REPAIR and MAINT OF WOODEN DOOR STEEL DOOR WINDOW

Amount

Demolition of concrete in ground floor and pavings n'exc 15cm thickness (below above ground level) complete all as specified and as directed.

M&L for cement concrete 75mm thick type C2 1:3:6 using 40mm graded stone aggregate as in plinth protection concrete finished even and fair to receive floor finishes all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (on any type) work (table rubbed and polished ) in steps, jambs Pillars, window cills, cooking platforms and like in over and including 20mm thick cement screed 1:6 including pointing in white cemet (1:2) using marble dust wih admixture of pigment to match with shade incl rounding the edges complete all as specified and directed

M&L for green marble work 18-20mm thick (table rubbed and polished) in steps, jambs Pillars, window cills, cooking platforms and like in over and including 20mm thick cement screed 1:6 including pointing in white cemet (1:2) using marble dust wih admixture of pigment to match with shade incl rounding the edges complete all as specified and directed

Hacking out old broken glass ( any thicknes, size, qualityor description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete all as specified and directed

S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed

S&F sheet glass 5.0 to 5.5mm thick, ordinary quality fixed with necessary glazing clips and oil putty in square n exc 0.5 sqm in each panecomplete all as specified and directed

M&L in repair for droppery rod with Aluminium, tubular rail 20mm dia as in curtain rails, with fixing brackets, stops, rollers etc . Note brackets will be measured and paid seperately.

M&L for Aluminium anodised bracket powder coated or approved make for fixing droppery rod fixed in repairs.complete all as specified and as directed.

S&F in repairs second class hard wood small fittings such as brackets of any type stops/cleat for door or windows articles n exc 200 cu. Cm eachcomplete all as specified and as directed.

S&F in repairs Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repairs, Butt hinges 75mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repairs, aluminium anodized barrel tower bolts 150mm of extruded section complete all as specified and as directed.

S&F in repairs, aluminium anodized barrel tower bolts 200mm of extruded section complete all as specified and as directed.

S&F in repairs aluminium cast type handles 150mm complete.

S&F in repairs 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete.

S&F in repairs floor door stopper of aluminum alloy body 140mm complete all as specified and as directed.

S&F in repairs cast iron or MS Fanlight pivot with plate size 25mm x65mm and suitable for shutter of 30mm thickness and fixed complete all as specified and as directed.

S&F in repairs GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples complete all as specified and as directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs 300mm, MS ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 100mm size brass mortice lock, vertical type, 4 lever incl plates and two keys , incl cutting holes into existing pressed steel/wooden frame etc complete all as specified and as directed.

S&F in repars Alluminium (Extruded section ) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

M & L for taking down wooden shutters of any description exc 1.0 sqm and n exc 2.0 sqm and refixing in the same opening after easing and adjusting and necessary repairs complete all as specified and as directed.

M & L for taking down wooden shutters of any description exc 1.0 sqm and n exc 2.0 sqm and removing to store complete all as specified and as directed.

Taking down chowkhats or frames with shutters of size n exc. 1.5 Sqm and removing to store (without taking off shutters from the frames) complete all as specified and as directed.

Dismantling fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F 35mm thick Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.complete all as specified and as directed.

S&F 2nd class hard wood, 35mm thk glazed/ skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/guaze etc edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass/ guaze.complete. Note : glazing/gauzing will be measured seperately

S&F Steel door including projecting type hinges, steel handle, complete, with or without glazing bars, dovetailed or welded complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, so as to cover the screws of both the panels, using solvent cement. 90 degree heat bent strips of 5mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints/pillars etc Note :PVC strips shall be measured seperately.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. complete all as specified and directed.

M&L second class soft wood plain fillets.square, rectangular or triangular in section, clean sawn, sectional area exc 13 sq cm and n exc 25 sq cm secured with nails complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

M&L for repairs to existing boarding as in cupboard shelves, pelmet boxes cabinets, drawers and partitions and the like by taking down and refixing/resecuring with screws, hinges, in the same position including making good the surface complete all as specified and directed.

M&L in repairs for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with one side decorative choice faces and other side with white ; fixed with screws to timber frame work including PVC tap etc complete all as specified and directed.

M&L preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete..

S&F aluminium anodized barrel tower bolts 200mm of extruded section complete all as specified and directed.

S&F aluminium anodized cast type handles 150mm long complete all as specified and directed.

S&F 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and directed.

S&F floor door stopper of aluminum alloy body 140mm complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 150mm of extruded section complete all as specified and directed.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F GI wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with screws or GI staples complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilarors, partitions section size 80x40x4mm complete all as specified and directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron)door shutters, aliuminium section weighing 0..55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2Nos in each door, hinges anodised aluminium snap bedding screws etc complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick Square/rectangular) area of each tile exc 0.11sqm and nexc .18 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match incl screed bed with CM (1:6) 20mm thick for laying floor tiles complete all as specified and directed.

M&L coloured glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in CM (1:6) on brick or concrete surfaces complete all as specified and directed.

M&L Chequered cement concrete tiles with grey cement and pigment of size 20cm x 20cm x 25mm thick set and jointed in neat cement slurry in floors complete all as specified and as directed

M&L screed bed or bedding layer of mortar 20mm thick using CM 1:6 for laying floor finishes complete all as specified and as directed

M&L for preparation of new steel surfaces and iron work over 10cm in width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete.

Demolition of stone, brick/PCC block masonry work built in cement mortar complete all as directed.

M&L for pre-cast cement concrete block masonry with solid bricks with PCC 1:3:6 type C1 using 20mm graded stone aggregate exc 10cm width and setting in CM 1:6 Complete all as specified and as directed.

M&L Rendering 15mm thick CM (1:4) on other than fair faces of brick work or concrete surfaces of wall , finshing the surface even and smooth without using extra cement complete.

M&L Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces of cement finshed even and smooth without using extra cement complete.

M&L for preparation of newly plastered surface and applying two coats of oil emulsion distemper over a coat of primer complete.

M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete with glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer complete all as specified and directed.

S&F steel window/ventilators with side hung shutters incl box type hinges, with steel handle and steel peg stay complete without glazing bars, dovetailed or welded incl painting with one shop coat of red oxide primer complete all as specified and directed.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and directed.

M&L running welding in repairs , thickness of Metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed.

M&L preparation of old decorated surfaces of wall and applying one coat of white washcomplete all as specified and directed.

All as per item here in before but on ceiling complete all as specified and directed.

M&L preparation of old decorated surfaces of wall including cornices and applying one coat of oil emulsion distemper complete all as specified and directed.

All as per item here in before but on ceiling complete all as specified and directed.

M&L preparation of old decorated surfaces of wall including cornices and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces and wood based material over 10cm in width or girth of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces and iron work over 10cm in width or girth of any description and applying one coat of synthetic enamel paint in camouflage pattern complete all as specified and directed.

M&L French polishing one or more coat on old work surfaces of any description width or girth including cleaning and preparing the surface complete all as directed.

Taking down cement plaster on brick or stone walls or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for prep of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of walls, chajjas, facia, column and roof projections and applying two or more coat s of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for 6mm thick (No of ply 5 Nos) Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

M&L for cover fillets of tempered hard board 6mm thick, 40mm wide fixing with screws in ceiling, flat or sloping complete all as specified and as directed

M/S L G BUILDERS (BID ID -3464752)

DEOGRATIES SEMPER AMA ASSOCIATE (BID ID -3464762)

M/S N T ENTERPRISES (BID ID -3464785)

M/S ACE BUILDERS (BID ID -3464810)

M/S KESANG CONSTRUCTION (BID ID -3464839)

M/S KEWAN INDIA (BID ID -3464855)

M/S RHEGON CONSTRUCTION (BID ID -3465072)