Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L1 | Accepted-AOC L1 | |
| 2 | L2₹34.3 L+₹7,223 (0.21%)Rejected-Finance MOHALLA KAMA KHAN WARD NO 07 HOUSE NO 88 DISTT POONCH J K | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹37.3 L+₹3.1 L (9.10%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹37.6 L+₹3.4 L (9.92%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹38.3 L+₹4.1 L (12.0%)Rejected-Finance CITY CHOWK RAJOURI J K 185131 | RAJOURI | RAJOURI | JAMMU AND KASHMIR | 185131 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
SPL REPAIR TO TOILET AND BATH OF BLDG NO P-42 AND P-43 AT POONCH AND SPL REPAIR/ REPLACEMENT OF BER PLANTS AND EQPT IN THE AOR OF STN HQ POONCH UNDER GE 881 EWS
2022_MES_553776_2
GE/PNH-52/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹68,000
Yes
2 Mar 2023
3 Nov 2022
1 Dec 2022
3 Nov 2022
24 Nov 2022
10 Nov 2022
Amount
B&R PORTION:- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore complete all as specified and directed.
Taking up or down steel tubing and connections for 25mm bore complete all as specified and directed.
Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for Non skid coloured glazed ceramic tiles 7 to 8 mm thick square/rectangular area of each tile exc 0.11 sqm not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including screed bed or bedding layer of 15 mm thick in cement morter (1:6) complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 450x350mm x 7mm thick skarting ,dado,over and incl 10mm thick screed in CM 1:4 as backing coat of wall tiling of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair of stone /Brick surface in CM 1:6 on walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick on ceiling urfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L for walling of random rubble stone masonry uncoursed , well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.
All as per Srl item No. 14 Above but except stone, complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered / unplastered surfaces of ceiling, and applying two coats of white wash complete all as specified and directed.
S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and directed.
S&F Butt hinges medium weight cold rolled mild steel 100 mm complete all as specified and directed.
S&F pressed steel frame of size 105X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with double rebated including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified and directed.
S&F Factory made, 2nd class hard wood, 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers size of members as specified complete all as speified and directed.
S&F PVC water tank of capacity 1000 ltr rotational moulded polyethylene (cylindrical vertical with closed top) triple layered hoisted and fixed in position incl 20mm float valve incl dismantling of old tank complete all as specified and directed.
S&F in repair 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.
S&F in repair angle valve/ Stop valve (ISI Marked), cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.
S&F in repair angle valve/ Stop valve (ISI Marked) concealed type, cast copper alloy, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed in repair complete all as specified and directed.
S & F in repair bib tap 15 mm bore, fancy type, chromium plated with long shank and cup, crewed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F for 15mm dia steel tubing, " medium grade', galvanised, with all fitting, laid in trenches complete all as specified and directed.
S&F for 20mm dia steel tubing, " medium grade', galvanised, with all fitting, laid in trenches complete all as specified and directed.
S&F for 25mm dia steel tubing, " medium grade', galvanised, with all fitting, laid in trenches complete all as specified and directed.
S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
S&F 100 mm of aluminium, anodised, barrel tower bolt extruded section complete all as specified and directed.
S&F 150 mm Extruded aluminium alloy handles, cast type, fixed complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- luminium alloy complete all as specified and direted.
M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over a coats of pink primer complete all as specified and directed.
S&F in repair Suspended false ceiling using E- board suspended ceiling grid system of grid size 600x600mm incl fixing of frame work made up of special section MS galvanised sheet with zinc coated cellular intro painting and consisr=ting of angle cleats of size 25 mm wide, 1.6 mm thick with flag fixing to the ceiling with dash fastener 12.5mm x 40 mm long or with 2 mm dia GI wire or fixed with bolts in GI channel main runner 35 x 25mm sheet thickness 0.5mm, cross runner 25 x 25mm sheet thickness 0.5mm for fixing E-board incl fixing of E-board with ceiling section and perimeter of channel 25 x 25 x 1mm thick, 27 mm high flange of 20mm to 30mm long extra, complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F 0.63mm thick galvanised corrugated mild steel sheeting with grade of Zinc coating of 275 gms/Sqm with two corrugation side lap and at least 150 mm end lap , fixed with coach screws and washers in roof, walls etc, complete all as specified and directed.
All as per Srl item No. 38 Above but except sheet, complete all as specified and directed.
S&F 0.80mm thick plain galvanised mild steel sheeting with grade of Zinc coating of 275 gms/Sqm, in ridges, hips, valley gutters, drip and straight fastenings (length and girth as fixed) fixed with coach screws and washers etc, complete all as specified and directed.
Dismantling mild steel work as in wind tie,grill gratings complete all as specified and directed.
Fixing only Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base and flooring, complete all as specified and directed.
M&L for glass dividing strip 3mm thick 38mm width,inserted in flooring, complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base and flooring, complete all as specified and directed.
M&L for cement concrete (1:2:4) using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.
S&F in repair Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.
S&F mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works complete all as specified and directed.
M&L for two coats of synthetic enamel painting on new steel surfaces over 10cms width or girth over a coat of red oxide primer etc complete all as specified and directed.
M&L for preparation of old steel surfaces and applying one coat of synthetic enamel painting complete all as specified and directed.
M&L for 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts on both ends of length 450mm complete all as specified and directed.
S&F in repair 75mm dia PVC floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repair 75mm dia PVC multi floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F in repair salt-glazed stoneware gully traps of size 150x100, square or round mouthed, type 'P' complete all as specified and directed.
S&F in repair Soap dish, cromium plated fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs squatting pan of size 580 x 440 mm white, with integral foot rests including connection to trap, flushing cistern and flushing pipe, anti-syphonage pipe, etc. complete including 100 mm dia ‘P’ trap set in and including concrete making good to including jointing to existing pipe of floor of size 100mm complete all as specified and as directed.
S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white, excluding flushing cistern and flushing pipe including connection to 'P' branch pipe 300 to 450 mm long of size 100 mm dia, cistern and antisyphonage pipe etc and incl PVC seat cover & health faucet mild steel chromium plated suitable for 15 mm dia flexible pipe 1.25 mtr long alongwith hook including fixing bolts and making good the surfaces, complete all as specified and directed
S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints complete all as specified and directed. Make:- Prayag cat part No 501 or Equaivalent cat part of make as specified in P.S.
S&F in repair, Vitreous China urinals, Half stall type, white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with brackets, flush pipe, grating and Union for discharge pipe. Inclusive of fixing supply pipe to flushing cistern, trap and 32mm waste pipe, 32mm waste coupling and PVC urinal spreader, complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed
S&F in repair towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed.
E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
Taking down carefully unsv main switch / DBs alongwith MCBs any type / capacity and making good disturbed surface to match with the existing surface, complete all as specified and directed.
M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following:-
One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.
One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.
One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.
All as per srl item No 68 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.
S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC poly carbonate, insulated body, complete all as specified and directed.
S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.
S&F in repair switch socket combination 2 in 1, 5 pin, 6 Amp flush type universal), complete all as specified and directed.
S&F in repair switch socket combination 2 in 1, 3 pin, 6 & 16 Amp flush type universal, complete all as specified and directed.
S&F in repair socket outlet 2 in 1, 3 pin, 6 Amp flush type, complete all as specified and directed.
S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. Make:-Havells/Anchor/Legrand
Supply and fixing in repair LED adore 10 watt lamp (B22 base) suitable for angle holder complete all as specified and directed.
Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed.
S&F sheet metal enclosure for DBs, SPN double door (IP43), 4 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.
Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed.
S&F in repair MCB SPN 40-63 amps, breaking capacity 10 KA, 'C' series complete all as specified and directed.
S&F in repair MCB single pole 6 to 32 amps, capacity 10 KA, 'C' series complete all as specified and directed.
Supply, laying and testing of cable in trenches/ poles XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 16 sqmm including taking down old cable any type complete all as specified and directed.
S & F in replacement house service bracket (hook type) complete with 3.0 mtr long GI pipe 40 mm dia medium grade, 02 Nos, 90 degree bend incl MS hook, stay or guy complete all as specified and directed.
S&F in repair submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable, 1100 volts grade of size 4 Sqmm (nominal area) each and one single core 4 Sqmm cable as earth continuity conductor to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover complete all as specified and as directed. Note : Three runs of 4.00 Sqmm cable and one run of PVC conduit shall be measured as on unit
M&L for Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.
Prime Mover : Primemover suitable for driving alternator 62.5 KVA capacity having the suitable BHP at 1500 RPM for rated output for alternator in accordance with latest BS/IS Specification with electric starting device with all standard fitting and suitable capacity of lead acid maintenance free battery of 12 Volts 180AH-01 Nos with battery charger each (Make:- Exide/Amaron/HBL/Standard). Engine over speed safety mechanism Shall be incorporated. The engine shall be equipped with standard fitting as per manufacture's recommendations. Engine Control Panel :- (a) All relevant parameters shall be conventionally displayed on complete panel thereby providing easy monitoring of lub oil, pressure, coolant temperature, Battery charging, Ammeter, RPM, Hour meter and starting switch etc. (b) AMF panel with bye pass arrangement for supply in main and DG set, internal wiring and power contactors suitable for 62.5 KVA gen set, all as per manufacturer's recommendation. Bye pass arrangement for main and DG supply along with all the parameters and accessories as per manufacturer's recommndation and CPRI approved & as per relevant IS
Fuel Tank : Fuel tank of 12 hours capacity will be installed as per the manufacturer's requirement including all necessary pipe connections from fule tank to engine and over flow from engine to tank. Engine Alternator : 62.5 KVA output 3 phase, 50 HZ, 240 Volts 4 wire AC supply 0.8power factor at 1500 RPM self excised screen protected and drip type,insulation class 'H' continously rated brushless type conforming to relevant BS/IS code as per current manufacturing shedule of standard manufacturer. Engine Alternator Shall be mounted on specially designed base plate of rigid welded constructions with anti vibration pads. The engine and alternator shall be placed on foundation including necessary civil work as per the manufacturer's recommendations/site requirement. Note : (a) The unit rate shall deemed to include the cost of diesel and lubrication required for testing and commissioning of DG set as per department procedure and shall be arranged by contractor. (b) Extension of exhaust pipe for DG set along with standerd accessories like flange, nut bolts, asbestous rope etc shall be provided by the contractor and the cost of the same shall be included in the unit rate quoted by contractor. (c) Cost of foundation and necessary civil works as per site requirement shall be included in the unit rate quoted by the contractor.(d) DG set shall be as per latest CPCB forms
S&F in repair Earthing for poles and other machinery/eqptGI strip as earth lead and MS galvanised steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified and directed. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.
JAMWAL CONSTRUCTION CO
M/S BADRI NATH GUPTA
ABINASHI ENTERPRISES
MS SHAM ARMYSTORE
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .