WBPHED/EE/BMD/NIeT- 4 OF 2024-2025/12

Amount

PART-A

Supply, Delivery and storage at site of Horizantal Split cashing Centrifugal Pumping Machinary with base plate flexible coupllng, coupling guard, foundation bolt etc. other Accessories etc. having the following specification and as per technical Specifications given in NIT for CWR site N.B- H-Q curve has to be submitted during the delivery

a) Discharge : 58.5 m3 / hr, Total Head : 50 mtr.

Supply & delivery at site following Valves

CIDF non-rising Sluice Valve (P.N-1.0) generally conforming to IS 14846 for 1 no by pass arrangement and as per technical Specification given in NIT

i) DN 100 mm (P.N. 1.0) (for individual suction line )

ii) DN 100 mm (P.N. 1.0) (for individual delivery line )

Cast Iron Double Flange Swing Chek NR Valve as per API: 594 & Testing Std. API 598. Flanged drilled as per IS 1538.as per technical Specification given in NIT

i) DN 100 mm (P.N-1.0) (for 3 nos H/L individiual delivery header)

Supply, delivery & storage at site 100mm dia M,S Black Pipes

Supply, delivery at site 100 mm dia 16 mm thick Slip-On table F as per IS 6392

Supply, delivery & storage of Gleeserine type pressure gauge, cast Al. dial along with DN-15 GI impulse line with valve.

i) (0 – 12 Kg.) 102 mm dia for individiual delivery header

ii) (0 – 12 Kg.) 150 mm dia for Common Header

Supply, delivery & storage of Gleeserine type Compound gauge, cast Al. dial along with DN-15 GI impulse line with valve.

i) (+1 – 1 Kg.) 102 mm Ф for individiual Suction line

Supply, delivery and storage at site of following L.T cables

16 Sq. mm 3 core, 1.1 KV grade, Al. XLPEA cable conforming to IS : 7098 (Part – I). a) 3 nos motor x 50mtr =150mtr

Supply delivery and storage at site of Ultrasonic type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump as per technical Specifications given in NIT

Supply delivery of on the wall 1 x 22 watt single commercial type surface mounted LED Base tube light with complete set. Philips of Approved make

Supply delivery & fitting fixing of Indoor type LED light fixture Operating Voltage 140V-270 V AC 50Hz , with PDC housing & toughened glass suitable for ceiling (Surface/Suspended) mount & available in Wide beam (Rotational Symmetric) optics.EnduraLED Midbay Robust & reliable IP66 & IK08 protected LED midbay M.No-BY515P LED100S 5700 NB S1 PSU GR (Make Philips/equivalent model)

Supply & delivery at site horizontal type centrifugal self priming non-clog dewatering pump with horizontal type 415V ,50 Hz , 1 H.P three phase squirrel cage Induction motor including supply of channel base frame ,coupling and coupling guard complete set Discharge capacity : 5.7 M3/hr Total Head : 10 mtr. Suction/delivery- 40mm/40mm

Supply and delivery at site 40mm dia G.I pipe. With fittings i.e- Elbow, Union, Nipple. G.M Ball valve. C.I Foot valve etc for making suction and delivery line for dewatering pump.

PART-B ( Intallation)

Dismanteling and takenout of all damaged Pumping machineries from base, M.S /C.I suction and delivery pipe line Valves etc by the using manual labour and hiring tools (Vibrator, Cutting Machine and wilding machine) as per direction of E.I.C

Installation & commissioning of all items mentioned as in PART A including supply of all erection items, as required for installation of Pumpms motor set , all valves, delivery pipe line, crane, level indicator etc, laying of cable including supplying all necessary items i.e- nut & bolt wather rubber gasket, with painting, jointing of cables termination cable soketing by suitable rated sockets, jointing the delivery header with rising main, suporting piller and paining anticorrosive paint etc. including cost of gas cutting, welding etc. as required for complete the installation as per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specification and upto entire satisfaction of EIC.

Carrying charges for unserviceable matrials ie- Pump motor set, valves etc from water supply scheme to Bankura Mechanical Division Ahilakundi with loading and unloading as per direction

High Mast Light

8mtr Hexa dimensional sections pole suitable for 50m/sec wind speed with raising lowering system comprising ,head frame ,luminaries carriage suitable to install 6 nos luminaries in symmetrical arrangement, double drum winch , 6mm dia SS wire rope trailing cable ,connector , integral power tool motor, manual handle, junction box, aviatation obstruction light, lightening arrester and foundation bolts manufactured from special steel along with nuts, washer,anchor plate and feeder box necessary arrangement common template.

Flood lighting luminaire with single die ceramic base high power LED, PDC housing & integrated flood optics to ensure uniform distribution maintenance free system, ideal for sports lighting, area lighting and high mast lighting.- M.No-BVP192 LED165 CW NB FG A1 PSU GR SPD for Philips make or equivalent make

Surge protection device suitable for both 1+2 type protection 3 phase system 440V max operating voltage and max current 40KA along with sheet steel enclosure make- as per approved unified vendor list vide official website of WBPHED

32 Amps 415 Volt TPN re-wireable fuse type side handle operated and fixing Sheet steel Main Switch

10sqmm 4 core 1100V grade XLPE insulated aluminium Armored cable ,cable As Per IS-7098 (Part 1) 2011 with Up To Date Amendments,

Laying of above cable through the under ground trench having depth 760mmX width 460mm and laying 8 nos brick for per mtr length of the cable for protection of the cable including sand filling ramming complete as per IE rules as per direction of the EIC.

Construction of shallow foundation with M20 grade concrete for the high mast considering the safe soil bearing capacity at site as 10T/sq mt at 2 mtr depth with all materials and labour as per direction of EIC.

Erection and commissioning of the above pole with the help of suitable tools and plants wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor of 1.5 sq mm lugs, MCB and all labour as per direction of EIC

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 50mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1x4 SWG GI (hot dip ) wire (4 mts long) , 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl S & F 15 mm dia GI Pipe protection ( 1 mtr long ) to be filled with bitumin purely under the ground level and partly above ground level driven to the average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Add: 18% GST

Add: 1% Cess

EASTERN INDIA SALES AND SERVICE

M/S. Sajahan Chowdhury