SPECIAL REPAIRS TO INTERLOCKING PAVER BLOCK AT REAR MARSHALLING AREA IN FRONT OF DGNCC GATE AND BEHIND CAMP BARRACKS IN THE AREA OF AGE BR III UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition of cement concrete, unreinforced, of any type and in any position, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2 Sqm each and removing from site, complete all as specified and as directed.

Scarifying or picking gravelled macadam or bituminous macadam surface exceeding 50mm thick but not exceeding 100mm thickness complete including removing and stacking of materials upto 50mtr distance, complete all as specified and as directed.

Hard core of gauge not exceeding 63mm stone aggregate, deposited, spread and levelled in layers not exceeding 15 cm thick watering and ramming to a true surface, complete all as specified and directed

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

Aluminum alloy powder coated (50 micron) anodized door frame of section 100mm x 44mm x 2mm thick, door shutter of aluminum section of size 85mm x 44mm x 2mm thick, top rail and both stylesof size 100mm x 44mm x 2mm thick,lock rail and bottom rail of size 115mm x 44mm x mm thick including aluminum anodized snap beading and rubber packing,& 5.5mm thick frosted designer glass (as approved by GE), duly fitted with 100mm long aluminum butt hinges- 04 Nos. to each leaf, 200mm size aluminium tower bolt, 200mm long fancy type Aluminium handle- 02 Nos on each leaf, 4 lever brass 100 mm size mortice lock, & double action floor door spring heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and directed.

Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including taking down corrugated steel sheeting of any gauge and thickness in roofing coverings, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, including taking down plain steel sheeting of any gauge and thickness in roofing coverings, complete all as specified and as directed.complete all as specified and as directed.

False ceiling with 4mm thick desiner 'E' Board of size 595mm x 595mm (Make:Everest Ltd or Charminar) fixed over snap grid of GI powder coated inverted Tee or 'L' section suspended from ceiling with butterfly clip & hold down clip or 2-3 mm thick GI wire tie with ceiling/trusses/purlins etc with suitable arrangement(at any height) including taking down old ceiling board any type and any size, complete all as specified and as directed. (a) Main runner/ Cross tee size 29mm x 24.7mm x 0.8mm. (b) Wall angle of size 22.2mm x 22.2mm x 0.65mm. (c) Size of grid 600mm x 600mm. (d) Two coats oil bound distemper one side of board. (e) Powder coating on exposed side of tee/angle.

25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

Vitrified coloured ceramic tiles dark shade 10mm thick (square/rectangular) polished, area of tiles exceeding 0.18Sqm but not exceeding 0.36Sqm each tile in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Preparation of old treated plastered or unplastered surfaces of walls by brooming down or scraping with steel wire brushes to remove smoke, soot, moulds, moss, efflorescence and treading oil and greasy spots, filling in cracks, holes with putty and applying one coat of interior acrylic emulsion distemper, complete all as specified and as directed.

Preparation of old treated plastered or unplastered surfaces of walls by brooming down or scraping with steel wire brushes to remove smoke, soot, moulds, moss, efflorescence and treading oil and greasy spots, filling in cracks, holes with putty and applying one coat of exterior weather shield acrylic emulsion paint, complete all as specified and as directed.

100mm thick factory made chamfered edge cement concrete paver block of M-35 grade of approved size/ shape, colour, design & pattern as in footpath, parks, lawns, drive ways or etc., made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. and as directed.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

A R construction

LAXMI GROUP

Bidder Name

SHRI RAM CONSTRUCTION CO