Repair to H.L. Bridge over Budulimunda Nallah on Gatikrushnapur Budulimunda road_Road_Painting of Bridge,Fixing of Guard post, Repair of Bridge Appron, Const of RCC culvert -1X4.00X3.00-_0.000 to 2.000

D) Earth work in ordinary soil in embankments, roads, etc. maximum laboratory dry density not less than 1.44Gm/1.52 per cubic centimeter in road embankments respective upto 3m/more than 3m high and top 0.5m below sub-grade level within 50m initial lead and 1.5m initial lift from approved borrow pits away from the toe of the final section of the road, embankment bottom of the pit not being cut be an imaginary lines having a slope 1:4 projected from the edge of the final section of the bank including rough dressing and breaking colds maximum 5cm to 7cm

Providing and applying tack coat with bitumen emulsion (RS-I) on prepared surface etc with all labour, materials, T&P, taxes and CESS etc. complete as per specification and direction of the Engineer-in-Charge

Providing & laying SDBC with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works (4th revision)

6mm thick cement plaster (1:4) to R.C.C. surfaces finished smooth including deep chiping and slury treatement including all cost of Labour, Materials etc complete.

Priming one coat with any approved primer including cost of material & labour, Cost of all T&P Required for the work all royality Charges etc complete.

Finishing Wall surface with Cement based wall putty including all cost of Labour, Materials, T&P required for the work, all royality charges etc complete.

Painting 2 coats with any approved enamel paint on new/old wood work including cost of paint & labour all materials , Cst of all royality charges, T&P required for the work etc complete.

Construction of RCC guide posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause.