Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.2 L+₹2.5 L (7.80%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹35.6 L+₹3.0 L (9.07%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹37.6 L+₹5.0 L (15.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹40.4 L+₹7.8 L (23.8%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹44.9 L
EMD Value
₹90,000
Closing Date
1 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
Welcome maint with B/R and E/M misc. works for offrs accn in pawan vihar and naidu enclave at Old Cantt Allahabad.
2022_MES_531320_3
8566/E8
Open Tender
Civil Works
Item Rate
270 days
Allahabad
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹90,000
Yes
3 Feb 2023
10 Nov 2022
3 Dec 2022
10 Nov 2022
1 Dec 2022
24 Nov 2022
10 Nov 2022 - 17 Nov 2022
Amount
Preparation of old decorated plastered surfaces of ceilings including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of white wash, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of white wash, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of acrylic emulsion paint of approved colour, complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of white colour / approved colour, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Vitrified ceramic light shade tiles 9 mm thick, size of each tile shall be upto 600mm x 600mm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Vitrified ceramic light shade tiles 9 mm thick, size of each tile shall be upto 600mm x 600mm, as in vertical surfaces such as skirting / dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 10 mm thick backing coat in CM 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 350mm x 250mm x 7mm / 450 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof or wall covering, complete all as specified and directed..
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
Tubular sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc, conforming to Fe 410-W (Gde-E- 250) quality-A as in purlin, rafter, complete all as specified and directed.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, valley gutter, ridge hips etc, fixed with self tapping screws, complete all as specified and directed.
Demolition of Reinforced Cement Concrete as in slabs n exc. 15 cm thickness in any position and any description not otherwise specifically provided, including cutting of reinforcement as required to facilitate demolition and removing rubbish off the MD premises, complete all as specified and directed.
Reinforced cement concrete 1:2:4 type B1 (20mm graded stone aggregate), as in slab supported on walls and beams & shelves and similar works, complete all as specified and directed. NOTE:- Reinforcement shall be measured and paid separately under respective items of this Schedule.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Granite, 15-18mm thick, (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4 including rubbing and polishing, nosing the edges half round, complete all as specified and directed.
Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Formwork to rough finished sides and soffits of slabs n. exc. 200mm thick and similar works, complete all as specified and directed.
Stainless steel sink without drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 610mm x 455mm x 255mm, fixed in repairs, complete all as specified and as directed.
Brickwork with fly ash old size bricks (crushing strength not less than 75 kg per sq.m) sub class 'B' bricks , straight or curved on plan exceeding 6metre mean radius, built in CM 1:6, complete all as specified and directed.
Brickwork in half brick thick walls with fly ash old size bricks (crushing strength not less than 75 kg per sq.m), sub class 'B' bricks , straight or curved on plan exceeding 6metre mean radius, built in CM 1:4, complete all as specified and directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.
Rendering 15 mm thick in CM 1:6 on other than fair faces (Internal surface) of brick work or concrete surfaces of walls, complete all as specified and directed.
Rendering 15 mm thick in CM 1:4, on fair faces of brick work or concrete surfaces of walls including water proofing compound complete all as specified and directed. Note :- The qouted rate shall be deemed to include water proofing compound.
Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour with 1mm thick wall care putty, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of cement primer, complete all as specifed and directed.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.
Rotational moulded HDPE water storage tanks white colour (cylindrical vertical with closed top), 1000 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, including provision of GI nipple for tank, including ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.
Rotational moulded HDPE water storage tanks white colour (cylindrical vertical with closed top), 500 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, including provision of GI nipple for tank, including ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.
Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.), 15mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.
Pillar tap with Swan neck cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'HOT' or 'COLD' letter with long screwed shank and fly nuts, screwed for iron pipe 15mm bore pipe, fixed in repair, complete all as specified and directed.
Vitreous China wash hand basin with pedestal, flat back, size 550mm x 400mm white, excluding taps, chain and plug and porcelain stopper but including cantilever brackets of mild steel angle 35 x 35 x 5mm, including cutting for and pinning in ends of brackets or erecting stand, with provision of Waste coupling of brass 32mm dia, PVC waste pipe 32mm dia, inlet and outlet screwed for pipe including necessary packing, union and cap, fixed in repairs, complete all as specified and directed.
PVC (SWR) floor trap, 75mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate), fixed in repair, complete all as specified and directed.
Stainless steel plate rack / utensils rack of size 900mm x 1200mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of AGE B/R Old Cantt, complete all as specified and directed.
Stop valves, cast copper alloy, fancy type, chromium plated (concealed type), with chromium plated wall flange, screwed down, high pressure, long shank and exposed part kit with fitting sleeve, operating lever concealed part, screwed both ends for iron pipe or for unions and fixed, 15mm bore, fixed in repairs, complete all as specified and directed. Make: Cera, Jaquar, Plumber, Prayag, Essco.
Bib taps (fancy type), cast copper alloy, long body chromium plated with crutch or butterfly hnadle, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, fixed in repairs, complete all as specified and directed. Make: Cera, Jaquar, Plumber, Prayag, Essco.
Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15mm bore, fixed in repairs, complete all as specified and directed. Make: Cera, Jaquar, Plumber, Prayag, Essco.
CP grating, 100mm dia, fixed with coloured cement, joint to match the existing surface of tile, fixed in repair, complete all as specified and directed.
PVC low level, 10 litre capacity, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC pipe 600mm long, fixed in repairs, complete all as specified and directed .
Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc) with CP mild steel hinging device, fixed in repairs, complete all as specified and directed. Note :- Plastic seat cover shall be measured separately as supply only as considered under respective items.
Supply only Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
Plain cement concrete 1:2:4 type B-0 (12.50mm graded stone aggregate), as in levelling course, benching etc., and finished the surface even and rough to receive screed bed, complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down shutter of any description exceeding 1 sqm not exceeding 2 sqm each complete all as specified and directed.
PCC 1:3:6 type C-1 (using 20mm crushed stone aggregate) as in fixing of hold fasts with and including provision of necessary form work if required complete all as specified and directed.
Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc, conforming to Fe 410-W (Gde-E- 250) quality-A as in chowkhat, ladder, strut in posts, complete all as specified and directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore / M/s Kumar Arch Tech Ltd.
Glazed and skeleton shutters, 30mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
Flush shutters 35 mm thick, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Fabrication & fixing in repairs, of modular kitchen with cabinet / shelves and wardrobe / cupboard made out of 18mm thick PVC board plain colour and laminated (sheet shall be laminated over PVC board with synthetic adhesive on external face), fixed with piano hinges including making provision for baskets / cutlery basket with handles and door shutters, complete all as specified and directed. NOTE:- PVC sheet, fittings and fixtures shall be measured and paid separately under respective items of this Schedule as 'Supply only'.
Supply only 18 mm thick Rajshri Celuka ply of Single Side Prelam/ Rigidlam color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed. Make- Rajshri Plastiwood or its equivalent.
Supply only 18 mm thick PVC Celuka Ply Plain White color both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed. Make- Rajshri Plastiwood or its equivalent.
Supply only 12 mm thick Rajshri Celuka ply of plain white(Matt finish) color fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed. Make- Rajshri Plastiwood or its equivalent.
Supply only 75 mm dia oval shape aluminium handle fancy type brass polished bright finish complete all as specified and directed
Supply only chromium plated stainless steel 304 grade wire basket for different types of utensils with necessary fixing clips fixed in cupboards etc complete in all respect complete all as specified and directed
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or supporting stand for desert coolers etc., and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Factory made uPVC white colour Sliding window Three track of area not exc 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2(+/- 0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories., complete all as specified an directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.
Factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if equired) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Sheet glass, 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete as specified & directed.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs, complete all as specifed and direcetd.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame (with and including punching or drilling out old glazing pins/spring clips and providing and fixing new ones) or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
Sheet glass, 4.0 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane, complete as specified & directed.
Stainless steel, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.
Butt hinges, medium weight, stainless steel, and fixed, 100mm size, complete all as specified and directed.
Stainless steel handles, fabricated type, 150mm long, complete all as specified and directed.
Stainless steel, barrel tower bolts of extruded section and fixed in repair, 150mm long, complete all as specified and directed.
Butt hinges, medium weight, stainless steel, and fixed in repair, 100mm size, complete all as specified and directed.
Stainless steel handles, fabricated type, 150mm long, fixed in repair complete all as specified and directed.
Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 150mm size, complete all as specified and directed.
Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed.
Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, in repair complete all as specified and directed.
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Stainless steel drapery rod, 25 mm dia, cut to size and fixed in position including brackets and end knobs fixed to wall, in repair, complete all as directed.
Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.
Brass chromium plated bottle traps, 32mm bore, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), but including provision of lime concrete bedding, including provision of CI trap 100mm size, outgoing flushing pipe 32mm dia and anti-syphonage pipe, fixed in repair, complete all as specified and directed.
GI union, 15 mm bore, fixed in repair, complete all as specified and directed.
GI elbow, 15 mm bore, fixed in repair, complete all as specified and directed.
GI socket, 15 mm bore, fixed in repair, complete all as specified and directed.
GI nipple, 150mm long, 15mm bore, fixed in repair, complete al as specified and directed.
GI nipple, 100mm long, 15mm bore, fixed in repair, complete al as specified and directed.
GI nipple fully threaded with two numbers check nuts and washers for PVC tank with back nut and washers for inlet and outlet pipe, 15mm bore, 100 mm long, fixed in repair, complete all as specified and directed.
GI nipple fully threaded with two numbers check nuts and washers for PVC tank with back nut and washers for inlet and outlet pipe, 20mm bore, 100 mm long, fixed in repair, complete all as specified and directed.
Center hole / basin mixer, 15mm size, with casted spout CP brass with swinging including plugging and security to walls, fixed in repairs, complete all as specified and directed.
Bathroom cabinet mirror of hard thermosetting plastic of size 625mm x 625mm fitted with superior quality distortion free 4mm thick mirror, fixed in repairs, complete all as specified and directed.
Fiber sheet corner shelf, fixed in repairs, complete all as specified and directed.
Hand shower (health faucet), CP, with 8mm dia and 1.50metre long flexible tube with wall flange and hook with back flow prevention in-built (NRV), fixed in repairs, complete all as specified and directed. Make: Cera, Jaquar, Prayag
Chromium plated towel rack with lower hanger, brass railing , including brass screw, fixed in repair, complete all as specified and directed.
Fiber sheet shelf, 450x125mm with bracket, fixed in repairs, complete all as specified and directed.
PTMT tumbler holder, fixed in repairs, complete all as specified and directed.
Wall mixer with telephonic type shower arrangement, CP, fancy type, suitable for 15mm bore pipes, fixed in repairs, complete all as specified and directed.
Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as specified and directed.
Shower rose with shower arm 20mm dia and 190mm long round shape with 90° bend for wall mounted showers with stainless steel flange, complete all as specified and directed. Make: Jaquar Cat Part No SHA-477 or techno-commerically equivalent model in Prayag / Cera or as approved by GE.
PVC connections 15mm size, of length 450mm, both ends having PTMT nuts, fixed in repair, complete all as specified and directed.
Bib cock, 2 way, with wall flange 15 mm dia including fixing to pipe , fixed in repair, complete all as specified and directed. Make: Jaquar cat No. FUS-29041 or any techno-commercially equivalent model in Cera , Prayag.
Angle cock, 2 way, with wall flange 15 mm dia including fixing to pipe, fixed in repair, complete all as specified and directed. Make: Jaquar ,Cera ,Prayag
Toilet paper holder with stainless steel flap fixed to wall etc, complete all as specified and directed. MAKE:- Jaquar Cat No. ACN-1151N or techno-commercially equivalent model in Prayag or Cera.
Continuous (piano) hinges mild steel bright finish or electro galvanized 40mm width of flaps (when open), complete all as specified and directed.
Supply only Chain link MS galvanised fencing, any size or type as per sample approved by GE, complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surface, complete all as specified and directed.
PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling or mass concrete or similar wrok complete all as specified & directed.
Dismantling posts or struts ( R.C.C.) any section, embedded in concrete, brickwork or masonry including taking out embedded portion and making good disturbed ground, complete all as specified and directed. NOTE:- Embedded portion of the dismantled post shall only be measured and paid.
Dismantling fencing wire mesh, any type, complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.
Taking down main switches, distribution boards and old cut-outs etc., of any type and carefully along with the existing boards and removing the same from site and making good disturbed surfaces of walls to match with the existing, complete all as specified and directed.
Taking down carefully sub-main wiring of any type and any numbers including earthwire surface type / concealed type and removing the same from site and making good disturbed surfaces of walls to match with the existing, complete all as specified and directed.
Point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid concealed PVC conduit 'medium grade' ISI marked including all conduit accessories, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-
(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch
(b) One light point controlled by two way switch 5 Amps
(c) One 5 pin, 5 Amp socket outlet point on an independent board.
(d) One 5 pin, 5 Amp socket outlet on the same board with other switches
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 4.0 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one 6 pin 15/16 Amps socket outlet on an independent board including provision of concealed opressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 2.8 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 4.0 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.
Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of rigid PVC conduit 20mm dia concealed in wall and necessary cutting and chases including conduit accessories and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit and conduit accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Switch piano, flush type single pole, one-way 5 Amp, white or ivory colour, ISI marked, complete all as specified and directed.
Switch piano, flush type single pole, two-way 5 Amp, white or ivory colour, ISI marked, complete all as specified and directed.
Switch piano, flush type single pole, one-way 15/16 Amp, white or ivory colour, ISI marked, complete all as specified and directed.
Switches, bell push, flush type, 5 amp, 230 Volts, complete all as specified and directed.
Modular switch 6 Amp, one-way, one module, 240V, fixed in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Modular switch 6 Amp, two-way, single pole, 240V, fixed in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Modular Bell push 6 Amp, one module, 240V, fixed in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Modular socket outlet, 2/3-pin, 6 Amp, flush type, 240V, 2 module, fixed in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Modular switch 16 Amp, one-way, one module, 240V, flush type, fixed in repairs, complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Modular Socket outlet, 2/3 pin, 6/16 Amps 240 Volts, flush type, 2 module, fixed in repairs, complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Modular cover plate with grid frames, 1-module, flush type, fixed in repairs, complete all as specified and directed.
Modular cover plate with grid frames, 2-module, flush type, fixed in repairs, complete all as specified and directed.
Modular cover plate with grid frames, 3-module, flush type, fixed in repairs, complete all as specified and directed.
Modular cover plate with grid frames, 4-module, flush type, fixed in repairs, complete all as specified and directed.
Modular cover plate with grid frames, 6-module, flush type, fixed in repairs, complete all as specified and directed.
Modular cover plate with grid frames, 8-module for vertical, flush type, fixed in repairs, complete all as specified and directed.
Electric bell, ding-dong type, 230V AC 50Hz, single pole, complete all as specified and directed.
Lamp holder, PVC polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed.
Socket outlet 2 in 1, 5 pin, 5A, flush type, ISI marked, complete all as specified and directed.
Socket outlet 2 in 1, 6 pin, 15/16 Amp, flush type, ISI marked, complete all as specified and directed.
Ceiling rose three terminal PVC / polycarbonate insulated body, surface bakelite type AC 50 Hz 230V, complete all as specified and directed.
Stepped (rotary) type electronic fan regulator (suitable for 1200mm / 1400mm sweep ceiling fan) flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, complete all as specified and directed. MAKE:- Havells / L&T / Legrand
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 to 32 Amps, C series, 10kA capacity, fixed in repairs, complete all as specified and directed.
MCB DB, SPN, double door, epoxy powder coated, factory made 8-way sheet metal enclosure with category of protection IP-42, 240V, with tinned copper 200Amp rated bus bar suitable for MCBs, with blank plates, fixed in repairs, complete all as specified and directed. MAKE :- Legrand / Havells / L&T / ABB
MCB SPN 6-32 Amp, 240 Volt, 'C' curve, 10KA breaking capacity, complete all as specified and directed.
MCB SP 6 - 32 Amp, 240 Volt, 'B' curve, 10KA breaking capacity, complete all as specified and directed.
Fixing only existing light fitting any type (taken down under item No. 117), complete all as specified and directed.
LED bulk head light fitting, 10W, 600 lumen, enclosed in polycarbonate body, weather proof, fixture with co-extruded polycarbonate body, environmental friendly, energy efficient, complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Cat No. ENDURA Model No. WT202W LED 6S CW PSU SI PC of Philips or Havells Cat Part No RUGBYNEONFT10WLED760SSYMBOPC or techno-commercially equivalent model in CG
LED wall mounted tube light fitting, 1x12W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Model- City 4 of Havells or techno-commercially equivalent model in Philips/ Crompton
LED ceiling mounted tube light fitting, 12W, 6000lumen, enclosed in polycarbonate body, weather proof, fixture with co-extruded polycarbonate body, environmental friendly, energy efficient, complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Havellls Model No Crown Cat Part No LHEOFJP7CUZ1W012 or techno-commercially equivalent model in CG/ Philips
LED mirror light fitting, 9W, 6000K decorative indirect up-down light fitting for mirror and wall light application with extruded polycarbonate environmental friendly energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Cat No. IVORY Model No. LHESABP7IN1W009 of Havells or techno-commercially equivalent model in Philips / Crompton
LED tube light fitting, 18W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed.
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 20mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 50mm thick RCC cover (1:2:4) mix with 8mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) If earth resistance is not found satisfactory, till satisfactory test result comes, the same shall be redone by the contractor without any extra cost to department.
Taking down existing ceiling fan / exhaust fan, any sweep, by disconnecting carefully all electric connection and refixing the same after necessary repair work as required (such as cleaning all the serviceable parts thoroughly, reassembling the fan after testing for proper functioning), with and including provision of electrical wire 3-core 23/0.0076 copper conductor, including provison of one coat of synthetic enamel paint of tint same as that of exisitng, including wiring of MES No on fan motor, complete all as specirfied and directed. NOTE : The quoted shall deemed to be inclusive of every minor items i.e., nut, bolts, screws, lugs etc., which are faily required for the smooth functioning of fans.
Vibha Enterprises
M/S JAI DURGA CONSTRUCTION
MS BHAVANA ENTERPRISES
M/s Rahul Kumar Agrawal
creative construction co.
ASHWANI BUILDERS & SUPPLIERS
M/S Garg Sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .