E-Tender No. 02/2021-22, EUDC-II, Noida

Amount

Repairing of broken/badly damaged S.T Poles (damaged at ground level) in existing H.T/L.T lines due to extra ordinary rusting & scaling. From bottom side welding of 4/5 pieces( approx 75 cm. long) of angle iron of size 50x50x6 mm. Ist of all digging of pit around the pole of size 1.0 mtr. x 1.0 mtr. x 1.0 mtr. is to be done and then cleaning of rust & de-scaling with the help of hard wire brush & chisel and then MS angle iron of size 50x50x6 mm in 4/5 pcs. of required length as per site requirement varying from 70 cms to 75 cm to cut down and then to be welded with the healthy top and bottom portion of the pole with Ist class electric welding with own welding generator set in such as way that on top of bottom potion over-lapping of healthy part is covered 200 mm length approx. before welding the poles where top & bottom portion are separated, the same are to be kept in alignment safely & after completing the above work, the pit should be refilled. Concreting of S.T Pole for grouting (0.285 cu mt.) cement, stone blast) Making plinth of above repaired ST pole in round shape of height 0.30 meters from ground level having outer dia of 500 mm size in CC 1:3:6 in cement, sand , Stone ballast with Digging of pit of damaged pole in Pakka road (Hard soil) & Kacha Road (Soft soil) with the help of road cutter/digging machine, Tractor etc.

Strengthing and Labelling of old damaged 8.50mtr PCC/11 mtr ST Poles with dismentaling all accessories and re-installed all line accessories, connected connection all new line accessories with comissioning the line.

Single supports on New ST Pole of 11 Mtr. Long / 8.5mtr. PCC Pole with making connection complete in all respect with commission of line.

Grouting, concreting and plinthing of single support and damaged old ST/PCC pole of 11/8.5 mtr. long with cement, stone ballast & coarse sand in ration of 1:3:6 complete in all respect as per RESPO schedule.

Dismentaling and Removal of damaged ACSR different types of HT/LT conductor and L.T. ABC Lines from both side spans of damaged pole and removal of line accessories safely from damaged pole in different sectors with making bundles in coil shape including both side loading and unloading from work site to JE Store.

Re-laying lifting, stringing & proper sagging of new conductor and ABC Cable in place of old and damaged removed ABC and conductor on H.T/L.T line with binding, jumpering with complete connections in all respect as per respo norms.

Carriage of New 8.5mt. Long PCC pole, 11 mtr. Long STP and Distribution box (Single Phase/Three Phase) and Various type of New conductor and LT Lines cable and Other required line material in a 24 feet's vehicle/full lenght truck from Central Store, Shaibabad/Sector 20, Noida/J.E Store to work site including safe loading and unloading at both ends.

S.S. CONTRACTOR