PROVISION OF FALSE CEILING FOR CMG CCTV ROOM AND PROVN OF DEFICIENT TOILET FOR OOD ROOM AT MANU BLOCK (BLDG NO P-3) AT INS CHILKA AND PROVN OF GEYSERS FOR SENIOR SAILORS (BLDG NO T-40) AND JUNIOR SAILORS (BLDG NO T-42) SINGLE BLOCK AT INS CHILKA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc all complete

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate)as in foundations, filling and mass concrete etc all as specified and as directed.

M&L for RCC nominal mix Type B1 1:2:4 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete etc all as specified and directed by Engr-in-Charge.

M&L for RCCnominal mix type B1 1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and directed

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc all complete

Ditto, but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders

Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for brick work with fly ash bricks, straight or curved on plain exc 6m mean radius built in cement mortar 1:6 etc all complete

M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation etc all as specified and directed

M&L for 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor or sub base complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for preparing of surfaces of steel for painting of any description, over 10cm in width or girth, on new surface over a coat of primer of red oxide zinc and two coat of synthetic enamelled paint over it all as specified and as directed.

M & L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete curfaces mixed with water proofing compound 2% by weight of cement finished even and fairn and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately.

M&L for rendering 10mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat white wash complete all as specified and directed.

M&L for preparation of new plastered external wall surfaces of any description over 10 cm width/girth and including applying two coat of weather coat anti dust emulsion paint, exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction complete all as specified and as directed.

M & L for 75mm thick PCC type C2 1:3:6 open it (40mm garade aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge

Returning filling incl spreading, levelling watering and well ramming in layers not.exce 25 CM all as specified and directed.

Removing exca material, soil to a distance not exce 50M and depositing where directed at a level n.exe 1.50M above the existing point all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complet all as specified and as directed by Engr-in-Charge.

M&L for Clearcolle on plastered and other surfaces, preparatory to distempering applying two coat of oil bound distemper on ceiling complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. including on skirting upto 150 mm height, set and jointed in neat cement slurry and pointed in white or colouredcement to match fixed over and including 15 mm thick screed in CM (1:4) etc complete all as specified and as directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles over and including 15 mm thick screed in CM (1:4) complete all as specified and as directed

S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting / dado tiles fixed over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube supplying & fixing in opening as per specification.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails M.S frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification.

S&F mediam weight, cold rolled mild steel butt hinges of 100mm size, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F Powder coated of any colour anodized aluminum frame (minimum thickness of powdere coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S&F anodised powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 4.8mm glass frosted on one side, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pan all as specified and as directed. Make : Hindustan,Pilkinton glass works Ltd/Modiguard.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed

S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.

S&F wash hand basin vitreous china white flat back of size 580 X 450mm with brackets, complete including 15 mm bore facny pillar tap CP complete all as specified and as directed.

S&F 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-60 gms) suitable for wash hand basin complete all as specified and as directed.

S&F 32 mm dia size PVC waste pipe with cup washers complete all as specified and as directed.

S&F water closet pedestal vitreous china white pattern (EWC) white including fixing bolts including plastic seat cover white closed pattern with flat bottom and CP hinging device (excluding flushing cistern and flush pipe) including necessary connetion to trap and flushing pipe complete all as specified and directed.

S&F 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia

S&F 102mm dia grating doom of fancy chromium plated complete all as specified and directed. (Make : Prayag,Cat No FT03M)

S&F Shower rose brass chromium plated of size 125 mm with swivel joint fixing to GI pipe of 15mm dia incuding GI Elbow and nipple complete all as specified and directed. Make : Parryware Cat Part No T9809A1).

S&F 15mm dia bore of pipe Stop valves, fancy type, chromium plated with long shank and cup (concealed type) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP Bib taps in 15 mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe complete all as specified and directed.

S&F angle valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge (Make : Parryware,Cat No G5307A1)

S&F PVC connections 15mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed.

S&F chromium plated fancy type 15 mm dia bore of pipe 2 way bib cock with flange , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make Prayag Cat No 6612.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 75mm bore.

S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 bore PVC (SWR) bends with access door any radius complete all as specified and directed

S&F 75 bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed

S&F in repairs 20mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 15mm bore of tubes, 'medium grade'galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

M&L for preparation old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots of wall and applying two coat of oil bound distemper of approved shade on wall complete all as specified and directed.

S&F CP tubular rail, 20mm dia D type 600mm long as in repair, brass chromium plated and fixed all as specified and directed by Engr-in-Charge

S&F PVC soap tray fixing with screw in the wall as specified and as directed. Make : Prayag Cat No 195).

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified.

S&F in repairs 15mm dia wall mixer 3 in 1 with bend pipe complete fitting as per manufactor instruction's including removing of existing fittings complete all as specified and as directed. Make : Prayag Cat No 6480.

M&L for sub main wiring with 2 runs of 4 sqmm PVC insulated unsehathed copper cable multistand 1100V of FRLS grade with drawn in and incuiding surface PVC casing-caping width not less than 25mm and one run of PVC insulated servieable of 4 sqmm as earth continuity conductor drawn in casing and capping with accessories complete. Note: 3 runs of 4 sqmm and 1 run of casing- caping will be measured as one unit i.e RM

Supply and fix AC single phase, 230 volts electirc water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection peice etc. including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, PVC pipe connection and grouting and making good to distrubed surface complete all as specified and as directed. Make: Khaitan/ almonar/ Crompton Greaves/ Bajaj

Supply and fix in replacement of factory made sheet metal enclosure with protected type 2 pin and earth plug and complete socket with one MCB SPN 240 volt, 20 Amps all as specified.

Supply and fix MCB SP 6 to 32 Amps 240 Volts

ABHIMANYU MAHARANA

M/s Ats Electricals

M/S JAGANNATH SASMAL