Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹41.6 L+₹2.6 L (6.67%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹43.2 L+₹4.2 L (10.8%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹45.5 L+₹6.5 L (16.5%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹46.9 L+₹7.9 L (20.3%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹95,740
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
ADDN ALTERATION OF CHANGING ROOMS AT COMMAND SWIMMING POOL AND PROVISION OF COVERED SHED ON FIRST FLOOR TERRACE OF BUILDING NO P37 AT OLD NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI
2023_MES_613464_1
8291/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar, Colaba
Class D and Category a(i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹95,740
Yes
29 Sept 2023
12 Aug 2023
11 Sept 2023
12 Aug 2023
9 Sept 2023
26 Aug 2023
12 Aug 2023 - 2 Sept 2023
Amount
Taking down and removing the existing plaster, tile and adhesive by chipping and grinding the surface washing complete and removal of debris to outside of MD land complete all as directed.
M&L Rakingout Joints & cracks by grinder ( 5mm deep grove) and seal with cementitious material all as per manufacturer instructions complete all as directed.
M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge complete all as specified.
All as above but 10mm thick in CM (1:3) in ceilling complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M & L High quality Granite(of any type) Slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:3 including cutting and polishing types complete all as specified. ( Colour approved by GE )
M & L 20mm thick Granite(of any type) tiles machine cut in skirting/dado windows cill,sides lintel laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:3 including cutting and polishing of type complete all as specified.( Colour approved by GE )
S & F Non Skid ceramic coloured tiles 08 to 10 mm thick (square/ rectangular) size .36 Sqm but not exc 0.54 Sqm of each tile in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM(1:4) complete all as specified.
S&F Glazed colour ceramic tiles in vertical surfaces 0.12 Sqm but not exc .36 Sqm to 08 to 10 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick back plaster in CM(1:3)complete all as specified.
Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations all complete as directed by Engr-in-Charge complete all as specified.
S&F SS drapery rod Grade-304 of requied dia and length as specified and directed by Enger in charge
S&F SS drapery rod holders of approved design Grade-304 complete all as directed.
M&L applying Internal Texturel painting work (a) Providing & applying External Texture Bubble Spray of Asian paints or equivalent as approved by GE on plastered surfaces (b,) Providing and applying Internal/ one coat primer and , 2 Coat Apex alltima Protect all as specified and directed by Engineer-in-Charge
M&L Providing & Appliying 2 mm thick putty and one coat primer and two coats of Royal paint of Asian paints or equivalent as approved by GE on wall and ceilling all as specified and directed.
Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified.
Taking down chowkats with shutter (without taking shutter from the frame) exc 1.5 sqm each but not exc 4 Sqm each all complete all as specified.
S&F aluminium grill with suitable aluminium powder coated frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aperture 50mm) all complete.
S&F PVC Decorative grills/ Lovers of approved colours design all as specifed and directed
S&F S/S wire cloth mesh 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples all complete.
S&F 8 mm thick frosted glass of approved pattern and design and glazing with aluminium and neoprene beads in square exc 0.5 sqm in each pane all complete and s/s lock, clips for fixing and frameless enclosures add to the aesthetic appeal of the bathroom as more glass and less hardware gives spacious look to the bathroom, the functionality and affectiveness with the usage of minimum fittings and fixtures with standard and customised option complete all as directed.
S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,property of being termite/borer proof,water/ moisture proof and fire retardan
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F anodiesd alumunium frame/track or shutters for windows, ventilators etc with one or more rebates incl joining cleat for fixing etc. fixed or sliding type/louvered window or ventilator without sash bar,aluminium including necessary joining cleats glazing clips rubber packing,anodised aluminium snap beadding screws locking arrangements etc. including necessary working platform (scaffoldings) and safety measures Complete all as specified and as directed by Engr-in-Charge (work will be carried out upto 06 storey ht of bldg).
S&F toughen glass 12 mm thick frosted of approved design/ pattern as in door shutters and partition inlcuding necessary SS hinges, handles and locking system complete all as directed including taking down old u/s glass frameless enclosures add to the aesthetic appeal of the bathroom as more glas and less hardware gives spacious look to the bathroom, the functionality and affectiveness with the usage of minimum fittings and fixtures with standard and customised option complete all as directed.
S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed, rebated on the solied, rounded or chamfered, put together with glue pinned at joints.
S & F 35 mm thick Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with lipping/frame to match.
M&L applying two coats of synthetic enamel paint over primer including preparation of new wooden surfaces over 10cm width/girth all as specified.
S&F 125mm size brass butt hinges.
S&F 150 mm long brass tower bolts of extruded section.
S&F 150mm size brass handles
S&F 300mm x 12mm dia brass aldrop
Demolition of lime Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc complete all as specified.
M&L cement concrete 1:3:6 with with 40mm graded stone coarse aggregate in floor all as specified and directed.
M & L in repairs Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) 100 mm dia complete all as specified.
Taking down Cast iron soil waste pipe (any size and patterns) mouldings all fittings heads, shoes, bends complete all as specified.
S & F cast iron sand cast pipes in any length with or without cement mortar laid on walls of 100 mm dia complete all as specified.
S & F cast iron sand cast pipes in any length with or without cement mortar laid on walls of 75 mm dia complete all as specified.
S & F CI Bends or TEE (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 100 mm dia complete all as specified.
S & F CI Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm dia complete all as specified.
S & F CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 100 mm complete all as specified.
S & F CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors of bore 100 mm complete all as specified.
S & F in repairs wall mounted western type shape elongated size 350 x 750 x 340 mm weight 25 kg comode with concealed flush tank push button fittings installed 1 soft close slim seat cover 1 gasket with screw vitreous china wash down water closet pan (Squatt pattern), white including fixing bolts, flushing cistern and flush pipe) connection to trap/drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete including making good to floor. Make : Jaquar, model No - DIS-WHT-93951 UF or Equivalent)
S & F Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) all as completed and specified
S&F cast brass CP health faucet with 900 mm long CP throat type connection pipe complete all as spfd & directed fixed in repairs.Make jaquar or equivalent)
S & F counter top wash hand basinwith plug, washers waste pipe, with CP bottal trap cast iron cantilever brackets, connecting union overall size 635 x 415 x 190 mm complete counter part and Granite finishing complete all as specified. Make : Jaquar, model No - ARS-WHT-39601 or Equivalent
S&F brass chromium plated angle type pillar cock swan neck fixed at counter top complete all as directed and as specified. (Make /Jaquar or Equivalent quality/ model)
S & F in repairs PVC Connectors 15 mm size with PTMT nuts of length 600 mm complete all as specified.
S & F in repairs PVC Corrugated pipe of 32 mm dia 0.8 m length complete all as specified.
Supply & Fix in repairs Vitreous China Full stall urinal of size 340 x 325 x 650 mm with suitable SS bottle trap and urinal speader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back. Make : Jaquar, Model No - URS-WHT-13263 or Equivalent.
S&F 15 mm brass chromium plated 2-in one Bib Cock long shank with flange (Make : Jaquar or Equivalent quality/ model)
S&F 15 mm brass chromium plated angular stop cock (concealed) with flange (Make : Jaquar or Equivalent quality/ model
S&F brass chromium plated shower of 300 mm dia complete all as directed. (Make : Jaquar, model No -276016 or Equivalent)
Demolition of brickwork built in cement mortar including removal of unservicable bricks from MD land complete all as specified.
M & L Brickwork with sub -class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified.
S & F grating doom 100mm dia of SS complete all as specified.
Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.
M & L in repairs for anodised aluminium snap grid frame work for false ceiling with and including 4 mm thick Non asbestoes cement building boards (size of grid 605mmx605mm) including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete .
Supplying and fixing glass mosaic tile of approved colour and approved design on white tile adhesive and filling the joints with white polymer tile grout including 10mm thick screed bed in CM 1:4
Supply & fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge
S&F Solar control film 50 micron reflective type (gareware sun control or equiva?lent) including taking down old U/S film complete all as directed.
Material & Labour for udaipur green/baroda green marble slab 18-20 mm thick over cooking platform and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete all as specified and directed by Engg-In- Charge.
S & F 2nd class softwood tick wood clean sawn boards or planks, width n exc. 25 cm and thicness 40 mm of board all as specified and directed.
S&F Timber, clean sawn in scantlings, boardings, etc., suitable for strutting, shoring, centering, formwork and for other temporary purposes all as specified and directed.
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, hallow pipes etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) FE 410 w grade E-250 and hanging; also fastening and fixing complete
Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc.
M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC concealed conduiting including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.
One light/Exhaust/Ceiling fan point controlled by one switch.
One 3 pin switch socket combination 5 Amps on the same board with other switches.
One 3 pin switch socket combination 5 Amps, independent.
All as per item No. 70.00 here in before but with 2.5 Sqmm copper conductor with 2.5 Sqmm cable for earth conductor for one 3 pin 15 Amps socket outlet controlled by one switch. Separate circuit shall be drawn from MCB. No taping from light circuit.
S & F in replacement with new modular switch, 1 module, single pole one way 6Amp.
S & F in replacement with new modular switch, 1 module, single pole one way 16Amp.
S & F in replacement with new modular socket 2/5 pin, 2 module, 6A, ISI marked, 230 volts.
S & F in replacement with new Socket 6/16A, 6 pin, 2 module, ISI marked, 240 Volts, all as specified.
S & F in replacement with new modular stepped type fan regulator, 2 module, single pole one way. 230 volts ISI marked and connecting up complete.
S & F ceiling rose surface bakelite 65x50 mm with 3 terminals.
Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F modular metal flush box 8 module for mounting of modular switches and blank plate.
All as per Item No- 78.00 above but of modular metal flush box, 6 module.
All as per Item No- 78.00 above but of modular metal flush box, 4 module.
All as per Item No- 78.00 above but of modular metal flush box, 3 module.
S&F modular white cover plate with frame, 8 module.
S&F modular white cover plate with frame, 6 module.
S&F modular white cover plate with frame, 4 module.
S&F modular white cover plate with frame, 3 module.
supply and fix surface mounting LED 36 watt 2x2 luminaire of enhance the delight of occupants with each confortable experience through is classic design & glare free soft illumination. White powder coated CRCA housing, seamless front frame with flat white high transmission acrylic cover including making alll electrical connection complete all as specified and directed by Engr-in-Charge.
S&F in relplacement with Slim LED intigrated batten of 10 Watt 2ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings complete.
S&F in relplacement with MCB DB SPN confirming to IP 43-IK 09 with acrylic door, 8 way complete with din rail, Neutral and Earthing bar complete and making good the disturbed surfaces.
S&F in relplacement with MCB SPN, 10 to 25Amp, 10KA, 230Volt.
S&F in relplacement with MCB, single pole, upto 20Amp, 10KA, 230Volt.
S&F in relplacement with submain wiring in PVC conduit using 2 Core 6 sqmm PVC insulated stranded copper conductor, single core, FRLS incl single run of 6 sqmm stranded conductor as earth wire all as specified and as directed by Engr- in-Charge.
S & F ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified.
S&F Exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including connection as required at site with three core flexible copper cable all as per specified and directed.
S&F Wall fan, made of sturdy Engineering plastic, voltage 230V, 50 Hz, RPM 1350 Copper winding of sweep 400 mm including connection as required at site.
S&F DB TPN confirming to IP 43-IK 09 with acrylic double door, 06 way complete with din rail, Neutral and Earthing bar complete and making good the disturbed surfaces.
S&F MCB SPN, 32 Amp, 10KA, 230Volt.
MCCB 63 Amps, 4 Pole, 16 kA, thermal magnetic release, Ics=100% Icu
M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, 240 volts complete all as specified and directed.
Supply, install, testing and commissioning of meter cabin panel mounted on angle iron frame 40x40x5 mm grouted on floor,cubical indoor type for 415V, 3 phase, 4 wire made out of 2 mm thick CRCA sheet weather, vermin proof factory fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 200 Amps rated copper bus bar(All in equal size), top and bottom cable entry with proper size glands including disconnecting cable connections and electronic meters from old meter cabin panel and fixing & connecting in new installed panel with provisions of thimble/lugs and making provisions of vision glasses for meter readings, one spare MCCB compartment, and including PCC on 1:2:4 type B-1 for fixing meter cabin at old meter cabin place complete all including taking down as specified and as directed comprising of the following (a) MCCB 100A, 4 pole, 415 volt, thermal magnatic release type, Ics=100% Icu, 25 kA - 01 Nos, Cat No-4200 55 of Make-Legrand/Siemens/L&T/Schneider. (b) MCCB 63A, 4 pole, 415 volt, thermal magnatic release type, Ics=100% Icu, 25 kA-01 Nos, Cat No-4200 53 of Make-Legrand/Siemens/L&T/Schneider. (c) MCB SPN 32 Amps- 10 Nos Make-Legrand Cat No-4086 17 or eqivalent to L&T/Schnider/ABB. (d) Supply & fix of 300VA to 12V IP68 transformer. (e) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V, A, F, PF, KW, kVAR, kWH etc of make :- L&T, Cat Ref -WL441010OOOO-01 set or equivalent in Legrand/Schnieder/ABB. (f) Phase indicator lamp R,Y & B - (01 Set of three). (g) Copper Bus bar, 200 Amps Rated - R,Y,B & N - (01Set of four). (h) Reconnecting of submain cable 2 core 4/ 6 Sqmm copper conductor with outgoing of energy meter. (j) Making good the disturbed surface of meter cabin room if any damages occures during shifting of panel. Note :- Before fabrication of panel the contractor has to take approval from accepting officer on drawing.
Supply & Fixing in replacement of PVC water storage Tank of capacity 5000 Ltrs with cover triple layer pure anti microbail round type and dismantling of existing foundation and making new PCC foundation size 10 cm more than the dia of the tank and height of the foundation not less than 20 cm height and making connections including replacement of new GI fittings i.e. tank nipple, washers, float valves and Gate valves and Pipes for connecting the existing delivery lines complete all as specified and directed for the following capacity :- Note :- Gate valves and GI pipe only shall be paid under relevant item of Schedule 'A' remaining items shall be deemed to be included in the item rate.
Supply/Fixing in repair/replacement of steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall including necessary short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge.
50 mm bore
40 mm bore
25 mm bore
15 mm bore
Supply and fix in replacement of Gun-metal, globe or gate valves 50 mm , with iron wheel head, screwed both ends for iron pipe.
All as per item no 103 here in but size of gate valve 40 mm dia .
All as per item no 103 here in but size of gate valve 25 mm dia .
Supply and fix in replacement of Stop valves 15 mm bore, fancy type, chromium plated (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
Supply and fix in replacement of Fancy type Bib taps 15 mm bore surface fixing, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in replacement of shower rose CP 125mm dia swivel type suitable for 15mm bore GI tubing
S&F in replacement of shower arms 15 mm dia size, 195 mm long with bend of 45 degere with flange of PTMT any colour complete all as specified and directed
Supply and fixing in repair of water pressure pump of capacity 0.5 HP, single phase including making connection and fixed on stand post complete all as specified and directed.
Disconnecting and Shifting of geyser of capacity 25 Ltrs including grouting of nut bolts washers and all electric connection, hot and cold pipe complete all as specified and directed .
Material and labour Steel work in tubular railing including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I. S.1161-1979 grade St.-240 including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge (upto 08 storey ht of bldg).
M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, roofs fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge (upto 08 storey ht of bldg).
M&L applying two coats of synthetic enamel paint over a coat red oxide primer on newly steel surfaces over 10cm width/girth incl preparation of the surfaces.
M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, and PB etc. Note Additional column casting for standing of piers.
M & L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions.
M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L AAC block masonary using standared quality of light weight blocks, required size jointed with chemical adhesive in straight or curved on plan exc 6m mean radius, built in complete all as specified and directed.
Material & Labour for Sand faced cement plaster 20 mm thick in two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering mixed with water proofing compound , incl using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. including necessary working platform (scaffoldings) and safety measures Complete all as specified and as directed by Engr-in-Charge (upto 08 storey ht of bldg)
Supply only Integral water proofing compound
M& L for two coats of oil bound distemper on walls after complete removal of existing treatment (internal) all as specified.
Material & Labour for two coats of rain coat over a one coat of primer including prepartion of newly plastered external surfaces of walls etc complete all as specified and directed by Engg-In- Charge.
Supply and fixing Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed partly louverd type)/door etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc including taking down existing window complete all as specified and directed by Engg-In- Charge. Note: (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified and directed by Engg-In- Charge. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .
M&L framed work such as grills ,grating,etc,with ends of bars shouldered and or riveted or forged into spike ;framed guard bars for windows and iron gate confirming to Fe 410-0 or Fe 310-0.
Supply and fixing 5.5 mm thick plain glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engg-In- Charge.
Cutting into existing Column for connecting new Columns and making good to existing columns , complete all as specied and directed by the Engr-in-Charge
S & F Cromium plated towel holder twin type SS complete all as directed. (Make : Jaquar, model No - AKP-35715PS or Equivalent)
S & F Cromium plated wall mixture with provn for over head with 115 mm long bend pipe on uper side connecting legs & wall flange complete all as directed. (Make : Jaquar, model No - QQP-7273PM or Equivalent)
BOB ENTERPRISES
Unitech Enterprises
M/S V N ENTERPRISES
SHREE JAGDISH FURNITURE CO.
SRI RAM CONSTRUCTION
SHRI SAI ENTERPRISES
P LAXMI AND CO.
satguruenterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .