REPAIRS/ REPLACEMENT OF WOODEN/ ALUMINIUM DOORS, SKELTON DOORS, PVC DOORS, WINDOWS, VENTILATORS AND OTHER CONNECTED WORKS IN UNDER AGE B/R I AREA AT GE NASIRABAD

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats)/Cooler frame including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 (Gde E-165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. including one shop coat of priming and filling PCC 1:3:6 type C1, complete all as specified & directed.

S&F Pressed steel door frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts(40x3mm) etc. including one shop coat of priming and filling PCC 1:3:6 type C1, complete all as specified & directed.

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F Flush shutters 40mm thick, solid core construction, with block board 3 core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 1991 Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour sheet PVC Sheet reinforced with M.S square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures.

S & F in repairs steel window/ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. NOTE :- Wire mesh and sheet glass shall be measured & paid separately under respective items.

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in fixing of hold fast complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden door/window fixed with wooden bead and pin tacked complete all as specified and directed.

S & F figured glass pin headed type, 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden door/window fixed with wooden bead and pin tacked complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S&F of MS butt hinges 100 mm size (ISI Marked) heavy weight, cold rolled mild steel complete all as specified and directed.

S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F 300mm long aluminium alloy,anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F extruded aluminium handle fabricated type, anodised 150mm size ISI marked complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S&F stainless steel butt hinges, ISI marked of size 100 mm complete all as specified and directed.

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M& L for rendering in cement mortar (1:4), 15mm thick on stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including a coat of 1mm thick wall putty (JK/BIRLA) complete all as specified & directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

Taking down of aluminium door and window from existing frame and replace the glass joining cleat/ glazing clips & rubber neoprene packing of glass and refix the glass in panel, incl refixing the loose stile of door and window with reqd aluminium cleats complete and refix the panel shutter with frame complete all as specified and directed.

Taking down pelmet/ curtain rod any size with rod and bracket fixed to wall complete all as apecified & directed.

S&F fancy type MS curtain rods 22 mm dia powder coated completed all as specified & directed.

S&F decorative type knobs with bracket of MS powder coated fixing at end of pelmet rod complete all as approved by the Engr-In-Charge.

S & F in repair anodised aluminium door shutters, aluminium powder coated section with frame of aluminium section including necessary joining cleats, glazing clips, rubber neoprene packing, brass handle and brass tower bolts of size 150mm x 02 Nos in each door, hinges, anodised aluminium snap beading screws, hydraulically regulated double action floor door spring made up of 1.25mm thick aluminium alloy sheet foundation box for each shutter etc and including fitted with 5mm thick tinned glass in glazed shutter with brass mortice lock 10mm 2 levers , vertical type complete, all as directed.

Repair to steel window/gate for repair for necessary welding, reviting, easing, drilling and replacement of hinges and making then in serviceable condition and refixing in same opening and making good disturbed surfaces complete all as specified and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for walling of random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.

All as per sl item No 40.00 here in before but except stones. Note: Old servieable stones retrieved vide Sl item no 39.00 shall be reused.

M&L for brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Supply & fixing 18mm thick (one side decorative lamination & other side balancing lamination sheet) solid PVC board fixed with screw with cement solvent adhesive for shutter / cup boards / partition wall / wall cabinet and similar work including piano hinges and stainless steel handle complete all as specified and directed.

Supply & fixing 18mm thick (both side plain white colour)solid PVC board fixed with screw, cement solvent adhesive for shutter / cup boards / partition wall / wall cabinet and similar work including piano hinges and stainless steel handle complete all as specified and directed.

S & F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness(as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all height and dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling of ceiling board/lathing any thickness complete all as specified and directed

M&L for aluminium partition in repairs using aluminium sections fitted with 5mm thick tinted glass in upper portion from 3' height as required as per site and 12 mm thick prelaminated particle board both side of standard quality of approved make, any type upto 3' height as required as per site from bottom using glazing clips including jointing cleat for fixing glazing clips, rubber packing anodised aluminium beading etc aluminium tower bolt, floor stoper and locking arrangement by providing latch lock of standard quality of approved make complete all as specified and directed

Dismantling floor, hearth or wall tiles including cement mortar and rubbish off the premises, complete all as specified and directed.

M & L for glazed ceramic coloured tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 10mm thick screed plaster in CM (1:4) complete all as specified and directed.

S&F in repair 5.5mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane for sttel or wooden windows/door fixed with wooden beadand pin tacked complete all as spd & directed.

S&F Deco door seal 1.5" width gate bottom sealing strip draft excluder stopper with aluminium plate and nylon bristles for weather stripping, air sound blocking complete all as specified and directed.

M/s SUNIL ENTERPRISES

M/S SHIVA TRADERS

M/s Jai Jinendra Constructions