Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹38.6 L+₹1.4 L (3.64%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹41.9 L+₹4.6 L (12.4%)Rejected-AOC | L3 | Rejected-AOC Being not L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
23 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
MECHANIZED APPLICATION OF FINISHES AND REPAIR TO CONNECTED WORKS IN OFFICERS MARRIED ACCN UNDER AGE B R N NO. I OF GE NORTH SECUNDERABAD
2023_MES_629708_1
8735
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹80,000
Yes
29 Jan 2024
24 Nov 2023
25 Dec 2023
24 Nov 2023
23 Dec 2023
9 Dec 2023
Amount
M&L for complete removal of existing treatment of Internal / External surface of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust. Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner, etc., and applying 3.00 mm thick white cement based wall care putty smooth finish complete all as specified and as directed. Make:-Birla White / Asian Paint / Diamond wall putty. Note: Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc.
M&L for applying 2 coats of weather proof paint over a coat of primer including preparation of old/new putty applied wall ceiling surfaces and allow it to dry before taking up the first and second coat of paint etc., with fully automatic airless spray machine of paint application complete all as specified and directed. Make: Apex Ultima from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux. (I) Unit time quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (II) The rate of application of primer and two coats shall be as per manufacturers instructions. (III) A time gap of eight hours shall be maintained between the application of primer and each coat . (IV) Application of primer and paint shall be done by an authorised applicator of the paint. (V) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (VI) The user unit will be handed over the as per manufacturers instructions coverage area of qty of material contracted by the MES and same will be issued to the contractor for External periodical services by the user unit.
M&L for applying two coats of distemper (oil emulsion) over the primer surface of approved make & shade on walls of up to any height etc, complete all as specified and as directed.
M & L for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.
M & L for preparing the old plastered or unplastered decorated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.
M&L for obilatering old writing of any description, n exc 0.1 sq m, with paint to match existing work complete all as specified and as directed.
M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free ) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed. Make:- Dr fixit /Berger / Perma
Taking down cement plaster on brick or stone walls/ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
M & L for rendering 10 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in patches n exc 3 Sqm each patch complete all as specified and as directed.
M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 Sqm each patch complete all as specified and as directed.
M & L for rendering 15 mm thick in two coats, 10 mm thick in cement plaster 1:6 and 5 mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound.
M & L for preparing newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
M & L for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer using chalk whiting etc., complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux
Cutting down plants/trees of girth n exc 15 cm from roof tops/sides of external walls of buildings, chajja, wall junctions, junctions of rain water/soil/waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (Herbal medicine) and making good to suit the adjointing surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 with necessary scaffolding/staging etc upto any height complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to ensure leakage/seepage free joint without any extra cost to the department.
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQMs each complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed
Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.36mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc., complete all as specified and as directed. Make: NCL/ELEXIR MET/ASHWANI & SONS
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc., complete all as specified and directed.
S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and as directed.
S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.
S&F in repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern) etc complete all as specified and directed..
Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and directed.
S&F UPVC/PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc., complete all as specified and as directed.
S&F 75mm bore UPVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc., complete all as specified and directed.
S&F 110mm bore UPVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc., complete all as specified and directed.
S&F 75mm bore UPVC/PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc., complete all as specified and as directed.
S&F 110mm bore UPVC/PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc., complete all as specified and as directed.
S&F 75mm bore UPVC/PVC (SWR) branch piece, single (single Y ) equal or unequal with access doors etc., complete all as specified and as directed.
S&F 110 mm bore UPVC/PVC (SWR) junction single (single T ) equal or unequal with access doors etc., complete all as specified and as directed.
S&F 75mm bore UPVC/PVC (SWR) vent cowl etc., complete all as specified and as directed.
S&F 110 mm bore UPVC/PVC (SWR) vent cowl etc., complete all as specified and as directed.
Supply and fix 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall ceiling or in floors etc. complete all as specified and as directed
Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc., complete all as specified and as directed
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres APP, membrane grit finish on roof slab all as per manufacturer's instructions and zonal specification etc complete all as specified and as directed.
M&L for 20mm thick screed bed in CM 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement or as per manufacturer's instructions surface etc complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
M&L for laying 300 mm x 300 mm x 20 mm thick PCC tiles (Hydraulically pressed) with grey cement, set, jointed, cut and polished. The joints shall be grouted and immediately after gouting, the joints shall be pointed flush in in CM 1:3 mixed with 150ml per kg of cement of polymeric based liquid water proofing additive by weight of cement or as per manufacturers instructions etc all as specified and directed. (Note : Supply of polymeric based liquid water proofing compound will be measured and paid separately)
Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
M & L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulsion primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of membrane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified.
Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete complete all as specified and as directed.
M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc all as specified and directed.
M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.
Supply only polymeric based water proofing compound of ISI marked complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed
Material and labour for half brick thick walls with sub-class ‘B’ old size bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.
S&F Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F in repair for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.
S&F for 20mm gun meteal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as directed.
S&F in repairs Ball valve of size 25mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs Ball valve of size 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.
S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc complete all as specified and as directed
Dismantling of wrought iron or MS works of any description such as ,chajja etc, including necessary straightening of bends complete all as specified and directed.
Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed.
Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based Corrugated steel sheet 0.50mm thick, AZ-150 of approved colour and mangalore pattern having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain/profiled steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed.
M&L for new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and as directed.
GUTHIKONDA BROTHERS
M/s GM Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .