S R Maintenance and Additional Alteration of Primary Health Centre at Sanjauli in Ward No 18 Engine Ghar

Amount

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres leadun-reinforced cement concrete more than 15cm. Thickness

Demolition of stone masonry below G.L. upto 1.5 metres depth including stacking of serviceable materials and disposal of un-servicable materials within 20 metres leadRubble masonry in cement mortar

Steel work welded in built up sections,trusses and framed work,including cutting,hosting,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars,ladders,railling,brackets and similar works.

Providing and fixing polycarbonatd tranparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh puttySide hung windows

Providing and fixing M.S welded mesh 25 mm x 25 mm x 2 mm thick as per approved design complete

Providing flushing 38cm. overall in plain G.I. sheet fixed with galvanised iron. J or L hooks, bolts and nuts, G.I. limpet washer and bitumen washers complete bent to shape and fixed in walls with cement mortar 1:3 (1 cement : 3 sand) 0.63mm thick sheet.

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm thick sheet

Providing and fixing PGI Sheet 0.63mm thick in expansion joint with overall width 45 cm fixed to beam /slab with wooden plugs and screws i/c bending to slope and fixed in bitumen mix filler in proporation of 80 kg bitumen 1 kg of cement & 0.25 cum of sand hot mixed complete

P/L PVC Pipe 100mm dia for approved Quality

P/F PVC plain bend ISI marked

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40mm thick 2nd class deodar wood.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plan grill

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.2nd class deodar wood.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick

Precast Chequred tiles 20mm thick of chequred tiles specified sizes laid in floors, treads of steps and landings on a bed of 25mm average thickness of cement mortar 1:6 (1cement :6 sand) jointed with neat cement slury mixed with frignest to match the shade of tiles including rubbing and polishing complete with tiles of following shades. (i) 50% Grey and 50% Colour

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand).

Providing wood work in frames of false celling partitions etc. sawn and put-up in position. 2nd class deodar wood

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete)

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete)

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)

P/F magantic catecher heavy duty for cup board etc

P/F M.S Handles 125mm

P/F Pine wood for celing & Panneling etc. for approved Quality

Providing and fixing Cera make viterous china basion with single hole for pillar tap with C.I or M.S brackets pained white including cutting holes and making good the same but excluding fittings:- a) Flat back :- i) 550mmx400mm

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm.

Half Brick work in Super-structure span not exceeding 6 metres, using common burnt clay building bricks in cement mortar 1:4 including centring and shuttering complete in CM 1:4

P/F Aquca gared for approved quality

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete

P/F ornamental looking mirror of size 600mmx450xxmm

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.

Providing and fixing 2mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)

Providing and fixing veneered decorative plywood lining with decorative surface on one face with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) 4 mm thick ply

P/F PVC Coloured Sheet for ceiling for approved quality

AEKANSH

GAURAV KASHYAP

vivek mehan