GE/BAS-11/2021-22

Amount

Demolition of cement concrete (unreinforced) in in ground floors and paving any thickness (below or above ground level) all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast all as specified and directed..

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each refixing in same opening all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated all as specified and directed.

M&L factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 28 to 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm thick width stuck inside in solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed.

S&F 18/19mm thick prelaminated decorative choice, printed PVC board (weight not less than 12 Kg/Sqm) duly edge bonded with 0.8mm thick PVC taping as in cupboard/kitchen cabinet shutters fitting complete all as specified and as directed by Engineer -in-Charge complete all as specified and directed.

S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane all as specified and directed.

S&F 3 mm thick frosted glass and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out old brocken glass (any thickness,size,quality or description) from wooden/steel frame or stone concrete etc. all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinted touch or galvanised wire staples all as specified and directed..

M&L for preparing for new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparing for old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden surfaces including preparation of surface all as specified and directed.

S&F in repair, Continous (piano) hinges, mild steel, bright finish or electro galvanised with width of flap (when open) 30mm all as specified and directed.

S&F in repair, Hasp and staple, safety type, aluminum anodised with mold steel hinge pin including bolt to hing plate and fixed with screw of 100 mm size complete all as specified and directed.

S&F in repair, 100mm long butt hinges extruded aluminium alloy anodised and fixed all as specified and directed.

S&F in repair, Aluminium alloy handles (ISI marked), cast type, anodised of size 150mm and fixed, complete all as specified and directed.

S&F in repair, Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

S&F in repair, 250 mm long,Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of xtruded sections or cast-aluminium alloy and fixed all as specified and directed.

S&F in repair, 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate (ISI marked) complete including all neccesary welding if required all as specified and directed.

S&F in repair, harrison rails (curtain rails), mild steel chromium plated with fixing brakes, stops, rollers etc. all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement incl taking down cement plaster on brick or concrete surfaces in any description etc incl racking out joints hacking for key scrubbing down with water etc all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement incl taking down cement plaster on brick or concrete surfaces in any description etc incl racking out joints hacking for key scrubbing down with water etc all as specified and directed.

M&L for Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement as in ceiling incl taking down cement plaster on brick or concrete surfaces in any description etc incl racking out joints hacking for key scrubbing down with water etc all as specified and directed.

M&L for two coats of cement base paint on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

M & L for Preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper (OBD) over 3mm thick wall care putty for smooth finishing and a coat of primer . Complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling all as specified and directed.

M&L for Complete removal of existing treatment of old surface of wall (plastered or unplastered) applying 3mm thick wall care putty for smooth finishing and applying one coat of oil bound distemper (OBD) with roller brush including preparation of surface, complete all as specified and directed.

M&L for Preparation of old white washed surfaces of ceiling (plastered or unplastered) and applying one coat of white wash on decorated surface, complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete including 10mm thick rendering in cement mortar 1:4, and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbished off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes and including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbished off the premises complete all as specified and directed.

M & L Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes, including Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbished off the premises complete all as specified and directed.

M&L Granite (of any type), 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade. all as specified and directed.

S&F in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. complete incl making good to floor all as specified and directed.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern), white, incl connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe, etc comlete all as specified and directed.

S&F in repair plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S&F in repair vitreous china wash hand basin oval shape coloured of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia to be fixed in M S brackets complete all as specified and directed.

S&F in repairs for 110/110 mm bore PVC (SWR) 'P' trap including jointing with solvent cement all as specified and directed..

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified and directed..

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls all as specified and directed..

S & F PVC SWR Bends in any radius 110 mm bore with access door in repair all as specified and directed..

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair all as specified and directed..

S&F PVC (SWR) Vent cowl 110 mm bore in repair all as specified and directed..

S&F PVC (SWR) Vent cowl 75 mm bore in repair all as specified and directed..

S&F, Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts including dismantling water tank of capacity exc. 250 Ltr & n.exc. 500 Ltrs and removing to store complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and directed.

S&F grating round 140mm size of PTMT (minium weight 50gms) all as specified and directed..

Supply only PVC waste pipe suitable for wash hand basin/ kitchen sink/urinal etc all as specified and directed.

S&F in repairs stop cock/Angle valve (ISI marked) cast copper alloy chromium plated with crutch or butter fly handle higher pressure screwed both ends for iron pipe or for union bore pipe of 15mm dia all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia all as specified and directed.

S&F Basin mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement, complete all as specified and directed.

S&F in repair bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size with swivel joints fixed in repairs including fixing to steel pipe or union all as specified and directed.

S&F in replacement stop valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.

S&F 15 bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Wall mixer, Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply only accessories (legs,nipple,cup etc.) for CP wall mixer/Basin mixer suitable for 15 mm dia pipe, complete all as specified and directed.

S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste coupling & waste pipe and fixed complete all as specified and directed.

Supply and fixing in repair stainless steel plate rack 600 x 600 x 230 mm deep with spoon holders , shelves, fix to wall with suitable screws, washers, nut-bolts and necessary drilling etc. Including making good to disturbed portion in cement mortar (1:4) to wall etc , complete all as specified and directed.

M&L 15 mm bore steel water tubing with screwed socket joints, medium grade galvanized with all fittings and fixing complete with clips, wall hooks etc to wall and ceiling or laid in flloor including necessary chasing and cutting in brick/concrete surfaces and making good the disturbed surfaces complete in all respect in cement mortar 1:4, including taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe from the site complete all as specified and directed.

M&L 20 mm bore steel water tubing with screwed socket joints, medium grade galvanized with all fittings and fixing complete with clips, wall hooks etc to wall and ceiling or laid in flloor including necessary chasing and cutting in brick/concrete surfaces and making good the disturded surfaces complete in all respect in cement mortar 1:4, including taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe from the site complete all as specified and directed.

M& L applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 Gde-165 complete all as specified and directed.

Welding in repairs exc 2.5cm but n. exc. 5 cm in length, thickness of metal to be welded exc,6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.

Ms Narinder Kumar Sehgal

HARI OM ENTERPRISES

Substantial Const. Co.

KAPOOR AUTOMOBILES