COMPREHENSIVE REPAIR AND MAINTENANCE OF SECURITY LIGHTS,STREET LIGHTS AND OTHER MISC REPAIR WORKS UNDER AGE E/M OF GE SATWARI

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth in any type of soil for laying of cables, pipes etc. and getting out complete all as specified and directed .

Disconnecting & taking out defective under ground cable of any size from trenches, pole, pipe, floor, wall etc and removing from site complete all as specified and directed. Note:- Excavation & earth work shall be measured & paid separately

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 10 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. .

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 10 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. .

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. .

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 2 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. .

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. .

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 3.5 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and cable cover for protection of cable shall be measured and paid separately. .

Supply and laying / fixing ,GI pipe, light grade, 40mm dia bore for cable protection fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement, including taking out old unserviceable pipe complete all as specified and directed.

Supply and laying / fixing ,GI pipe, light grade, 80mm dia bore for cable protection fixed to pole/wall with MS clamps, nuts, bolts etc or laid under floor/road/pavement, including taking out old unserviceable pipe complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

Returning, filling in, including spreading, leveling ,watering and well ramming in layers not exc 25cm in soft /loose soil complete all as specified and directed .

Removing excavated material or surplus soil to a distance not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed ..

S&F in replacement 6 sqmm, 2 core, PVC insulated aluminium conductor flexible industrial cable, PVC sheathed, 1100 volts grade, from junction box/overhead conductor to street light pole complete all as specified and directed

S&F in replacement street light bracket fabricated out of GI tubing, medium grade, 40mm bore, bend to the shape as directed and of length 1.2 mtr complete with mounting MS clamp made of flat iron 25 x 3 mm of suitable length including nuts, bolts etc of suitable size and painting of MS clamps with two coats of aluminum paint over one coat of red oxide primer complete all as specified and directed .

S&F Junction box of size 250 x 200 x 100 mm, out door type, IP65, made out of polycarbonate with glass fiber re-inforced, suitable for 3 phase, 415 volts, pole mounting consisting of aluminium bus bar strip 15cm x 3mm, 4 Nos fixed on porcelain or epoxy terminal / insulators and provision for incoming/outgoing cables with gromats including in built 6 Amp MCB, SP, 10KA complete all as specified and directed .

S&F LED Tiranga Rope light 18 Mtr long , IP 65, Input Power 10W/meter,Input Voltage 220-240V AC, Input Frequency 50 Hzs, Input Current 0.045 Amp/mtr, Power Factor 0.95, Width of strip (+/- 0.1mm) 8 mm, length/reel - 18 Mtrs, Nos of led per mtr 120 LED, LED Beam angle 120 degree, Rope light per color length ( 6 mtr orange, 6 mtr white, 6 mtr green), Fixing method silicone clip, ingress protection - IP 65, Ingress protection method silicone tube, silicone tube dimention 11.5 x 5.5 mm +- 0.5 mm, working temp range -20 degree celcius to + 45 degree celcius, working humidity range 10-90 RH complete all as specified and directed

S&F in rplacement Bollard light 10 Watts, 240 Volts, IP 65, 360 degree light distribution, die cast aluminium powder coated housing with frosted PC diffuser including fixing with metal sleeve anchor fastners & bolts of suitable size & numbers in plain cement concrete complete all as specified and directed.

S&F in replacement LED flood light luminaire 100W, IP66 new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type with high power LEDs as light source including electronic driver 100W complete all as specified and directed .

S&F in replacement LED flood light luminaire 120W, IP66 new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type with high power LEDs as light source including electronic driver 120W complete all as specified and directed .

S&F in replacement Post Top light 40 Watts, 360 degree, 240 volts IP 66 , die cast aluminium housing powder coated housing with frosted PC diffuser including fixing with metal sleeve anchor fastners & bolts of suitable size & numbers in plain cement concrete complete all as specified and directed.

S&F in replacement LED Street lighting 30W, IP66, New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 30W LED 6000K complete all as specified and directed.

S&F in replacement LED Street lighting 45W, IP66, New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 30W LED 6000K complete all as specified and directed.

S&F in replacement LED Street lighting 60W, IP66, New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 60W LED 6000K complete all as specified and directed.

S&F in replacement LED Street lighting 90W, IP66, New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 90W LED 6000K complete all as specified and directed.

S&F in replacement driver suitable for 30 watt LED street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 45 watt LED street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 60 watt LED street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 100 watt LED street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 150 watt LED flood street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 120 watt LED flood street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 100 watt LED flood street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 70 watt LED flood street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 250 watt LED flood street light fitting as per existing complete all as specified and directed .

S&F in replacement driver suitable for 400 watt LED flood street light fitting as per existing complete all as specified and directed .

S&F in replacement surge protection device of 10 KA rating compatible with industrial outdoor fitting with rated power upto 150 watts complete all as specified and directed .

S&F in replacement automatic street light switch using Nature Switch for automatic switching of street lights based on LUX level of natural light the sensor (nature switch) along with suitable power contactors and MCBs (Input-output) should be enclosed in pole/wall mountable enclosure made of rust proof, Electric shock proof, termite proof and FR grade SMC junction box (sintex make) conforming to IP 66.the contactor,MCBs and copper circuit wiring (min.16sqmm) should enough to take: three-phase load of 12KW;contactor Rating 80Amps; MCB(spn) Rating 80Amps.MAKE:-Nature switch :Kakatiya energy systems pvt.ltd. hyderabad/bajaj/healer. Contactor:- BCH/L&T/Schneider or equivalent (as per IEC-60947-4-1/IS-13947-4-1), MCBs(Input-output):Hager/ schneider/ L&T/BCH or equivalent (as per IEC-60898/IS-8828),Circuit wiring : Finolex/polycab/RR Kable or equivalent. Model no SWADEEP-66-12KW3P.

Supply and fixing in replacement multi core round PVC insulated aluminium conductor (flexible) industrial cables PVC sheathed , 1100 volts of size 2.5 Sqmm, 3 core from junction box /overhead conductor to street light inside/outside pole complete all as specified.

LAL CONSTRUCTIONS (BID ID -3323411)

M/S RAJ ENGINEERS (BID ID -3322604)

Durga Electricals (BID ID -3321371)

HARSH ELECTRICAL STORE (BID ID -3322713)

Hi Tech Engineers (BID ID -3315939)

M/S S K Electricals Regd (BID ID -3323483)

slathia construction works (BID ID -3323401)

M/S J S ENGINEERS (BID ID -3323182)

VEE ESS ENGINEERS (BID ID -3323464)