REPAIR AND MAINTENANCE OF JOINERY PLUMBING SANITARY WARE INCLUDING FITTING AND FIXTURE AND ALLIED WORKS IN RESIDENTIAL AND TECHNICAL COMPLEX AT ADRDE AGRA AND REPAIR AND MAINTENANCE OF SECURITY FENCING BOUNDARY WALL GATE DRAINS CULVERTS FOOTHPATH H

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 300x200x6-7mm thick in vertical surface of walls like skirting/ dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:3 on other than fair faces of brick work wall finished rough to fix tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450x300x7mm thick in vertical surface of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:3 on other than fair faces of brick work wall finished rough to fix tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement platser 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @3kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 ( 1cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified (Note- payment for providing groove shall be made separately)

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including screed bed or bedding layer of mortar 10 mm thick in Cement Mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing & fixing in repair semi perforated 12mm thick false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 60 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sqm complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Refixing shutters includes taking down,easing,adjusting and also refixing builder hardware as required of any description exc 1.00Sqm mtr and n:exc 2.00Sqm in each in same opening complete all as specified.

Taking down shutters of any description exc 1.00 Sqm mtr and n.exc 2.00 Sqm in each complete all as specified and directed

Note for above Items : (i) Any CI/AC/PVC pipes or pipe fitting damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding. (ii) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n exc 1.00 Km all as directed by Engineer -in -charge. (iii) For deciding the girth of the plant/tree the height shall be taken at 30cm above the slab/wall. (iv) The labour employed by the contractor for carring out the work shall be provided with safety equipment and quoted rate shall be deemed to include the same. (v) All window, joineries, mirrors, fittings, doors etc, shall be covered before painting the surface and the same shall be cleaned including cleaning of floor as directed by the the Engineer-in-charge. (vi) Work to be carried out upto 15.00 mtr height with necessary MS scaffolding including all other safety precautions and quoted rate shall be deemed to include the same.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate , sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and directions of Engineer-in-Charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings (SSR or TD) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete (SSR or TD) all as specified and directed.

S&F 35 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats as per drawing (SSR or TD) complete all as specified and directed.

S&F 35mm thk 2nd class Hard wood Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S & F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately under respective item

S&F for steel ventilators with top hung shutter including hinges,steel peg stay complete all as specified and directed. Note: Wire cloth and glass shall be measured and paid separately under respective item

M&L for anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening including MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 complete all as specified and directed.

S&F Butt hinges 100 mm size, medium weight, cold rolled stainless steel completed all as specified.

S&F aluminum handle cast type anodized 150mm size complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors chowkhat and windows frame all as specified and directed.

M&L two coats of synthetic enamel paint on new steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for hacking out old broken glass any thickness size, quality or description from wooden frame glazed with putty or fixed with beads completed all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

Supply and fixing wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

Supply and fixing in repair wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

Supply and fixing for 3 mm thick ordinary Sheet glassof ordinary quality and glazing with aluminium rubber brush strip/fillet or beads, nut bolts or with rivets/pins in square exc 0.5 sq. m in each pane completed all as specified.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main bodywith stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking up or down 15 mm bore GI water tubing and connections, including removing from site complete all as specified and directed.

Taking up or down 20 mm bore GI water tubing and connections, including removing from site complete all as specified and directed.

Taking up or down 25 mm bore GI water tubing and connections, including removing from site complete all as specified and directed.

Ditto- all as per Item No. 5.00 above but as in skirting including 10 mm thick rendering in CM 1:3 complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair brass chromium plated shower roses with or without swivel joints 125mm size with CP long shank arm including fixing to steel pipe or union complete all as specified and as directed.

Supplying and laying of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all Brass fittings, cutting, chasing, pinning complete all as specified and directed.

S&F in repair 15mm dia Fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts,screwed for ironpipe and fixedcomplete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover

S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets and fixing with 100 mm brass hold fast including 32mm dia PTMT waste coupling, and 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Disamantling of stone slabs and tiles of any description or thickness in floors,aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

All as per item no. 87.00 but except bricks( bricks used shall be retrieved from item no.86.00 i.e from demolition).

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks of exc 250 litres and n. exc 500ltr capacity and from mouths of circulating pipes, incl writing date of cleaning on tank etc. complete all as specified and directed.

S&F in repair 15 mm CP wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated wall/sink mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repair 20 mm bore Float/ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe & fixed complete all as specified and directed.

and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified & directed.

S & F in repair chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete in all respect as specified.

S&F in repair 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality Complete all as specified and directed by Engineer - in - charge.

Supplying and laying of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all Brass fittings, cutting, chasing, pinning complete all as specified and directed.

S & F in repair 100mm chromium plated Grating doom complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints and fixed to walls with clamps complete all as specified and directed.

S&F 32 mm dia Semi Rigid PVC waste pipe for sink , wash basin and urinal with length not less than 700 mm complete all as specified and directed.

S&F PVC(SWR) bends 110 mm bore dia complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. Note:- Excavation, RFR,removal shall deemed to be concluded under this item only.

S&F in repair Chromium plated 20mm dia, D type,60cm long towel rail fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.

S&F in repair 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cupboard shutters & shelves and pelmet boxes etc all as specified and directed by Engr-in-charge.

S&F in repair of rotational moulded polyethylene triple layered water storage tanks white in colour with 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilator including providing and fixing hinges/ pivots and makingprovision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws inclusive of all fittings and fastner rate etc. all complete as per architectural drawings and the directions of Engineer-in-charge

S&F Stack clamps for 100 mm bore pipe made out of 50 mm by 5 mm flat iron & 16 mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof complete all as specified and directed.

S&Fin repair 1mm thick stainless steel plate rack over all size 900mm X 600X250mm of standard pattern and make as approved by GE complete all as specified and as directed.

Taking down of cement or cement lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc including removal of debris complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with WPC on fair faces of brick work finished the surface even and smooth without using extra cement complete as specified and directed.(Rate of WPC included in this item)

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Dubbing out with CM1:4 average 10mm thick on irregular face of walls/ceiling complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:3 finished even & smooth (without using extra cement) complete all as specified and directed

S&F in repair of rotational moulded polyethylene triple layered water storage tanks white in colour with 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and applying Two coat of Oil Bound Distemper over a coat of primer using roller complete all as specified and directed

M&L for Preparation of newly plastered ceiling surfaces and applying Two coat of Oil Bound Distemper over a coat of primer using roller complete all as specified and directed

S&F of magnetic catcher of approved quality in cub board and kitchen cabinet including fixing with necessary screws double strips (horizontal type ) complete all as specified and directed.

S&F of steel tank cover with zinc coating, dia of cover 500 mm and height 150mm of cut spherical shape and gas welded of spikes 2mm dia and 50mm length at 50mm c/c both bay in zig zag motion with ms hinges, hasp and staple fixed to existing PVC water water storage tank of any capacity including dismantling of old pvc water tank cover complete all as specified and as directed.

M&L for removal of plants/trees/Shrubs from roof tops/sides, external walls of bldg, chajjas, wall junctions of rains water/CI soil /waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surface using (1:2:4) type B-O or cement mortar (1:2)including repairing the GI/CI/PVC pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surface to match with existing including necessary scaffolding/staging upto a height of 15.00 mtr from the ground level complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type chromium plated stop valve/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed including all Brass fittings, cutting, chasing, pinning complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillars etc complete all specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

rtar1:2, securing urinal to plugs withand including 60mm long brass screws, pointing around urinalback in cement; fixing automaticflushing cistern with brackets flush pipe, grating and Union fordischarge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe)

M&L for preparation of newly plastered wall surfaces and applying Two coat of Cement Base paint over a coat of alkali resistant primer on new surface complete all as specified and directed..

M&L for providing and applying minimum 1mm thick wall care putty over prepared surface including sanding of the putty surface after drying to achieve even and smooth finish on wall or ceiling surface for paintintg complete all as specified and directed.

Fixing only in repair G.I. chain link fencing including line wires,any mess size and type to any of standard rails, straining bolts,MS bars etc including provn of winding wire,welding of angle iron or MS flat piece into existing section all complete all as specified and directed.

M&L for preparation of old decorated/plastered surfaces of wall (brick & concrete) and apply two coat of cement base paint as specified and directed.

S&F in repair 100mm Hasp and staple, safety type, Brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed by Engr-in-charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on newly prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on old prepared surfaces of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 Mpa ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including taking down old sheeting complete all as specified and directed.

S&F in repair Continuous (piano) hinges, Mild steel, bright finish or electrogalvanised having 30mm width of flaps (when open) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 Mpa ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including taking down old sheeting complete all as specified and directed.

S&F angle iron posts and rails,drilled and strut in fencing including cutting tops to shape as directed, drilling holes,notching for wire,etc,flat iron fillets(for securing wire mesh etc) including necessary drilling,bolting and riveting,etc and similar work conforming to Fe-290 gde E-165 as specified and directed by engr-in-charge. Note- MS flat, round bars and MS bolts as supply only shall be measured and paid separately under respective item.

Supply only mild steel screw bolts (machine made) with (16 to 20mm dia of neck) hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long as specified and directed.

Supply only mild steel flat, round or square bar for weaving in chain link fencing, in available length Fe290 (Gde E-165) quality A complete all as specified and directed.

Dismantling structural steel work including doors,gates but excluding framed truss etc. as specified and directed.

S&F of chain link fencing of aperture size 50X50mm made of 3mm dia GI wire including fixing to angle iron posts and including dismantling of old chain link fencing complete all as specified and directed.

Dismantling post or struts (wood,steel or RCC) any section,embedded in concrete, brick work,masonry,etc, including taking out embedded portion and making good to the disturbed ground complete all as specified and directed.

S&F framed work as in door or gates of angle or other section with gusset plates,rails braces, etc, complete,drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding and hanging door fittings ( exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and holdfast complete all as specified and directed.

M&L for 75mm thick cement concrete type C-1 (1:3:6) (using 20 mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement with forming construction joints filled with filler incl demolition complete all as specified and directed by Engineer-in-Charge.

M&L in repair precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate,40mm thick louvres and jallies including all moulding set in CM 1:4 complete all as specified and directed.

M&L for two coat of synthetic enamel paint to new or previously untreated steel surface of any description, n.exc 10cm in width or girth, not otherwise described over one coat of red oxide zinc chrome primer including preparation of surfaces as specified and directed.

M&L for one coat of synthetic enamel paint including preparation of surfaces to old steel surface of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for 60mm thick machine pressed precast rubber moulded coloured cement concrete interlocking tiles/paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006, M-35 grade including over 50mm thick sand cushion complete all as specified and directed.

S&F in repair for Vitreous China bowl urinal flat back of size 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipecomplete including providingand fixing plugs, bedding urinal against wall in cement mo

S&F Dholpur stone 16 to18mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.50 sqm fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment with 10mm thick CM1:4 as specified and directed.

M&L for Easing and adjusting of steel door/gate incl removing rusted and forging materials and replacing broken hinges/hold-fast including welding and all labour complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of j

oints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair concertina coil 1050mm dia ( in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18SWG) fixed over razor wire at points whereever coil touches the bottom of razor wire with the help of hog rings (14 SWG) complete all as specified and directed. (Note:Razor wire shall be measured and paid separately).

M&L for removing old enamel paint and cleaning with scrapers, any number of coats any width or girth from concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed by Engineer-in-charge.

Supply and fix in repair new razor wire fencing with 2.6m dia and 14mm width,0.5mm thick razor strip fixed with clamps to angle iron or swan neck angle or to existing angle iron as directed by engr -in-charge.

M&L for welding in repairs exc 2.5cm but n exc 5 cm in length and thickness of metel exc 6mm but n exc 9mm to be welded and jointed (for fixing small articles like helical spring etc) complete all as specified and directed.