Construction of community c...

Amount

FA- 10 Supply, Installation, Testing and commissioning of SITC of minimum 1000 mtr. Range (Kheraj make) SIREN generator provided at the roof of the building with separate power supply, relay etc .

FA- 11 Supply and erection of Duct type smoke detector with material required to complete the work upto the entire satisfaction of Engineer In Charge.

FA- 12 Supply, installation, testing and commissioning of 2 core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc. including the cost of all petty material required to complete the job upto entire specifications of Engineer- in – charge and with the 3 years freecomprehensive warranty period.

FA- 5 `Supply, Installation, Testing and commissioning of Addressable Loop powered sounder with strobe / flasher complete with mounting base as required conforming to BS5839 standards and duly approved .. Charge`

FA- 6 Supply, Installation, Testing and commissioning of Glow Type EXIT/Stair /Emergency Exit Sign Board as finalized by Engineer In Charge, photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastenerwith . material required to complete the work upto the entire satisfaction of Engineer In Charge.

FA- 7 Supply, Installation, Testing and commissioning of Analog Addressable type Active Repeater fire alarm panel with Backlit LCD Display, having controls for reset, mute, Accept, Silence alarms and self test conforming to BS5839 standards and duly approved by EN54/UN54/VDS . Charge.

FA- 8 Supply, Installation, Testing and commissioning of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/ voltage monitoring shall be compliant to EN54/UL/VDS. (In case of 2 monitoring features in one module (points) both point shall be consided as single unit for payment) . of Engineer In Charge.

FA- 9 Supply, Installation, Testing and commissioning of Addressable Control Relay Module with flexible network structures with a maximun switching current of 1A @ 30V DC, shall be having EN54/UL/VDS Certification with . material required to complete the work upto the entire satisfaction of Engineer In Charge.

FA-1 Supply, Installation, Testing and commissioning of Micro processor based 2 wire fault tolerant, networkable type fire alarm(b) Fire Alarm Panel 4 Loop at each floor

FA-2 Supply, Installation, Testing and commissioning of intelligent Analog Addressable type smoke detector that combine photo Electronic and fixed temp thermal with inbuilt isolator or isolator base complete with LED Hard

FA-3 Supply, Installation, Testing and commissioning of intelligent Analog Addressable type Laser based smoke detector suitable for early detection of fire in IT room/computer room etc with inbuilt isolator or isolator base complete with LED Hard Addressable having rotary decade Address switches with Mounting Base Complete as required conforming to BS 5839 standards and duly approved

FA-4 Supply, Installation, Testing and commissioning of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliant to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duly approved Charge

FF- 1 (B) Supply, Installation. Testing and Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 Year free comprehensive warranty period, upto the entire satisfaction of Engineer In Charge.(Under ground) Make : JINDAL/TATA b)100 mm dia

FF- 1 (C) 80 mm dia Supply, Installation. Testing and Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 Year free comprehensive warranty period, upto the entire satisfaction of Engineer In Charge.(Under ground) Make : JINDAL/TATA

FF- 3 (A) 80 mm dia Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make : Kartar

FF- 3 (B) 100 mm dia Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make : Kartar

FF- 3 (C) 150 mm dia Supply. Installation. Testing and Commissioning of P.N.1.6 Butterfly Valve, as per IS:13095.complete with flanges, gasket, nut bolts for isolation with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make : Kartar

FF-1 (A) Supply, Installation. Testing and Commissioning of c-class M.S. pipes conforming to IS:1239, including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges, welded joints etc. as required, making good complete with wrapping and coating, including the cost of digging of trench and back filling the same and cost of the petty material required to complete the work with 3 Year free comprehensive warranty period, upto the entire satisfaction of Engineer In Charge.(Under ground) Make : JINDAL/TATA a) 150 mm dia

FF-10 `Supply, Installation. Testing and Commissioning of 150 mm dia Dual Plate Non Return Valve 150 mm dia, as per IS-14846,comp!ete with flanges, gasket, nut bolts . MAKE : KARTAR`

FF-11 `Supply, installation, testing and commissioning of Manual Swing Type First aid Fire Hose Reel conforming to IS: 444 complete with heavy duty reel, 19mm dia.x 30Mtr. long, 2-ply polyester yarn braided /rubber braided pressure hose with heavy duty nylon on/off jet/spray nozzle, 25mm isolating valve .Make: ULTRA FIRE `

FF-12 `Supply. Installation. Testing and Commissioning of Pressure Gauge with gauge cock . of Engineer In Charge. Make: FIEBIG/H.GURU`

FF-13 `Supply. Installation, Testing and Commissioning of Air cushion Tank (200mm dia x 1000mm height) fabricated from MS Sheet with dish ends, including fittings/accessories, with 2 coats of Primer and P.O.Red Enamel Paint (Locally Fabricated) with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FF-14 `Supply, Installation, Testing and Commissioning of 25 mm dia Air Relese Valve with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make :KARTAR `

FF-15 `Supply. Installation. Testing and Commissioning of Electric driven Terrace pump capacity 900 lpm.10 HP @ 30 MWC Head complete with base plate, coupling guard, foundation bolts . Make:KIRLOSKAR/CG/ABB`

FF-16 `Supply. Installation, Testing and Commissioning of 25 mm dia Gate Valve 25 mm dia with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make :KARTAR `

FF-17 `Supply and Fixing of Carbon Standard Fire Man Axe with material required to complete the work upto the entire satisfaction of Engineer In Charge. .`

FF-18 `Supply and fixing of 6kg ABC type fire extinguisher as per IS:15683(6 kg.) . of Engineer In Charge. Make: ULTRA FIRE `

FF-19 `Supply and fixing of 4.5kg C02 gas type fire extinguishe as per IS: 15683(4.5 kg.) . of Engineer In Charge. Make : ULTRA FIRE `

FF-2 (a)150 mm dia Supply. Installation. Testing and Commissioning of c-class M.S. pipes conforming to IS:1239, Including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges welded or screwed joints etc. as required, making good complete . of Engineer In Charge.(Above ground) Make : JINDAL/TATA

FF-2 (B) 80 mm dia Supply. Installation. Testing and Commissioning of c-class M.S. pipes conforming to IS:1239, Including all fittings like anchor fasteners, brick masonry supports, couplings, bends, elbows, tees and flanges welded or screwed joints etc. as required, making good complete . of Engineer In Charge.(Above ground) Make : JINDAL/TATA

FF-20 `Providing and Fixing of MS angle iron frame duly painted, of standard height suitable to hold 3 buckets at a time and Gl Filled sand Buckets painted RED complete . Engineer-in – charge.`

FF-21 `Providing Elelctric Shock Treatment Chart of standard size duly framed and covered with 5 mm thick glass etc. complete In all respects including the cost of all petty material required to complete the job upto entire specifications of Engineer-in – charge.`

FF-22 (B) Pump House and Sprinkler System `Providing and laying antishock rubberised mat of 12mm thickness for Pump House chamber complete in all respect comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Engineer-in – charge.`

FF-23 `Supply, Installation. Testing and Commissioning of Horizontally Centrifugal Single Stage Electric driven fire pumping set having capacity 2280 Lpm @ 70 MWC Head complete with base plate, coupling guard, foundation bolts., with TEFC Motor suitable for 415V ±10%, 3 Phase 50 Hz AC supply of suitable HP for above Pump running at 2900 RPM with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make: Kirloskar/wilo`

FF-24 `Supply, Installation, Testing and Commissioning of Jockey pump having capacity 180 lpm @ 70 MWC Head with 15 HP TEFC Motor complete with base plate, coupling guard, foundation bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make :Kirloskar/CG/MATHER and PLATT comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FF-27 `Supply, Installation. Testing and Commissioning of Pressure Switch, inclduing wiring and connenction with Motor Control Panel for Automation of Panel . Charge. Make:lndfoss/Danfoss`

FF-28 `Supply, Installation, Testing and Commissioning of Pressure Gauge 100/80 mm dia with calibration of 0-14 Kg /Sq.Cm. . Charge. Make : FIEBIG/H.GURU`

FF-29 `Providing and fixing MS Class „C? diesel engine exhaust pipe (including all fittings, clamps, steel support etc.) of 100mm dia for the engine. The pipe shall be insulated with 100 mm thick mineral wool insulation wrapped in chicken mesh and clad with 24 gauge aluminium sheet and with the 3 years free comprehensive warranty period.`

FF-30 a) 200 mm dla `Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA`

FF-30 B) 150 mm dla ` Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA`

FF-30 C) 100 mm dla ` Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA

FF-30 D) 80 mm dla ` Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA

FF-30 E) 25 mm dla ` Supply. Installation. Testing and Commissioning of c-class MS Pipe confirming to IS 1239 with primer,painting, fitting and necessary support with . material required to complete the work upto the entire satisfaction of Engineer In Charge.( Above ground) Make :JINDAL/TATA

FF-31 a) 200 mm dia (Gear operated) `Supply. Installation. Testing and Commissioning of PN 1.6 Butterfly Valve as per IS: 13095. complete with flanges, gasket, nut bolts etc. . Of Engineer In Charge. Make: KARTAR`

FF-31 B) 150 mm dia (Gear operated) `Supply. Installation. Testing and Commissioning of PN 1.6 Butterfly Valve as per IS: 13095. complete with flanges, gasket, nut bolts etc. . Of Engineer In Charge. Make: KARTAR`

FF-32 `Supply. Installation. Testing and Commissioning of 200 mm dia Y type strainer complete with flanges, gasket, nut bolts etc. . Make : KARTAR`

FF-33 a)150mm dla `Supply. Installation. Testing and Commissioning of Dual Plate Non Return Valve as per IS:5312, complete with flanges, gasket and nut bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make :Kartar`

FF-33 B)80 mm dla `Supply. Installation. Testing and Commissioning of Dual Plate Non Return Valve as per IS:5312, complete with flanges, gasket and nut bolts. with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make :Kartar`

FF-34 a)l50 mm dia `Supply. Installation. Testing and Commissioning of Anti Vibration expansion bellow complete with flanges, gasket and nut bolts. . Of Engineer In Charge. Make : Kanwal`

FF-34 B) 80 mm dia `Supply. Installation. Testing and Commissioning of Anti Vibration expansion bellow complete with flanges, gasket and nut bolts. . Of Engineer In Charge. Make : Kanwal`

FF-35 `Supply. Laying, Testing and Commissioning of Cabling for pump complete with base saddle, lugs, ferrule laid in ground/wall as required . Of Engineer In Charge.Make : Havells/RR/Finolex (a) 2 x 1.5 Sqmm Copper Armoured Cable`

FF-36 `Providing and fixing type air versel of 300mm dia 1.5m height fabricated for out of 10mm thick MS plate suitable for 7 kg/cm2 working pressure complete with 25mm air release valve, safety valve, pressure gauge etc. as required. The air vesel shall be continous welded construction and painted with two coats of postal red enamel outside over a coat of primer and epoxy paint inside. complete in all respect upto entire satisfaction of the Engineer-in- CHARGE`

FF-37 `Supply, Installation. Testing and Commissioning of 25 mm dia Air Release Valve 25 mm dia with required fittings . of Engineer In Charge.Make : KARTAR/SANT/ZOLOTO/LIFE GUARD`

FF-38 `Supply. Installation. Testing and Commissioning of Draw Out Connection 100 mm dia. of Engineer In Charge. Make: Newage/MINIMAX/FYRMAX/SAFGUARD.`

FF-39 `Supply. Installation. Testing and Commissioning of 100 mm dia Foot Valve 100 mm dia. . of Engineer In Charge. Make : KIRLOSKAR/KARTAR`

FF-4 Supply. Installation. Testing and Commissioning of 150mm dia Sluice Valve as per IS-14846. complete with flanges, gasket, nut bolts . of Engineer In Charge. Make : KARTAR

FF-40 a) 150 mm dia `Supply. Installation. Testing and Commissioning of c-class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA `

FF-40 b) 100 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA `

FF-40 c) 80 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA `

FF-40 d) 65 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA `

FF-40 e) 50 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA `

FF-40 f) 40 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA `

FF-40 g) 32 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA

FF-40 h) 25 mm dia `Supply. Installation. Testing and Commissioning of c- class M.S. Pipe as per IS:1239 including cutting, jointing and welding etc., and providing suitable flanges alongwith necessary fittings like Bends. Tees. Reducers etc. and coating of Primer and P.O. Red Paint. . Of Engineer In Charge.(Above Ground) Make: JINDAL/TATA

FF-41 `Supply. Installation. Testing and Commissioning of of Pendant type Sprinkler 68 deg. with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make : AQUA/HD/TYCO`

FF-42 `Supply. Installation, Testing and Commissioning of of Upwright type Sprinkler. with . material required to complete the work upto the entire Make : TYCO`

FF-43 `Providing, fixing, testing and commissioning of U.L.listed corrugated SS-304 Braided flexible sprinkler pipe droplet for 12 kg/ sq. cm. working pressure with 1/2`` BSP threaded outlet and 1`` BSP threaded inlet with reducer nipple, snap, clamp, T-bar bracket etc. with necessary fitting complete as required. 1500 mm Length Make: Tyco `

FF-44 `Supply. Installation, testing and Commissioning of Normal type Rosette Plate for sprinkler with . material required to complete the work upto the entire satisfaction of Engineer In Charge.`

FF-45 `Supply, installation. Testing and commissioning of 150 mm dia Butterfly Valve with flange, gaskets nut bolts Complelte in all respects with . material required to complete the work upto the entire satisfaction of Engineer In Charge.Make : SIR/Kalpna/Kartar`

FF-46 `Supply. Installation. Testing and commissioning of 150 mm dia Flow Switch complete in all respect. . Make:- System Sensor`

FF-47 `Supply. Installation. Testing and Commissioning of 150 mm dia Installation Control Valve Assembly complete in all respects .Make : HD/Equivalent`

FF-48 `Supply and Installation of 50 mm dia Ball Valve 50 mm dia . Make : Kartar`

FF-5 Supply, installation, testing and commissioning of Fire Hydrant Valve (Landing Valve), bearing to IS:5290 mark. S.S., 63mm. oblique instantaneous single outlet, 75mm. N.B. flangod inlet, spindle, complete with PVC blank cap., G.l. chain etc. . Charge. Make : ULTRA FIRE

FF-6 Supply, installation, testing and commissioning of Branch Pipe, S.S.. short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 16mm bore nozzle, as per IS.318 LTB2/1S-903 with Make : ULTRA FIRE

FF-7 Supply, installation, testing and commissioning of Fire Hose, RRL hose jacketed with circular woven synthetic fibre, conforming to IS: 638:88. 63mm.dia.x 15Mtr long with SS heavy duty. 63mm. 2 pair of male and female instantaneous couplings, having IS: 903 mark with duly S.S. wire wounded The hose shall be rolled and hug to suitable M. S. support in the Fire Station, with . material required to complete the work upto the entire satisfaction of Engineer In Charge. Make : ULTRA FIRE

FF-8 Supply, Installation. Testing and Commissioning of weather proof standard FireHose Cabinet box, with 5mm thick Single Glass Door, 18 SWG SS 304 sheet fabricated, including Lock and Key with PO Red Paint, rubber bidding, complete in all respect for external, Size 900x750x250. . Charge. Make : ULTRA FIRE

FF-9 Supply, Installation, Testing and Commissioning of 4 way Fire brigade inlet with 63 mm dia instantaneous inlet as per IS:904 complete with all necessary fittings, of petty material required to complete the work upto the entire satisfaction of Engineer In charge Make : ULTRA FIRE

Supply, Installation, Testing and commissioning of Micro processor based 2 wire fault tolerant, networkable type fire alarm (A) Main Fire Alarm Control Panel 6 LOOP (To Be placed on G.F. Floor)

Bidder Name

Amount

SANDEEP KUMAR CONTRACTOR(GSTN-06CFGPS4963H1ZI)

Mukesh Kumar Contractor(GSTN-06AKUPB1426B1ZN)

RAVI PARKASH CONTRACTOR(GSTN-06AJMPP2964K1ZN)

SANDEEP KUMAR CONTRACTOR

Mukesh Kumar Contractor

SANDEEP KUMAR CONTRACTOR

Mukesh Kumar Contractor