Transportation, installation, necessary fabrication, commissioning, trial run including extension of one no. 1000mm width, 1x90kW, 550V, single drive belt conveyor along 84L from 5D to 14D for development of Panel-8 in R-VIIA seam at 3n4 Incline JPC

Amount

PART A. Transportation & installation of one no. 1000 mm width, 1x90kW, 550V, single drive belt conveyor for a length of 103.5 mtr. from 84L/5D to 84L/8D in R-VIIA seam at 3&4 Incline, J.P.Colly.

Transportation of the 1000 mm width, 1x90kW, 550V Drive Head complete including gear box, motor (90kW/550V), couplings, bearing blocks, fencing etc. from surface and installation at 84L/6D (R-VIIA) with necessary fabrication job

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc. from surface and installation at 84L/5D (R-VIIA) with necessary fabrication job

Transportation of Loop Take Up Unit complete with motorized winch from surface and installation at 84L/6D-7D (R-VIIA) with necessary fabrication job

Transportation of Tail End Unit complete with fencing from surface and installation at 84L/8D (R-VIIA) with necessary fabrication job

Transportation of 103.5 mtr. 1000 mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from surface to 84L belt installation site and installation from 84L/5D to 84L/8D in R-VIIA seam

Loading, transportation and unloading of one ACB (550V/200A), starter (550V/90kW), LS unit from surface to 83L/6D (R-VIIA) with help of haulages & 30 mtr. manually

Transportation of 250 mtr. 3.3kV grade 70 sq.mm. PVCDWA cable from surface to 79L/3D (R-VIIA) with help of haulages and Laying-hanging this cable from 79L/3D TSU to 83L/6D ACB manually

Transportation of 230 mtr. 1000 mm width PVC belting from surface to 84L belt installation site with help of haulages & 30 mtr. manually

Laying, lapping, jointing & tensioning of this 230 mtr. 1000 mm width PVC belting in proposed 84L belt

Transportation of 150 mtr belt sequence cable from surafce to 83L/6D (R-VIIA); then laying-placing them from 80L/5D starter to 83L/6D starter in R-VIIA seam

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3' MS Bolt-nut) from suarfce to 84L belt installation site with help of haulages for 103.5 mtr. belt and laying-placing them from 84L/5D to 84L/8D in R-VIIA seam

Testing, trial run, alignment & commissioning of this belt conveyor from 84L/5D to 84L/8D in R-VIIA seam

Fabrication of Drive Head base frame, Gear box base frame, Motor base frame, Loop take up unit base frame and Movable trolley for loop take up unit with tensioning arrangement

Supply of DA cylinder

Supply of Oxygen cylinder

Supply of MS Nut&Bolt of 5/8" X 2"

Supply of HT Nut&Bolt of M20 X 75mm

Supply of 40 Nos. HT Nut&Bolt of M20 X 65mm

Supply of MS Nut Bolt of 5/8" X 2"

Supply of HT Nut&Bolt of M30 X 140mm

Supply of HT Nut & Belt of M24 X 150mm

PART B Five times extension of proposed 84L belt conveyor from 84L/8D to 84L/13D length of 172.5 m in RVIIA seam od 3&4 incline unit ,JPC

Six times dismantling of tail end unit complete for six times belt extension of proposed 84L belt

Six times transportation and installation of tail end unit complete for six times belt extension of proposed 84L belt from 84L/8D (R-VIIA) to 84L/14D (R-VIIA)

Transportation of 1000mm belt structures (ie. foot stools, channels, brackets, top and bottom rollers etc.) for a length of 207 mtr. from surface to belt extension site by haulages and installation them from 84L/8D to 84L/14D in R-VIIA seam during six times belt extension (each time belt extension will be for a length of 34.5 mtr.)

Transportation of 414 mtr. 1000mm PVC belting from surface through haulages & 30 mtr. manually to 84L belt exterision site

Laying, Lapping, Jointing & Tensioning of this 414 mtr. 1000mm belting from 84L/8D to 84L/14D in R-VILA seam during six times belt extension and trial run

Transportation of pull cords with its cable, communication devices with its cable,signalling system for 207 mtr. belt from surface to 84L belt extension site and laying & fitting them during six times belt extension

Supply of MS Nut Bolt of 5/8" X 2"

Part C- Civil foundation works for installation of 1X90kW, 550V, 1000mm wide belt conveyer drive head, discharge unit, loop take-up unit and platform for ACB, Starter for 84L belt conveyor of 3&4 incline, JPC.

Recess cutting in stone

Muck & debris cleaning de disposal up to 15.0 M

Supplying and filling in plinth with sand under floors, including watering, camming, consolidating and sleeming complete

Brick work with Fly ash bricks of class design 75 Analysed in foundation and plinth by CM 16 (1 cement: 6 Course sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to pinth level 1:2:4 (1 cement:2 coarse sand(zone-III):4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster of mix 1:6 (1.cement : 6 fine sand)

Loading of materials into tub, lowering & unloading at site

Part D Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for installation of proposed 84L. belt conveyor in R-VIIA seam of 3&4 incline under JPC

Roof heightening by drilling, blasting in stone including dressing. Cleaning with cost of drill rod and drill bit. (Excluding cost of explosive & detonator).

Roof bolting including carrying of materials from surface to u/g side, drilling, grouting & cost of drill rod and drill bit.

Total impact of GST for the purpose of CTC

RINA ENTERPRISE

BABLU SINHA