with help of haulages; 60 mtr manually transport & placing them at 81L/5D(R-VIIA). (Distance- approx. 600mtr.)

Transportation of 150mtr 3.3kV grade 70 sq.mm. PVCDWA cable from surface to 79L/3D(R-VIIA) with help of haulages. (Distance- approx. 3000mtr.)

Laying-hanging of 150mtr 3.3kV grade 70 sq.mm. PVCDWA cable from 79L/4D(R-VIIA) ACB to 81L/5D(R-VIIA) manually.

Transportation of 230mtr. 1000mm width PVC belting from 79L belt dismantling site to 4D belt inst5llation site with help of haulages & 60mtr manually. (Distance- approx. 600mtr.)

Laying, lapping, jointing & tensioning of this 230mtr. 1000mm width PVC belting in proposed 5D belt.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from 79L belt dismantling site to 5D belt installation site with help of haulages for 103.5mtr. belt and laying-placing them from 80L/5D to 83L/5D in R-VIIA seam.

Testing, trial run, alignment & commissioning of this belt conveyor from 80L/5D to 83L/5D in R-VIIA seam.

Five times dismantling of tail end unit complete for five times belt extension of proposed 5D belt from 83L/5D (R-VIIA) to 87L/5D (R-VIIA).

Five times transportation and installation of tail end unit complete for five times belt extension of proposed 5D belt from 84L/5D (R-VIIA) to 88L/5D (R-VIIA).

Transportation of 1000mm belt structures (i.e. foot stools, channels, brackets, top and bottom rollers etc.) for a length of 172.5mtr. from 79L belt dismantling site to 5D belt extension site by haulages and installation them from 83L/5D to 88L/5D in R-VIIA seam during five times belt extension. *Each time belt extension will be for a length of 34.5 mtr.

Transportation of 350mtr. 1000mm PVC belting from 79L belt dismantling site through haulages & 60mtr. manually to 5D belt extension site.

Laying, Lapping, Jointing & Tensioning of this 350mtr. 1000mm belting from 83L/5D to 88L/5D in R-VIIA seam during five times belt extension and trial run.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) for 172.5 mtr. belt from 79L belt dismantling site to 5D belt extension site and laying & fitting them during five times belt extension.

Supply of DA cylinder

Supply of Oxygen cylinder

Supply of Five Ton Capacity Turn Buckle

CIVIL PART

Recess cutting in stone

Muck n Debris cleaning and disposal upto 15 Mtr.

Supplying and Filling in plinth with sand under floors including watering, Ramming, consolidating and dressing complete

Brick Work with Flyash Brick of class design 75 in foundation and plinth in CM: 1:4 (1Cement: 4 Coarse sand)

Providing and Laying in position cement concrete of specified grade excluding the cost of centreing and shuttering - all works upto plingth Level: 1Cement: 2 Coarse sand (Zone -III): Stone Aggregate 20MM nominal Size

12 mm Cement Plastering of mix -1Cement: 6 Fine sand

Loading of materials into Tub, Lowering and Unloading

Mining Part

Roof Heightning by drilling, Blasting in stone including dressing, cleaning with cost of drill rod and drill Bit(Excluding cost of explosive and detonator)

Roof Bolting including Carrying of materials from surface to underground site, drilling, Grouting, and cost of drill Rod and Drill Bit

Total impact of GST for the purpose of CTC

RINA ENTERPRISE

BABLU SINHA