Karnataka

AOC

Works

Lift Irrigation Scheme

Providing Lift Irrigation to SC Farmers Lands of Sampagaon Village in Kittur Tq Dist Belagavi (SCP/2025-26)

Minor Irrigation Department

Minor Irrigation Division Belgaum | Karnataka

Amount: ₹1.1 CrCloses: 18 Feb 2026Closed

Timeline

Published11 Feb 2026
Closed18 Feb 2026
Awarded—

Bids

1 Bid18 Feb 2026

#	Company	Amount	Status
1	VINAYAK SHIVAPUTRA MARADI ₹1.1 Craccepted-aoc	₹1.1 Cr	accepted-aoc

Tender Value

₹1.1 Cr

EMD Value

₹2 L

Closing Date

18 Feb 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Mahadev B

Office Number

Work Description

Providing Lift Irrigation to SC Farmers Lands of Sampagaon Village in Kittur Tq Dist Belagavi (SCP/2025-26)

Tender Information

Tender ID

MI/2025-26/LI/WORK_INDENT10467

Reference Number

MI/2025-26/LI/WORK_INDENT10467

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Belgaum

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredAnnual Turnover Certificate as per KW-4 Qualification of The Tenderer

RequiredCompany/Contractor Registration Certificate

RequiredWork done certificate as per KW-4 Qualification of The Tenderer

RequiredBank credit certificate as per KW-4 Qualification of The Tenderer

RequiredWork in Hand as per KW-4 Qualification of The Tenderer

RequiredGST registration Certificate

RequiredPAN & TAN Certificate

RequiredScanned signature of the bidder/representative to be attached while uploading the bid document

RequiredThe tenderer shall also disclose if there are any bankruptcy proceedings against him.

Required7A should be enclosed

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-4

All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in KPPP portal

The Employer reserves the right to accept or reject any of the tender without assigning any reason.

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified.

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement.

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc

The tenderer shall also disclose if there are any bankruptcy proceedings against him

The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work

During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of paymentt

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states).

A copy of GST registration certificate should be uploaded

The contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractors bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are excluding GST. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily

If the GST rates are revised during the contract period, payment will be made/withdrawn accordingly

For Works estimate cost more than Rs. 100.00 Lakhs : For Quality control tests of materials the contractor should provide required Rammer with Core Cutter, Balance and Moisture Meter, size 15x15x15 cms Mould Sets and for testing of sand and metal set of required mesh etc

As Per the condition laid down in Govt Letter vide MID/1011/MISU/2025 (7), Dated:21.11.2025 as condition that the works should be completed within the approved grant. Hence the contractor should quote rates similar to approved estimate price (Excluding GST) or below the approved estiamte price (Excluding GST)

Agreement with Registered Borewell owners copy and Borewell registration copy 7A should be enclosed

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

b) Satisfactorily completed (at least 90% of the Contract value), in last five years (i,e. 2020-21 to 2024-25) as prime contractor, at least one similar work such as Providing Lift Irrigation Scheme work to an extent of 50% of the cost of the work Rs.56.00 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer (if the work is done in other states)

Work Done Certificate

c)Executed in any one year, the following minimum quantities of workExcavation and Embankment (combined quantities)4110Cum Cement concrete (Including RCC & PSC50.00 CumProviding Steel Reinfrocment fabrication1160Kgs Providing & installing HDPE Pipes PE 80 PN-6200mm dia 140, mm dia4920Rmtr Supply&fixingof Submersiblepumpsets7.50 & 10HP with electrical5Nos

Work Done Certificate

Capabilities of Vendor

A Copy of GST Registration Certificate

Others -- GST Registration Certificate

Income Tax :Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos.

Others -- PAN & TAN Certificate

Scanned signature of the bidder/representative to be attached while uploading the bid document

Others -- Scanned Signature

Section 3, Qualification Information.

Others -- Formats as per Section 3, Qualification Information

The tenderer shall also disclose if there are any bankruptcy proceedings against him

Others -- bankruptcy proceedings

Agreement with Registered Borewell owners copy and Borewell registration copy 7A should be enclosed

Others -- 7A should be enclosed

Financial Status

3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24, 2024-25)(a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.221.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2025-26

Audited CA Certificate of Annual Turnover

Assessed available tender capacity-AxNx1.5-B where A -Maximum value of civil engineering works executed in any one year during the last five years (i.e. 2020-21 to 2024-25) (updated to 2025-26 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2025-26 price level of existing commitments and on-going works to be completed during the next 06/12 years (period of completion of the works for which Tenders are invited) Note -The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Audited CA Certificate of Annual Turnover

Others

b) Liquid assets and /or availability of credit facilities of no less than Rs.56.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹2,760

EMD Fee Amount

₹2 L

Important Dates

Last Activity

18 Feb 2026

Published

11 Feb 2026

Bid Opening

19 Feb 2026

Download Ends

17 Feb 2026

Pre-Bid Meeting

17 Feb 2026

BOQ Preview

•

Pumping Machinery

•

Design, manufacture, supply, erection, trail running, performance testing and commissioning of Submersible pump of approved make conforming to IS: 8034 (2002) having specified pump output under specif...

•

Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves conforming to BS EN 593 / IS 13095 with shaft shall be of stainless stee...

•

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420 /431 and spring shall be spring steel...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe- 410 grade ) delivery pipes of specifie...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...

•

Electric Operated Circular or Rectangular Travelling Crane (Single Girder). Providing, erecting and commissioning single girder Electrically Operated Rectangular Over head Travelling Crane with 6 m li...

•

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

•

Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V etc., complete wit...

•

Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the E...

•

Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engin...

•

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

•

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat /ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conn...

•

Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...

•

63 kVA, Aluminum Wdg, Star 2 (5 Star)

•

Distribution Transformer -3 phase, 11KV/433V - Stacked CRGO Core with Oil etc., complete with all leads & lifts, as per detailed specifications, drawings and dire...

•

Pump House Lighting

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before con...

•

Supplying heavy gauge PVC Conduit Pipe 25mm Dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cuttingin the wall and fixing by bracing U or J hooks and cement...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130- 1984 and (Virgin) PVC insulation sheathed suitable for wor...

•

Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire)FRLS multi strand ...

•

Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi stra...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution board son wall /wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase /...

•

Supplying of 1440rpm heavy duty exhaustfan with bracket blades suitable to operate on 230V 50Hz, AC Supply etc., complete with all leads & lifts, as per detailed specifications, drawings and direction...

•

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets ,with bolts and nuts and a 5 amps, ceiling rose w...

•

Supply of round/square recess/surface mounted rolling type LED Down light with 10-12W GU 10 LED Lamp Rib Fabricated from Diecast aluminium with white powder coated prewired to mains connector & has sw...

•

Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & FlouresentTube.1x4'Tubelight fitting etc., complete with al...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator etc., complete with all leads & lifts, as per detailed specifications, drawi...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...

•

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

•

Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of175mm length is fixed for fixing LED street light fitting...

•

Fabricating supplying and mounting MS boxmadeout18SWGsuitableforfloor/ wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with ta...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws etc., complete with all leads & lifts, as pe...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supply of LED Streetlight lumin aire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

•

Construction of Pump House

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete with all leads & lifts, as per detailed specifications, drawings an...

•

Providing and laying in position Cement Concrete for all Foundation works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

•

as per relevant IS Codes machine mixed with super...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

•

as per relevant IS Codes machine mixed with supe...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and

•

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works

•

of bridges upto 3.50 m height. The granite/tra...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour

•

etc., complete with all leads & lifts, as per detaile...

•

etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...

•

Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points and all other ancillary operations etc., complet...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...

•

Sinking of Borewell

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true

•

to line, level and perfect linking at joints leak p...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Pumping Machinary

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 1x3x4 Sqm etc., complete with all leads & lifts, as per...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendmentsfor Size 50 mm etc., complete with all leads & lifts, as per detail...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Panel Board Unit

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit etc., complete w...

•

Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools a...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

NETWORK TO IRRIGATION

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete with all leads & lifts, as per detailed specifications, drawings and directi...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

standard bid document kw-4 Sampagaon LIS.doc

Tender Document • 3.55 MB

Drawing.pdf

Design Document • 0.06 MB

detail specification.zip

Others - detail specification • 29.02 MB

Royalty.pdf

Others - Royalty • 0.19 MB

Bar Chart Office10467.xls

Others - Bar Chart • 1.20 MB

banker certificate.doc

Others - banker certificate • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

VINAYAK SHIVAPUTRA MARADI

₹1.1 Craccepted-aoc