8579 COMPREHENSIVE REPAIR UNDER AGE BR III OF GE SOUTH PUNE

Amount

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut cudappah stone slab 20-25mm thick, laid over and including 15mm thick screed bed in CM 1:6, jointed in grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing and polishing etc, including demolition of existing stone slab and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

M&L 18-20 mm thick machine cut kota stone slab, single piece as in steps, riser, dado or skirting etc and other similar work laid over and including 10mm thick screed bed in CM 1:4, set and jointed with grey neat cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc including demolition and demolition of existing stone slab and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

M&L for cutting grooves on stone slabs such as in steps and other similar situations complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, including demolition of existing cement concrete of any description n. exc. 15 cm thick and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:2:4 type B-0, 25mm thickness, levelling course as in padding concrete including demolition of existing cement concrete of any description in floors and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) including demolition of old existing plinth protection of any description and removing of debries etc outside MD land complete all as specified and directed.

M&L for fly ash brick masonry with solid bricks straight or curved on plan exc. 6.0m mean radius built in mortar 1:6 including demolition of old existing brick work or stone boulders or PCC block masonary built in cement mortar complete all as specified and directed.

M&L for half brick thick fly ash brick wall straight or curved on plan exc 6.0m mean radius built in CM 1:4 including dismantling of old existing brick work complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:6 on brick / concrete surfaces as on walls finished even and smooth without using extra cement including taking down of old existing cement plaster from brick / block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for coloured glazed ceramic designer tiles as on vertical surface, 600x 300x 7mm thick size, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:4 including dismantling of old existing wall tiling of any type including cement mortar bedding and removing of debries etc outside MD land complete all as specified and directed.

M&L for vitrified tiles, double charged, 10 mm thick (square/ rectangular) polished, of 600x1200mm size, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 20 mm thick screed bed in cm 1:6 including dismantling of old existing floor, hearth etc of any type including cement mortar bedding and removing of debries etc outside MD land complete all as specified and directed.

M&L for chequered cement concrete tile 300x300x25mm thick size, glossy finish / rubber moulded set and jointed in neat cement slurry and ponted in grey cement & pigment, laid over and including 20 mm thick screed bed in CM 1:6 including dismantling of old existing tiling / floor hearth of any type including cement mortar bedding and removing of debries etc outside MD land complete all as specified and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

S & F 105 mm X 60 mm size pressed steel frames made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges-03 Nos, lock strike plate etc including one shop coat of red oxide primer including filling of PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate in hollow portion complete all as specified and as directed.

S & F 125 mm X 60 mm size pressed steel frames made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges-06 Nos, lock strike plate etc including one shop coat of red oxide primer including filling of PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate in hollow portion complete all as specified and as directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain coloured flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Mild steel hold fast / lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Taking down door shutter not exc 1.0 sqm each any description and re-fixing in same opening after resecuring or easing and adjustment and also re-fixing builders hardware etc complete all as specified and directed.

Taking down door shutter exc. 1.0 sqm but not exc. 2.0 sqm each any description and re-fixing in same opening after resecuring or easing and adjustment and also re-fixing builders hardware etc complete all as specified and directed.

M&L for easing and adjustment of door shutters, not exc 1.0 sqm each and re-fixing of builders hardware without taking off shutters complete all as specified and directed.

M&L for easing and adjustment of door shutters, exc. 1.0 sqm but n. exc. 2.0 Sqm each and re-fixing of builders hardware without taking off shutters complete all as specified and directed.

S & F 2nd class hardwood glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc complete all as specified and directed

M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws etc including taking down of old unserviceable frame work etc complete all as specified and drawings as provided by Engineer-in-Charge

M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming toIS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass/ stainless steel screws etcincluding taking down of old unserviceable frame work etc complete all as specified and drawings as provided by Engineer-in-Charge

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clips with steel frames including hackingout of existing broken glass complete all as specified and directed

S&F sheet glass 4 mm thick frosted ordinary quality and glazing with oil putty or glazing pins / spring clips with steel frams complete all as specified and directed

S&F sheet glass 4 mm thick figured or pin head glass as in louvers of ventilators complete all as specified and directed

S&F in repairs stainless steel, made from 304 grade steel sheet kitchen Plate / dish Rack of size 36 inch x 39 inch wall mounted type fixed to wall with screws & royal plug etc complete all as directed.

S&F stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F mild steel framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders: framed balusters, wall ways, railings, frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 including dismantling of old existing unserviceable framed work complete all as specified and directed.

S&F aluminium anodised grill of approved design & pattern with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including dismantling of old existing unserviceable grill and removal from the site complete all as specified and directed.

S&F in repairs 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides including taking down of old existing unserviceable shutters, complete all as specified and directed.

S&F in repairs 25mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides including taking down of old existing unserviceable shutters, complete all as specified and directed.

S&F in repairs 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including second class hardwood beads of suitable size including dismantling of old existing unserviceable partition / shelves or shutters etc complete all as specified and directed.

S & F Continuous (piano) hinges of 20 mm flap width, Stainless Steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repairs 2nd class hardwood Plain fillets sectional area exc. 6.0 sqcm and n. exc. 13 sqcm , square, rectangular or triangular in section, wrought, secured with screws complete all as specified and directed.

S&F in repairs 2nd class hardwood plain fillets n. exc. 3 sqcm in section, square, rectangular or triangular in section, wrought, secured with screws to partcale board as leaping complete all as specified and directed.

S&F in repairs mild steel 300mm size, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F butt hinge, medium weight, cold rolled mild steel 100mm long complete all as specified and as directed.

S&F stainless steel butt hinge, medium weight, cold rolled, 100mm long complete all as specified and as directed.

S&F aluminium anodised extruded section hinges 75mm long complete all as specified and as directed.

S&F aluminium anodised extruded section hinges 100mm long complete all as specified and as directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F in repairs 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and as directed.

S&F aluminium anodised barred tower bolt of extruded section 200 mm long and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F hasp & staple 75mm size, aluminium anodised with mild steel hinge pin, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

S&F in repairs hasp & staple 75mm size, aluminium anodised with mild steel hinge pin, aluminium anodised, including bolt to hing plate and fixed with screws, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc. 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

M&L for preparing of old painted surfaces of steel over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamal paint complete all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm all as specified and as directed.

S&F in repairs mild steel rolling shutters (Drawing as provided by Engr-in-charge) thickness of latchs 1.25mm with out ball bearing , but gear operated type with bevel gear box and crank handle as specified including top cover, an choring rod ,hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box size 0.15x0.12 cm and crank handel including dismantling of existing unserviceable rolling shutter complete all as spcified and directed .

S&F safety lever locks, mild steel with 4 levers suitable for rolling shutters complete all as specified and directed.

S&F in repairs mild steel collapsible steel gates (Drawing as provided by Engr-in-charge), consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, including dismantling of existing unserviceable shutter complete all as spcified and directed

M&L for for welding in repairs n. exc. 2.5cm in length and n. exc. 6mm thick complete all as specified and directed by Engr-in-charge.

S&F in repairs 25mm dia harrison curtain rails (Medium weight) mild steel chromium plated including with fixing brackets, stops, roller etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in bed blocks, grills, bands, copings kerbs etc including necessary formwork etc complete all as specified and as directed.

S&F in repairs 12mm thick prelaminated board, both side decorative, fixed in position complete all as specified and directed.

S&F 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S&F in repairs roller blinds of powder coated aluminium strips roller pull stringe and brackets of approved design and shades including necessary accessories complete all as specified and directed by Engr-in Charge.

S&F mild steel framed work for doors or gate of angle, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, incl necessary welding etc of grade Fe-410-w(Gde-E-250 quality B) including dismantling of old unserviceable frames including doors or wrought iron work of any description and any position complete all as specified and directed.

M&L for resecuring or easing & adjusting of shutters including taking down & re-fixing in same opening exc. 1.0 sqm and n. exc. 2.0 sqm each including S&F of new hinges (Any number of hinges required at site) by means of welding or screwing to door frame complete all as specified and directed by Engr-in-charge.

M&L for 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F in repairs anodised aluminium snap grid frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including dismantling and removal of existing unserviceable ceiling and boards complete all as specified and directed.

S&F in repairs 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F in repairs 3mm thick Aluminium Composite Panel (ACP) exterior grade (skin thickness 0.25mm) including aluminium anodised frame work of AA 300/5000 series with one core of material of virgin LDPE and coating of kynar 500 resin based PVDF coating (mettallic colour) with joint filling silicon weather proofing any colour complete all as specified and as directed.

M&L for removal of air lock / blockage of water in GI tubing 15mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and re-fixing the same in position complete all as directed by Engr-in-charge Note:- Removing 01 air lock / blockage from pipe line and make it functional shall be measured as one Job.

M&L for removal of air lock / blockage of water in GI tubing 20mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and re-fixing the same in position complete all as directed by Engr-in-charge Note:- Removing 01 air lock / blockage from pipe line and make it functional shall be measured as one Job.

S&F in repairs 20 mm ball brass valve high pressure with polythene float and flynut, screwed down to iron pipe complete all as specified and directed

S&F in repairs 15mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 20mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 25mm bore GI pipe "medium grade" (concealed) including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms), complete all as specified and directed.

Cleaning & removing of blockage from rain water pipe by removing the Cl grating & roding etc and re-fixing the same in position after cleaning of pipe, set in cement mortar 1:6, complete all as directed by Engr-in-charge. Note:- Removing of one blockage and make it functional will be measured as one Job.

S&F in repairs PVC connection pipe 450mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs PVC connection pipe 600mm long with 2 Nos. brass check nuts suitable for 15mm bore of pipe with washer etc. complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 20mm bore complete all as specified and directed.

S&F in repairs 15mm bore stop valves, cast copper alloy, chromium plated, fancy type, concealed, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs brass spindle long leg 4 & 5 No. suitable for concealed stop cock 15mm bore size, complete all as specified and directed.

S&F in repairs angle valve cost copper alloy, chromium plated screw down high pressure with crutch handle screwed both ends suitable for iron pipe of 20mm bore, complete all as specified and directed.

S&F in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs PTMT waste fitting 32/40mm bore suitable for WHB / sink complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated 32mm dia suitable for WHB, complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 38/40 mm dia suitable for sink, complete all as specified and directed.

S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs 500 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed. Note : The cost of scaffolding & security measures etc. shall be deemed to be included in unit quoted rates as the work is to be carried out on elevated height upto 12 mtr height building.

S&F in repairs 1000 litre capacity of rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked of make specified, two layered construction hoisted and fixed in position with and including brass tank nipple of suitable size, PTMT ball valve, float with aluminium rod etc complete including taking down of existing unserviceable tank complete all as specified and directed. Note : The cost of scaffolding & security measures etc. shall be deemed to be included in unit quoted rates as the work is to be carried out on elevated height upto 12 mtr height building.

S&F in repair Gun-metal globe or gate valves of 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves for 40mm dia pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs flush handle PVC with adjustable Lever and hook suitable for low level flushing cistern complete all as directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia of suitable length, suitable for low level cistern including jointing to WC complete all as specified and directed.

S&F in repairs 32mm bore, 750mm long PVC waste pipe suitable for WHB complete all as specified and direcetd.

S&F in repairs 38/40 mm bore and 75 cm long PVC/waste pipe suitable for sink complete all as specified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs mild steel chromium plated hinging device suitable for EWC PVC seat cover complete all as specified and directed by Engr-in-Charge.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white including with intergral foot rest with 'P' or 'S' trap complete all as specified and directed.

S&F in repairs tubular towel rack CP (Make -Ess Ess Cat No TM-08) or equivalent make as mentioned here-in-after, complete all as specified and directed.

S & F in repairs Urinal spreader of Brass any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repair chromium plated sensor pillar tap superior quality including all necessary arrgangement complete, Make:- CERA F-6010109 or equivqlent cat part from the makes as mentioned here-in-after complete all as specified and directed

S&F in repairs vitreous china wash hand basin white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc, complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 250 to 500 Itr capacity of tanks including washing the tanks with water and draining out dirty water from tank including marking of date of cleaning of tank with synthetic enameled paint, complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 501 to 1000 Itr capacity of tanks including washing the tanks with water and draining out dirty water from tank including marking of date of cleaning of tank with synthetic enameled paint, complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 5000 Itr capacity of tanks including washing the tanks with water and draining out dirty water from tank including marking of date of cleaning of tank with synthetic enameled paint, complete all as specified and directed.

S&F in repairs HDPE PVC lid (cover) suitable for 500 ltr to 1000 Ltrs capacity PVC water tanks, complete all as specified and directed.

M & L for Cleaning and removing all dirt and scale etc from RCC tank 20000-30000 Ltrs and from the mouths of circulating pipes of tanks and washing the same with bleaching powder complete all as directed by Engr-in-charge.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size 450x325x120mm and fixed to wall after taking down old mirror, complete all as specified and directed. Make- CERA or Equivalent

S&F in repairs CP brass wall mixer suitable for mixing of hot & cold water swan neck pattern as approved, screwed down for 15mm dia iron pipe, complete all as speicified and directed. Make- CERA or Equivalent

S&F in repairs CP wall mixer of 15mm bore of pipe conforming to CAT No. CQT-23273UPR of "Jaquar" or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs CP bottle trap 32mm size with 300mm & 190mm long including with wall connection pipes & wall Flange CAT No-ALD-769L300x190 of "Jaquar" or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder with flap recessed type stainless steel CP Cat ID AHS-1533 of Jaguar or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs soap dish, brass chromium plated, Cat ID AHS-1531 Jaguar or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs, two way bib cock with wall flange, brass, chromium plated toilet fittings conforming to CAT No. FUS-29041 of jagur or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S&F in repairs wash hand basin CP brass mixer suitable for mixing of hot & cold water as approved pattern, screwed down for 15mm dia iron pipe, complete all as specified and directed by Engineer in charge. Make : CERA F-2013461 or of equivalent cat part in Jquar or Hindware makes complete all as specified and directed.

S&F in repair health faucet cromium plated including with 1000 mm long pipe, complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed.

S& F in repair sheet glass (5mm thick) corner shelf 450x100mm including CP railing and CP brackets, complete all as specified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as specified and directed.

S&F in repairs CP towel rail 600 mm long 20mm dia fixed with plastic guities with steel screws etc., complete all as specified and directed. by Engineer in charge..

S&F in repairs soap dish brass chromium plated fixed with brass screws, complete all as specified and directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP Brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed. Note for item no 142 & 143:- Rate quoted shall be deemed to be inclusive of the cost of necessary scaffolding / security measures as the work is to be carried out on elevated height upto 12.0 m high building.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as specified and directed.

S&F in repairs Cast iron rain water pipes 100 mm bore (dia) sand cast in any length with ears with cement joints in cement mortar 1:1, fixed to walls including MS clamps nuts, bolts, and washer complete all as specified and directed.

S&F 100 mm dia CI bends or elbows, square or obtuse fixed in proper position complete all as specified and directed

S&F in repairs elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of jagur or of equivalent cat part in CERA or Hindware makes complete all as specified and directed.

S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing / taking down unserviceable treatment / surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection should have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent make as approved complete all as directed by Engr-in-charge.

M&L for preparation of old decorated surfaces by washing, rubbing down and scraping and applying one coat of oil bound distemper on wall complete all as specified and directed.

M&L for complete removal of existing treatment where ever necessary and applying two coat of Oil Bound Distemper on wall over a coat of Alkali resistant primer complete all as specified and directed

M&L for Preparation of old decorated surfaces by brooming down and scraping and applying one coat of oil bound distemper on ceiling complete all as specified and directed

M&L for preparation of old decorated surfaces by brooming down, rubbing and scraping down and applying one coat of white wash on walls complete all as specified and directed

M&L for preparation of old decorated surfaces by brooming down, rubbing and scraping down and applying one coat of white wash on ceiling complete all as specified and directed

M&L for preparation of old painted wooden surfaces exceeding 10 cm width or girth and applying one coat of synthic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying one coat of synthic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. Note:- Unit rates of this item will be deemed to be inclusive of the cost of scaffolding and necessary safety measures as the work to be carried out upto height of 15.00 m

M&L for preparation of old decorated surface of any description over 10 cm width or girth on walls , soffits / facia of chajja / roof projection etc and applying one coat of cement base paint complete all as specified and directed

M&L for complete removal or existing treatment where ever necessary from walls, soffits / facia of chajja / roof projection etc and applying two coats of cement base paint complete all as specified and directed

M&L for preparation of old decorated surfaces of walls / ceiling , soffits / facia of chajja / roof projection etc and applying one coat of plastic emulsion paint complete all as specified and directed

M&L for complete removal or existing treatment of walls and applying two coat of plastic emulsion paint complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces duly mixed with WPC as per manufacturer's instructions and finished with sponge finish to plaster surface including taking down of old cement plaster and removing of debries etc outside MD land complete all as specified and directed by Engineer-in-Charge. Note :- WPC will be measured and paid separatley.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed

M&L for rendering 10mm thick in CM 1:6, on brick / PCC block / AAC block walling, finished even & smooth with a thin layer of sagol finish complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coat of plastic emulsion paint on wall complete all as specified and directed.

M&L for preparation of surfaces of walls and applying 2mm thick wall care putty on walls including rubbing with sand paper to make surfaces even and smooth complete all as specified and directed.

M&L for writing letters or figures (block, roman, italic or Indian) not exc 30cm high as in writing building Nos etc complete all as specified and directed.

Taking down carefully excising unserviceable point wiring of any type (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, Point regulators etc) for taking credit and making good disturbed surfaces of wall, floor etc, complete all as specified and as directed

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, concealed / surface mounted as per site requirement including with mild steel sunken boxes / PVC surface mounted box with earth dolly duly covered with laminated hylem sheet/ PVC cover, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (a). One light point controlled by one, one way switch 5 Amps

(b). One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

(c). One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

(d). One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

All as per item no. 171 above but using 2.5 sq mm single core copper conductor cable for 5/15 Amps point including 2.5 sq mm copper conductor as earth continuity conductor, complete all as specified and directed

S&F in replacement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240 Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully including driver and light complete all as specified and directed. Make:- Havells Cat part No. PLUTONEO 2X2 PLR42W LED 8575 / LUKER CAT PART NO. LKM2240 / PHILIPS CAT PART NO. RC380B LED 365-6500 G5 L60W60 PSU OD SG

S&F in replacement of 18/20watt, 230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. Make- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH / Bajaj BCLAB 20W WH LED P

S&F in replacement LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency suited for installation in existing T8 tube light with G13 lamp holders complete all as specified and directed. Make:- Philips / Wipro / Havells / Bajaj

S&F in replacement of Modular Switch, one way, and 10 Amp one module complete all as specified and directed

S&F in replacement of Modular Switch, one way, and 20 Amp one module complete all as specified and directed

S&F in replacement of Modular Socket outlet multipurpose having provision for 3 pin, 16 Amp and 2 pin, 6 Amp, 2 module complete all as specified and directed

S&F in replacement of Modular Socket outlet multipurpose 6A - 2/3 pin 2 module complete all as specified and directed

M/s.BAJRANG CONSTRUCTION (BID ID -3080797)