CONSTRUCTION OF APPROCH ROAD,BOUNDARY WALL, VEHICLE SHED, CAMPUS DEVELOPMENT & R.T.P.S COUNTER IN THE CAMPUS OF NEWLY CONSTRUCTED COMBINED BUILDING NAUGACHHIA , BHAGALPUR FOR THE YEAR 2025-26.

Supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of/and manure before and after flooding trench with water (encluding cost of imported earth,sludge or manure).

Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment).

Supplying and stacking Sludge at site including royalty and carriage (Sludge measusred in stacks will be reduced by 8% for payment).

Supplying and stacking a' site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment)

Uprooting weeds form the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately).

Mixing earth and sjudge or manure in porportion specified or directed.

Fine dressing the ground

Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed.)

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying 1:2:4(1Cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size)in position cement concrete of specified grade exluding the cost of centering and shuttering -all work up to plinth level etc. all complete as per building specification and direction of E/I.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grdereinforcd cement concreteetc.all Complete as per building specification and direction of E/I

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grdereinforcd cement concreteetc.all Complete as per building specification and direction of E/I

Brick work with fly ash bricksCement mortar 1:6 (1 cement: 6 coarse sand ) as per IS 12894(2002) & IS 3495 in foundations and plinth etc.all Complete as per building specification and direction of E/I

Centring and shuttering including strutting,propping etc. and removal of form for.

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

12 MM Cement plaster in course sand1:6(1 cement: 6 coarse sand) etc. complete as per building specification and direction of E/I.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shadeNew steel work (two or more coats) etc. all Complete as per building specification and direction of E/I.

Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth )

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 60 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In- Charge. {Cost of truss/frame work shall be paid separately).

Providing and laying in position 1:1.5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level etc all complete as per building specification and direction of E/I.

Brick work with fly ash bricksCement mortar 1.:4 (1 cement: 4 coarse sand ) as per IS 12894(2002) & IS 3495 in foundations and plinth etc.all Complete as per building specification and direction of E/I

12 mm cement plaster 1:4( 1 cement: 4 coarse sand) finished with a floating coat of near cement etc. complete as per building specification and direction of E/I.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.

Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) etc, complete as per building specification and direction of E/I.

Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm

Brick work with fly ash bricksCement mortar 1.:4 (1 cement: 4 coarse sand ) as per IS 12894(2002) & IS 3495 inm Super Structure etc.all Complete as per building specification and direction of E/I

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20

Carriage of Materials

per 1000 nos

extra costs of materials

per 1000 nos