PROVISION OF QTY - 01 ROOM, TOILET AND PARKING SHED FOR SMC AT 58SU AF STATION CHIMNEY HILLS

Amount

M&L surface excavation in hard/dense soil n exc 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out complete all as specified and as directed.

M&L Cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in post holes filling and mass concrete, footing to column and cover slab and similar wirk complete all as specified and as directed.

M&L for 75mm thickness PCC type C-2 (1:3:6) (40mm graded agg) as in plinth protection, sub base etc complete all as specified and as directed.

M&L for 100mm thickness PCC type D-2 (1:4:8) (40mm graded agg) as in flooring complete all as specified and as directed.

M&L for 100mm thickness PCC type C-2 (1:3:6) (40mm graded agg) as in flooring complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) cills; copings, benching to man hole and drain and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and backing filling like complete all as specified and as directed by the Engr-in-Charge.

Pre-cast cement concrete 1:3:6 type C1 usnig 20mm graded crushed stone aggregate block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete

Hard core of gauge n exc 60mm deposited spread and level in layers n exc 15cm thick watered and rammed to a true surface

Returning , filling in excavated soil including spreading , Leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed

Removing excavated material (soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point, complete.

M&L Moorum/red filling in floors or pavings laid in layers n,exc 15cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) in chajjas, sunshades complete all as specified and as directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) in Fins, fascias, louvres,parapets, and railings exc.60cm in height, newels,balustrade, and the like complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers, and binders including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Formwork to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping lintels, including supports overhangs etc also splays between floors and beam etc complete all as specified and as directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed

Formwork to sides and soffits of floor or roof beam , lintels , cantilevers including supports, over hangs etc also splays between floors and beams complete all as specified and directed .

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed .

M&L white Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

M&L coloured glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

M&L forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A' (bitumen & sand) complete all as specified and as directed.

M&L Rendering 15mm thick CM (1:4) on stone masonry surfaces or surface other than fair face of brick work or concrete surfaces mixing integral water proofing compound @ 3% by weight of cement finshed even without using extra cement all as speciied and as directed .(water proofing compound will be measured seperately).

M&L Rendering 5mm thick CM (1:3) on fair faces of brick work or concrete surfaces of ceiling finshed even and smooth without using extra cement all as speciied and as directed .

M&L Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces of cement finshed even and smooth without using extra cement all as speciied and as directed .

M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed complete all as specified and as directed

M&L for prep of newly plastered surfaces of ceiling and applying two coats of white wash over a coat of primer complete all as specified and as directed complete all as specified and as directed

M&L for prep of newly plstered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed complete all as specified and as directed

M&L preparation of new wooden surfaces and applying two coat of synthetic enamel painting tover a coat of pink primer exc. 10 cm width/girth including filling with filler where reqd all as specified and directed

M&L for preparation of new steel surfaces and iron work over 10cm in width or girth of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.

S & F PVC (SWR) bends 110mm dia with access door any radius all as specified and as directed..

S & F PVC (SWR) junction single, 110mm dia with access door (Single T) equal or unequal all as specified and as directed

S & F PVC (SWR) bends 75mm dia with access door any radius.all as specified and as directed

S & F PVC (SWR) junction single, 75mm dia with access door (Single T) equal or unequal all as specified and as directed

S & F PVC (SWR) gully traps 125 /110mm, setting and jointing with solvent cement.all as specified and as directed

S & F PVC (SWR) floor trap, 75mm dia outlet plain with grating including jointing with solvent cement all as specified and as directed

S & F PVC (SWR) pipes 110mm dia single socketed any length, fixed to wall complete all as specified and as directed..

S & F PVC (SWR) pipes 75mm dia single socketed any length, fixed to wall complete all as specified and as directed..

S&F PVC (SWR) vent cow 110mm dia complete all as specified and as directed.

S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete with glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer all as specified and directed.

S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete without glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer all as specified and directed.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S&F 105 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed complete all as specified and as directed..

S&F 35mm thick flush shutters, solid core construction, with block core and plywood face panels, commercial type on both sides, fixed to chowkats all as specified and as directed.

S&F 2nd class hard wood, 35mm thk glazed/ skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/guaze etc edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass/ guaze. Note : glazing/gauzing will be measured seperately. all as specified and as directed.

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , backing filling, bed block and like complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts 200mm of extruded section complete all as specified and as directed,

S&F aluminium anodized handles 150mm long complete all as specified and as directed

S&F 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and as directed.

S&F floor door stopper of aluminum alloy body 140mm complete all as specified and as directed.

S&F aluminium anodized handles 100mm long complete all as specified and as directed

S&F aluminium anodized barrel tower bolts 100mm of extruded section complete all as specified and as directed,

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel

S&F GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples all as specified and as directed.

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and as directed

S&F 3mm thick Sheet glass, ground or obscured or frosted on one side and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and as directed.

S&F 300mm, MS ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F Alluminium (Extruded section ) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F vitreous china wash down water closet pedestal pattern white with 'P' and 'S' trap and water closet seat cover including fixing bolts etc complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin, white, flat back, size 550 x400 mm incl CP waste coupling but excluding taps, waste , chain and plug and porcelain stopper including mild steel brackets fixed to wall with PCC type B-0, , including cutting for or pinning in a brackets complete al as specified and directed by the Engr-in-Charge.Make : Hind ware, Parry ware, Hindustan or equivalent

S&F 10 ltrs capacity PVC Flushing cistern high level/low level with inlet, ball valve, float, handle incl fiting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the exisging fittings complete all as specified and as directed. Make : Prayag or equivalent make.

S&F PVC waste pipe for 32mm dia for Wash basin with PVC reducer of size 60mm long complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nut of length 600 mm

S&F15mm dia fancy type bib tap cast copper alloy capston head chromium platedscrewed down for iron pipe completed..

S&F 15 mm dia fancy type pillar tap cast copper alloy with capstan head , chorium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts scrwed for iron pipe and fixed. complete all as directed..

S&F 20mm dia ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe all as specified and as directed by the Engr-in-Charge.

S&F CP soap dish fixed to wall complete all as specified and directed by the Engr-in-Charge.Make : ESSCO or equivalent make.

S&F CP toilet paper holder with flap, fixed to wall complete all as specified and directed by the Engr-in-Charge Make : ESSCO, parryware or equivalent

S&FCP 15 mm bore angular stop cock screwed iron pipe complete all as specified and as directed (Weight not less than 90 gms) Make: ESSCO, parryware or equivalent.

S & F CP floor gratings 150mm dia all as directed by the Engr-in-Charge

S&F Hand shower (Health faucet ) with 8mm dia 1 mtr long flexible tube and wall hook complete all as specified and directed.. Make : ESSCO, CERA or equivalent.

S&F 15mm bore mild steel galvanised steel tubing meadium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed

S &F rotational moulded polythene water storage tank 1000ltr capacity (culinderical vertical with closed top ) hoisted and fixed in position and connecting the inlet and out let pipe etc complete all as specified and as directed.

S&F 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M&L 50mm average thickness cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate), on RCC roof slab complete all as specified and as directed

M&L 10mm thick plaster on concrete surfaces in CM 1:4 mixed with water proofing compound, finished the surface even and smooth without using extra cement all as specified and as directed Note WPC supply only measured and paid seperately.

Supply only liquid water proofing compound.

M&L for applying oil bound biltumen primer @0.20Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0kg/Sqm reinforced with non woven polyester matt weighing not less than 160gm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650N/5cm in longitudinal and transverse directions respectively of the reinforcement, tearing strength of 180N by torch on application including min 10cm side over lap & 15cm end laps and over the membrane finishing with solor reflective Bituminous aluminum paint @0.1kg/Sqm complete all as specified and as directed. Note The work shall be carried out only through manufacturer or their authorised applicator and a written gurantee for work shall be submitted by the contractor.

M&L treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Demolition cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe-410-W(Gde E-250)quality B complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins, channels where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate Fe-410-W(Gde E-250)quality B complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Plain, Aluminium sheeting, Alloy 31000 H4 0.56mm thick in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

S & F PVC (SWR) pipes 110mm dia single socketed any length, fixed to wall complete all as specified and as directed..

S & F PVC (SWR) bends 110mm dia with access door any radius all as specified and as directed..

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 complete all as specified and and as directed

M&L for RCC NP3 100mm dia pipes laid in trenchesincluding fixing of collers etc.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc.,

Supply only water proofing compound.

M&L for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for NP3 pipe 100mm bore.

M&L for 75mm thickness PCC type D-2 (1:4:8) (40mm graded agg) as in sub base complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer in CM 1:4 all as specified and as directed

M&L for chequered cement concrete tiles 200 x 200 x 25 mm thick,in floors etc .seta and jointed in neat cement slurry and pointed in grey cement and pigments complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also incl suitable sunken type pressed steel terminal box and suitable laminated sheet top cover for the following :- One light/fan controlled by one, one way switch

One three pin socket outlet 5 Amp controlled by one, one way switch on independent board

All as per item No 111.01 herein before but with 2.5 sqmm and 2.5 sqmm as earth conductor on independent board for 15 Amp Socket

Supply and fix switch piano, flush type, single one way 5 Amp

Supply and fix switch piano, flush type, single one way 15 Amp

Supply and fix socket outlet 2 in 1, 3 pin, flush type, 5 Amp

Supply and fix socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type

Supply and fix ceiling rose 3 Phase / PVC/ Polycarbonate, isolated body.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

S&F in replacement SPN distribution boards protection class IP-43 single door suitable for mounting MCB with min 200 Amps rating bus bar SPN 08 way.

Supply and fixing 6 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

All as per item No 122 herein before but SPN 32 Amp

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1.0”) dia.

Cutting, screwing of exisitng steel tubing of 50mm for alterations or additions, done in position for fixing T- joint (40x25x40) complete all as specified

S & F valve stop, with iron wheel head, screwed both ends for iron pipe of 25 mm dia

Supply and lay LT under ground cable XLPE insulated armoured heavy duty 1100V grade with multistranded/solid aluminium conductor confirming to relevant IS in trenches, ducts, through pipes fixed to wall etc all as directed including cable gland, terminal socket and connecting up of size 16 sqmm 2 core including dismantling of old U/S cable

Supply and lay brunt bricks class 'B' of standard size in trenches for protection of UG cable.

M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified

S S BUILDERS

SRI AYYAPPA ENTERPRISES

M/S AMRITHESH ENTERPRISES

H S S ENGINEERS AND CONTRACTORS

S CHANDRASHEKAR (SREE BUILDERS)

KUZHIKKAL ENTERPRISES

M/s A N Kalbhavi