SPL REPAIRS TO SEWAGE LINE AREA DRAINAGE NEAR GTO GROUND AT SELECTION CENTRE SOUTH UNDER GE SOUTH BANGALORE

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar incl. all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debrits out side the MD land complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15 cm thickness, (below or above ground level) and removing the debrits out side the MD land complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15 cm thickness, (below or above ground level) and removing debrits out side the MD land complete all as specified and as directed.

M&L for cutting into existing manholes and benching for connecting new drains and making good the disturbed surfaces and forming branch channel (1/2 round 3/4 section) in cement concrete (1:2:4) type B-1, and finished even and smooth and reforming benching as required for 225 mm dia of pipe complete all as specified and as directed.

M&L for excavation in trenches, n.exc. 1.5 m wide and n.exc. 1.5 m depth for foundations, laying pipes, drains or manholes etc, n. exc. 10 sqm on plan and n. exc. 1.5 m depth, and getting out in hard/dense soil including trimmings sides and forming bottom surfaces to required level/slope etc, complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in solid block masonry, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl. weathering slightly rounded or chemfered angles and throating concrete complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in surface channels and drains complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note :- Water proofing compound shall be measured and paid separately as supply only under relevant item of this schedule).)

Supply only integral water proffing compound ISI marked as approved, complete all as specified and as directed.

S&F cast iron work grade FG 150, unmachined, in brackets, rungs, gully traps, gratings, railing, frames, manhole coveres, fire and soot doors, dampers, stop valve boxes, gate stops, parts or ranges, balusters and similar articles n. exc. 5 kg each complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating incl. jointing with solvent cement complete all as specified and as directed.

Demolition and breaking up drain pipes upto 250 mm dia(Salt glazed ware, AC or Reinforced concrete, PVC (SWR, CI) set in cement mortar or solvent complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

PVC 110 mm bore (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction, double (double T) equal or unequal with access door complete all as specified and as directed.

M&L for 160 mm bore UPVC pipes ring type (washer type) Type 'B' conforming to IS-13590-1992 for sewer lines laid in trenches on concrete bed, to required slope, jointed and tested complete all as manufactures instructions and as directed. Note: Concrete bed will be measured and paid seperately under relevant item of this schedule.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes of 150/160 mm bore, laid to falls, including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.

M&L for pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, set in cement morter 1:4 including necessary form work complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl. cranking, bending spirally for hooping for columns, hooking ends and binding with and incl. mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Removing surplus excavated soil outside the MD land to a distance exc 200 m and not exc 250 m complete all as specified and as directed.

Returning, filling in hard/dense soil, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and as directed.

M&L for cutting holes into or through brick walls built in cement mortar for superficial area exc. 150 sq cm but n. exc. 400 sqcm complete all as specified and as directed.

M&L for cutting out existing PCC floor, hardcore, or any other matelled, road cutting upto 1 M wide and n. exc 300 mm depth and making good the disturbed portion as per the existing surface after laying of sewage line complete all as specified and as directed.

M&L for 15 mm bore medium grade galvanised steel tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F PVC connection 15 mm dia with PTMT nuts of lenth 450 mm complete all as specified and as directed.

S&F towel rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and fixed with wooden/plastic cleats (min wt 190 gms) complete all as specified and as directed.

S&F soap dish vitrious china white, approximate size 160x160x90 mm fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F swivel shower of PTMT any colour for fixing with 15 mm pipe (min wt 40 gms) and shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (min wt 42 gms) complete all as specified and as directed.

S&F 15 mm bore fancy type bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15 mm bore stop valves, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F grating round 140 mm size of PTMT (min wt 50 gms) complete all as specified and as directed.

S&F solid PVC door frame at size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixed in opening as per specification and drawings given in SSR part -1,complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side colour PVC shet to be fitted in the M.S frame selded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixed to frame, all as per specification & drawing given in SSR part -1, complete all as specified and as directed.

S&F 75 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 125 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed complete all as specified and as directed.

S&F 100 long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:4 complete all as specified and as directed.

S&F coloured glazed ceramic tile in verticle surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc, incl. raking out joints, hacking for key scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl. finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

S&F in repair washdown water closet orrissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl. making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan complete all as specified and as directed.

S&F PVC flushing cistern low level of 10 ltr capacity ,white ,with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 300 mm complete all as specified and as directed.

S&F 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as specified and as directed.

S&F 32 mm bore waste coupling of PTMT (half or full threaded). Min wt 45 gms) complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin flat back size 550x400 mm incl. brackets chain & plug and waste pipe waste coupling etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc. 1.5 sqm but n.exc. 4 sqm each complete all as specified and as directed.

M &L for providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, for roof padding incl. weathering slightly rounded or chemfered angles and throating complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl. finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) Applying bitumen primer at the rate of 0.27 Ltr per qm as per IS 3384-1986 and bonding bitumen of VG-10 @ 1.2 Kg per sqm (b)APP Modified water proofing membrane as per IS 16540/ 16532-2017 mineral finish, 3mm thick and reinforced polyester /HMHDPE mat black finish over compatible primer / bonding bitumen and finishing the top surface with bituminus aluminium finishing the top surface with bituminus aluminium paint @ 0.10 Ltr per sqm complete all as specified and as directed.

Dismantling mangalore pattern roofing tiles with ceiling tiles or slate roofing & similar work complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 20 mm dia GI tubing medium grade concealed type with fittings fixed on walls or laid in floor complete all as specified.

S&F 15 mm dia GI tubing medium grade concealed type with fittings fixed on walls or laid in floor complete all as specified.

S&F 500 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and as directed.

S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified and as directed.

S&F 20 mm bore stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe of brass ferrule and fixed complete all as specified and as directed.

S&F vitreous china washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl. all joints and connection to drain pipe and flush pipe complete all as specified and as directed.

S&F vitreous china toilet paper holder white, box type complete all as specified and as directed.

S&F 32 mm bore bottle trap of PTMT having minimum water seal of 25 mm (min wt 260 gms) complete all as specified and as directed.

S&F 100 mm dia grating doom of PTMT (min wt 25 gms) complete all as specified and as directed.

S&F 125 mm dia grating doom with waste hole of PTMT. (Min wt 40 gms) complete all as specified and as directed.

S&F vitreous china urinal partion white of size 310x770 mm complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (min wt 60 gms) complete all as specified and as directed.

S&F 15 mm bore concussive push button taps of cast copper alloy screwed for iron pipe and fixed complete all as specified and as directed.

S&F brass CP 15 mm bore two way bib cock, quarter turn with wall flange and aerator complete all as specified and as directed.

S&F 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

M&L for 40 mm thick granite (of any type) work (table, rubbed and polished) for fixing of wash band basin and like in cement mortar (1:4) incl pointing in white or coloured cement (1:2) using mable dust with admixture of pigments to match with shade of granite complete all as specified and as directed.

S&F 15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F 15 mm bore bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

M&L for 6 mm thick asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and as directed.

S&F in position suspended false ceiling system using E Grid suspended ceiling grid system, the size of grid shall be 600x600mm with aluminium powder coated frame work, main runner 39x24mm, cross tee 29x24mm and wall angle 22.2x22.2mm using 4mm thick high pressure stream cured non primered classic, designer variant E-Board ISI marked IS No 14862-2000. Fibre cement E Board to be placed in the grid of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins/self tightening screw in roof with butterfly clips complete all as specified and as directed.

M&L for granite (of any type) tiles 20 mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl. grinding and polishing for urinal partion complete all as specified and as directed.

M&L for preparation of untreated/newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper white or tint over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and as directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc & brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and as directed.

S&F vitrified (heavy duty) designer parking tiles area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, 10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Note : The colour and design shall be as approved by GE.

Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium/copper point wiring for light, fan, socket 5 Amps and 15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc. complete all as specified and as directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories & pressed steel terminal boxes and providing 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light point controlled by one switch complete all as specified and as directed.

S&F switch piano flush type, 5 Amps single pole, one way, 230 volts complete all as specified and as directed.

M&L for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.

S&F MCB SP 06- 32 Amps, AC, 240 volts, 50 Hz, 10 KA rating "C' Curve complete all as specified and as directed. Make : Indoasian Cat No: 811122 to 811132

S&F MCB SPN 6 - 32 Amps, 240 Volts 50 Hz, 10 KA rating "C' Curve complete all as specified and as directed. Make : Indoasian Cat No: 811144 to 811151

S&F sheet metal enclosure (for DB's when MCBs to be used), single pole and neutral double door, 8 way, 240 Volts including the taking down the unserviceable one complete all as specified and as directed.

S&F LED batten suitble for indoor application 20 W, 4' length, housing in extruded aluminium natural anodised finish with end cap made of ABS plastic with white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down existing unserviceable tube light fittings complete all as specified and as directed. Make :- C&S Cat part No LTTB4F20WLED/W or equivalent in Havells/Bajaj.

S&F recess mounted 36 watt 2'X2' exturded aluminium housing with milky diffuser recess mounting ultra slim LED panel integrated electronic driver of operating voltage 110 to 265 Volts with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size and taking down old unserviceable tube light fitting complete all as specified and as directed. Make : C&S Cat No. LTCRSLM36WATT2X2 or equivalent in Havells/Bajaj.

M&L for cutting of brick/stone masonary for fixing of exhaust fan and making good to the disturbed surface including painting/colour wash complete all as specified and as directed.

S&F metalic exhaust fan AC single phase 230/240 V of size 300 mm sweep with louvers connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Bajaj Cat No : FRESHEE MK II Product code 70003 or equivalent in Havells/usha.

Suresh painters

S SUDHAKAR