Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.8 L
EMD Value
₹15,554
Closing Date
29 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
office of the Executive Engineer Division VI Mapusa
Work of conversion of 2 span of LT overhead line to underground cabling for enhancing safety of students of St. Xavier Vidyalaya in village Panchayat Nerul in the jurisdiction of Section office Verem Sub Division-IV CalanguteDivision VI Mapusa
2026_ED_32451_1
Tender24(26-27)/4817 dt19/10/2026
Open Tender
Electrical Works
Percentage
90 days
Nerul Verem Goa
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹15,554
19 Oct 2026
19 Oct 2026
30 Oct 2026
20 Oct 2026
29 Oct 2026
21 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | COST OF MATERIAL | - | - | - | - |
| 2 | Supply & Erection of XLPE armoured 3.5Cx50 Sqmm 1.1 KV Grade Cable (For Service Connection) | 100 | Mts | 500 | ₹50,000 |
| 3 | Supply & Erection of XLPE armoured 4Cx16 Sqmm 1.1 KV Grade Cable (For Service Connection & Streetlight) | 480 | Mts | 300 | ₹1,44,000 |
| 4 | Supply & erection of PVC Copper Cable 2Cx2.5 Sqmm (From Streetlight Pole Junction to LED Fixture) | 20 | Mts | 119 | ₹2,380 |
| 5 | Supply,Erection,Testing & Commissioning of HDGI 6 mts long Octagonal tapered Poles made out of 4mm thick plate (Top 70mm, Bottom 155mm) and having the following provisions and of make:- Bajaj Electrical Ltd, Transrail, Hakke Industries Pvt. Ltd. and Utkarsh Industries Pvt. Ltd.
a) Hot rolled stud plate confirming to grade S355JO
b) Base plate steeel of size 225x225mm, thickness 16mm confirming to IS226/IS2062
c) 1.5 mts long single arm brackets HDGI, 3.25mm thick for mounting of outer diamter 40 mm
d) 50mm dia HDPE pipe, PN-4,P-63, Grade 2.65mm for cable entry and exit (2 runs)
e) Door opening of approx. length 500mm at an elevation of 500mm from base plate | 2 | Nos | 24,500 | ₹49,000 |
| 6 | Supply & erection of Set of 4 nos J type M20 (UNF Thread -100mm) foundation bolt of grade EN8 & IS1367 of suitable length for 6 mtr Pole | 2 | Nos | 1,500 | ₹3,000 |
| 7 | Supply and Erection of SMC Connector Strip of size 280x35mm along with 4 connectors and mounting holes suitable for fitting inside Octagonal Pole | 2 | Nos | 375 | ₹750 |
| 8 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.
(a) SP MCB, 6 Amps Cat A | 2 | Nos | 433 | ₹866 |
| 9 | Supply & Installation of 50 Watts LED Fixtures | 2 | Nos | 5,900 | ₹11,800 |
| 10 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for following sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
(a) 3 1/2 x 120 Sq. mm. | 1 | Nos | 1,035 | ₹1,035 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 28.52 MB
BOQ_32836.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .