ADDN ALTN TO ARJUN BLOCK OF OFFICER MESS AND SPECIAL REPAIR TO INTERNAL WIRING AND CONNECTED FITTINGS AND FIXTURES FOR OFFICERS LIVING IN ACCN AT AF STATION GWALIOR

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

Demolition of concrete (un-reinforced)of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.

M&L, for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm gradred stone aggregate as in levelling course finished even and fair etc all as speciifed

M&L for non skid, coloured ceramic tiles 7-8 mm thick of approved colour (square/rectangular) area of each tiles exc 0.11 but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of coloured tiles over & includind 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed

M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

M&L for 10mm thick Glazed Vitrified ceramic tiles, light shade (square/rectangular), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15mm thick in CM (1:4) for laying floor finishes, area of each tile not exc 0.36 Sqm complete all as specified and directed.

M&L for 10mm thick Glazed Vitrified ceramic tiles, light shade (square/rectangular), on vertical surfaces such as dado/skirting etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) for laying floor finishes, area of each tile not exc 0.36 Sqm complete all as specified and directed.

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removal of surplus spoil to a distance exc. 500 Mtr but not exc 1.50 KM and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

S&F in repair of vitreous china wash down water closet pan wall hung snow white with extened P trap including vitreous china flush cistern with twin flush and seat cover connection to drain flush pipe and anti syphonage pipe complete all as specified. [Make CERA cat Part No -2035 (CLAIR) for EWC wall hung , cat Part No - 2115,2235 for flush cistern and cat Part No - 2315 for seat cover or Hindware/Parryware as approved by GE

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass mixer fancy type and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair toubler towel rail 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified and directed.

S&F Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and, complete all as specified and as directed.

S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repair Brass chromium plated health faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed

S&F in repair fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down suitable for 15 mm bore GI pipe complete all as specified and directed. Make: Marc/ Jaquar/Hindware

S&F in repair chromium plated hand shower with flexible pipe not less than 1 Mtr long suitable for 15 mm bore GI pipe complete all as speciifed and directed.

S&F in repair brass Chromium Plated soap dish complete all as specified and directed.

S&F in repair stainless steel grating 100 mm dia doom type with waste hole fixed in cement complete all as specified and directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. Make: Jaquar/Marc/Plumber

S&F in repair 15 mm bore 2-way bib cock with flange etc all as specified and directed. (Make- Jaquar Alive/Aira-CHR-85041, Plumber, Marc.)

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4.0 Sqm each.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

S&F factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated as spd and directed.

S&F for factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified.

S & F butt hinges medium weight stainless steel and fixed 100 mm size complete all as specified and directed.

S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long.

S&F aluminum handles cast type anodized 150 mm size.

S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

Supply and fixing frosted Sheet Glass, 4.80 mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Window, Ventilator Shutters, complete all as specified and as directed.

Supply and fixing figured Glass 4.0mm thick, Square or Rectagular, area not exc. 0.50 Sqm in Each Pane and fixing to Aluminium Window, Ventilator Shutters, complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.

M&L for brick work with old size full brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick plaster on fair faces of concrete surfce in CM (1:3) as in ceiling finished even and smooth without using extra cement as in ceiling complete all as specified and as directed

M & L for rendering 15 mm thick on fair faces of brick wall with mixing WPC as per manufacture direction by eight of cement finished fair & even in CM 1:4 complete all as specified and directed. Note: WPC shall be measured and paid separately under respective item of BOQ

M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a thin layer of wall care putty and primer , complete all as specified and directed.

M & L three coats of white washing on ceiling of new plastered surface icluding preparing surfaces, complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of exterior weather paint over a coat of wall care putty and primer , complete all as specified and directed.

Supply only Integral Water Proofing Compound, conforming to IS-2465-1975 and/or as approved, complete all as specified.

S&F in repair coloured powder coated 25 mm dia aluminium drapery rod with support, of coloured powder coated aluminium decorative type design and patteren as approved by GE complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of walls and applying 1mm thick wall care putty including suitable primer to obtain the desired/true surfaces and applying two coats oil emulsion distemper on putty prepared surfaces / old decorated surfaces as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of ceiling including cornices surfaces by brooming down or steel wire brushing to remove of dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and efflorescent salts and treating out greasy spots and applying two coat of white wash complete all as specified and as directed.

S&F in repair gunmetal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore complete all as specified and directed.

Supply and fixing of steel door spring of size 200mm in wooden/steel frame by welding or screwing which ever is appropriate for fixing in frame complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

All as per item No 55 above but 20mm bore.

S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

All as per item No 57 above but 20mm bore.

M&L for cast iron floor trap with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1, of 75mm outer dia complete all as specified & directed.

S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/trenches (75 mm bore) etc complete all as specified and directe.

S&F, 75 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) single T and fixed with adhesive

S&F, PVC (SWR) 110 mm bore vent cowl

S&F, PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ walls (110 mm bore)etc, all as specification

S&F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded aggregate) in filling as in hold fasts and likes etc., complete all as specified and as directed.

S&F in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make cup board shutters, including demolition of existing cup board shutter complete all as specified and directed. Make :- Rajshree/Plastro green

S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make cup board shutters, including demolition of existing cup board shutter complete all as specified and directed. Make :- Rajshree/Plastro green

S & F continuous (Piano) hinges, mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F 125 mm size aluminium, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repairs Magnet catch for kitchen cabinet shutters as per approved sample complete all as specified and directed.

S & F colour powder coated aluminium frame and shutters for door windows ventilators with one or more rebates or aluminium section of two or more traccks incase sliding windows including jointing cleat for fixing (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed.

S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80 mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specified and as directed

M&L for salt glazed stone ware (SGSW) pipe conforming to IS, laid in trenches and jointed in CM (1:1) of 150 bore of pipe complete all as specified and directed.

M&L concrete bed to pipes in PCC (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150mm bore sewer pipe line complete all as specified and directed.

Demolition of RCC of any description and in any position complete all as specified and directed.

M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for pre cast RCC as in cover salb using cement concrete 1:1.5:3 Mix, Type A1 (Using 20 mm graded stone aggregate) set in CM 1:4 including necessary form work complete all as speified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top),double layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

Taking down carefully existing unserviceable aluminum point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor cable FR, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade) of suitable size not less then 20mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor cable FR single core. PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ (Make of Cable/wire:- : Havells /Polycab/Grandlay Make of PVC Conduit:-Finolex/Jindal/AKG/AG, Make of Laminated Sheet:-Hylam/National)

Description all as per item No 82 here-in-before but point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

Description all as per item No 82 here-in-before but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

Description all as per item No 82 here-in-before but point wiring for one 5 pin socket outlet, 5/6 Amps on same board with other switch.

Description all as per item No 82 here-in-before but point wiring for two way switch.

Description all as per item No 82 here-in-before but point wiring for one six pin socket outlet, 15/5 Amps (independent board) controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor.

M & L for switch flush type single pole one way 5 Amps, 240 volts, white/ ivory finish complete all as specified. (Make :- Anchor(Panta)/ Cona/ Leader)

M&L for socket outlet 2 in 1, 5 pin, 6 Amps, 240 volts flush type white ivory finish complete all as specified.Make :- Cona/Anchor/Havells

S&F switch socket combination multi purpose, 5 Pin 6 amps, 240 volts flush typeWith Indicator complete all as specified and directed.Make:-Cona/Leader/ Anchor(Panta).

S&F for switch socket combination multi purpose, 6 Pin 6/16 amps, flush type with Indicator complete all as specified and directed. Make:-Cat part No 2711 of cona or equivalent of Leader/ Anchor(Panta).

M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

Supplying & fixing for switch bell push, flush type, 5 Amps, single pole, one way , 230 volts AC circuit white ivory finish complete all as specified & directed. (Make : Cona/Anchor/Havells)

Supply and fixing bell Ding Dong, AC 230 V.single pole complete all as specified and directed. Make:-Cona/Anchor/Havells.

Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt . (Size of PT switch ) Make:-Bajaj/Anchor/Havells

Supply & Fix for decorative slim linear LED tube light fitting, Batten Type, 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified. Make-Havells / Bajaj/ Philips

S&F LED mirror light batten type complete with high output diffuser 2 Feet 10 Watt 220 V AC decorative type complete all as specified and directed. Make: Havells/ CG/Philips

Dismantling & Taking out MCB DBs VTPN any size , any type and capacity complete all as specified and directed.

S&F for sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires. Complete all as specified. (Make: ABB,Schneider,Legrand, havells)

Supply and fixing factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one TPN-MCCB 100 /125 Amps as incomer and 12 SP MCBs (or any combination of SP/TP MCBs )outgoings including taking out the same complete all as specified & directed. Make:-Legrand /ABB/Schneider/ Havells

Dismantling & Taking out MCB's/ Isolatotrs and metal clade box of any size complete all as specified and directed.

S&F for MCB single pole 6 to 32 Amps, "B" Curve, 10KA ,240 Volts complete all as specified (Make:Legrand/ABB/Schneider/Havells)

S&F for MCB Single pole and neutral 40 to 63 Amps 10 KA, 'B' series, 240 Volts complete all as specified. (Make:Legrand/ABB/Schneider/Havells )

Supplying & fixing MCCB, 3 pole, 125 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 conforming to IEC-609472 & IS-139473 to be fixed in distribution board, complete all as specified & directed. Make :-Legrand/ABB/Schneider

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiring with any type of conduit. Make of Cable/wire:- : Havells /Polycab/Grandlay Make of PVC Conduit:-Finolex/Jindal/AKG/AG

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiring with any type of conduit. Make of Cable/wire:- : Havells /Polycab/Grandlay Make of PVC Conduit:-Finolex/Jindal/AKG/AG

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers all as specified. (Make:ABB/Schneider/Legrand)

Taking down carefully ceiling fan/exhaust fan including electric connection complete from site and removing to MES store yard and re-fixing the same in existing position after civil work with twin core twisted flexible copper conductor cable with suitable size including cleaning, greasing / oiling and painting with two coats of synthetic enamelled paint complete all as specified and directed.

Taking down carefully Water heater (Geyser,s) any capicity any size and disconnecting all electric conection including hot & cold PVC water connection and refixing the same and connecting electric & water connection after the civil work complete all as specified and directed.

S&F of exhaust fan steel body AC single phase 230 Volts of size 300 mm sweep with blades, frames and louvers complete all as specified and directed.

S&F single phase electronic energy meter in polycarbonate sheet body with counter display in class 1.0, 50Hz, 240 Volt AC, ISI marked energy meter of capacity 10 Amp to 60 Amps complete all as specified and directed. Make: L&T/ HPL/ Havells

S&F electric water heater, storage type of capacity 25 Litre, steel body with copper inner tank, with heating element 2KW and 5 Star BEE rating complete with all accessories such as safety valve, thermostate, NRC, PVC connections of required size complete all as specified and directed. Make: Racold/ Havells / Bajaj

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed. Note: Earth strip and protection pipe upto and including 7.5m deemed included in unit rate quoted by the contractor.

S&F switch modular single pole one way 6 Amps, 240 volts, 1 Module complete all as specified. (Make :- Anchor/ Cona/ Leader)

S&F switch modular two way 6 Amps, 240 volts, 1 Module complete all as specified. (Make :- Anchor/ Cona/ Leader)

S&F modular bell push 6 Amps, 240 volts, 1 Module complete all as specified. (Make :- Anchor/ Cona/ Leader)

S&F Modular socket outlet 6 Amps, 2/3 Pin combined 2 Module complete all as specified.Make :- Cona/Anchor/Havells

S&F modular switch socket combination, 6A-2/3 Pin combined, 2 module complete all as specified and directed.Make:-Cona/Leader/ Anchor(Panta).

S&F modular switch socket combination, 16A-6 Pin,3 module complete all as specified and directed.Make:-Cona/Leader/ Anchor(Panta).

Supply and Fixing step type modular electronic fan regulator single phase ,230 volt, 120 watt, 2 Module complete all as specified and directed. Make:-Cona/Anchor/Havells

S& F for Street light fittings LED 35Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washer. Complete all as specified. ( Make :Havells/ Bajaj/ Philips)

Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 35 Sqmm, 3.5 Core, 1100 volts grade ISI marked ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed. Make : Havells Cable/Gloster/Polycab

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Supply and lay for sand filling with clean dry find sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed. NOTE:- For measurement purpose punned thickness shall be considered as per clause 19.75 of SSR Part-I

Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed.

Supplying, laying & jointing GI water tubing, 50 mm bore, light grade ISI marked as in sleeving etc. laid in trenches / ducts / horizontal bore hole complete all as specified and directed. (MAKE : TATA/JINDAL/TT SWASTIK).

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

RAVINDRA SALES

M/S YOGANSH CONSTRUCTION CO.

KISHAN CONSTRUCTION COMPANY