C/O MRF SHED 1 ON PLATE FORM OF SWM SITE AT NP NADAUN.

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), includ ing dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, including all lead and lift and other incidental charges complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.10 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including all lead and lift and other incidental charges complete

Providing and laying Centering and shuttering including strutting, propping etc. and removal of form for 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts including all lead and lift and other incidental charges complete

Providing and laying Centering and shuttering including strutting, propping etc. and removal of form for5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers including all lead and lift and other incidental charges complete

Providing laying Steel reinforcement for R.C.C. work including straightening, cutting, bending , placing in position and binding all complete upto plinth level. 5.22.1 Mild steel and Medium Tensile steel bars including all lead and lift and other incidental charges complete

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.3 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including all lead and lift and other incidental charges complete

4.1 Providing and laying Brick work with common burnt clay bricks 2nd class in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand). including all lead and lift and other incidental charges complete

12 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.2 1:4 (1 cement: 4 fine sand) including all lead and lift and other incidental charges complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including all lead and lift and other incidental charges complete

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m² including all lead and lift and other incidental charges complete as per site reqirement

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.12.4.2 0.63 mm thick with zinc coating not less than 275 gm/m² including all lead and lift and other incidental charges complete

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters including all lead and lift and other incidental charges complete

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate including all lead and lift and other incidental charges complete

Sanjeev Kumar

Narinder Soni