Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.3 LAccepted-AOC | 1 | Accepted-AOC lowest bidder | |
| 2 | 2₹5.9 L+₹45,822 (8.43%)Rejected-Finance WARD NO 36 CHAUBEY COLONY NARSINGHGARHPURWA CHHATARPUR MADHYA PRADESH 471001 | CHHATARPUR | MADHYA PRADESH | 471001 | 2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | 3₹6.7 L+₹1.3 L (23.3%)Rejected-Finance ANAND NAGAR ROAD NO 4 RAJAKHEDI MAKRONIA SAUGOR MP | SAUGOR | SAUGOR | MP | 3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | 4₹6.8 L+₹1.3 L (24.3%)Rejected-Finance NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | 4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | 5₹7.1 L+₹1.6 L (29.9%)Rejected-Finance NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | 5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manash Kumar Das AE Civil
AGE I DHANA PIN 470228, DIST SAGAR, MP
REPAIR / REPLACEMENT OF JOINERY AND ALLIED B AND R WORKS IN MD ACCN OF 12 MARATHA AND INF BN NO. 3 AT DHANA MIL STN.
2024_MES_653378_1
8300/DH/10/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I Dhana
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Assistant Garrison Engineer (I) Dhana
₹16,000
Yes
19 Dec 2024
16 Jul 2024
14 Sept 2024
16 Jul 2024
12 Sept 2024
29 Jul 2024
Amount
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and directed
Taking down wooden shutter of any description area exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and as directed.
Taking down shutters of any description exc 1 sq.m and n.exc 2 sqm each and refixing in same opening after repair, complete all as specified and as directed.
S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 125 mm X 60 mm, Profile B, single rebate including hinges, mortar guards, lock strike plate, shock absorbers, complete all as specified and as directed.
M&L for PCC 1:3:6 type C - 1 (using 20 mm graded crushed stone aggregate) as in back filling of chowkats and bed blocks for hold fasts etc, complete all as specified and as directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with partical board, complete all as specified and as directed.
S & F 35 mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of 1st class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24 (b) fitted to chowkhats, complete all as specified and as directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed.
S & F factory made solid PVC moulded door shutter with wood free EPS, 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and as directed.
Supply & fixing Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and as directed.
Fixed in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings or fixed with screws to Iron framed windows, complete all as specified and as directed.
Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws, complete all as specified and as directed.
Supply & fixing 150mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and as directed.
Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and as directed.
Supply & fixing 150mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed.
S & F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia. 100 mm Size, complete all as specified and as directed.
S & F 300 mm size Mild steel stove enamelled helical door spring fixed to Pressed steel frame / chowkhats including necessary welding, complete all as specified and as directed.
S & F prelaminated particle board (decorative lamination on one side and other side balancing lamination), 20 mm thick, grade I or II & type IV (Designation PLB-14 or PLB-24), made out of medium density particle board (flat pressed-three layer or multilayer and graded (grade I or grade II), bonded with BWR adhesive), fixed with screws to timber/ steel frame work for vertical applications as panelling, partitions, cupboard shutter, etc, complete all as specified and as directed.
S & F Block boards 18/19mm thick, grade 2 quality , interior grade , commercial type fixed with screws to timber frame work as in cupboards fixed in repairs, complete all as specified and as directed.
S & F mild steel continuous hinge, 30 mm nominal size, 1 mm thick, type IV as per IS 3818: 1992, bright finish and fixed to cupboard shutter complete all as specified and as directed.
S & F 40mm dia , Cupboard knobs fixed with nut , screw and washer of mild steel , bright finished, complete all as specified and as directed.
S & F mild steel hasps and staples, type -2, wire type, size 100 mm, stove enamelled black finish including fixing with screws, complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.
Supply & fixing sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick, complete all as specified and as directed.
Supply & fixing 3mm thick figured glass, pin head type & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick, complete all as specified and as directed.
M&L for Factory made box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube with double side shutters (Wire Gauged shutter and Glazed Shutter), side hung shutters with MS handles and MS stays dovetailed or welded including 02 nos MS Tower Bolt 150mm long for each leaf, 8 mm square guard bars at spacing as shown in drawings, MS flat iron frame work, MS hinges, tarred hold fast, PCC 1:2:4 type B1 as in bed of hold fast, 01 No. per leaf of stopper of 100mm size, one coat of red oxide zinc chrome primer etc, complete all as specified and as directed. Note : a). Wire cloth and Sheet glass shall be measured and paid seprately under respective items. b). Rate of both type of shutters is inclusive in the quoted rate.
S&F Steel ventilator with top hung shutter including hinges , steel peg stay including taking down old steel ventilator of any size, complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., complete all as specified and as directed.
M & L for brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed.
M & L for Brick work with sub class ‘B’ bricks ,straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6 complete , but except bricks , i.e using serviceable bricks obtained from demolition, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M & L for 75 mm thick plain cement concrete M10 (Nominal Mix) using 20 mm nominal size graded stone aggregates, laid in alternate panel, finished surface even and fair including filling in position with 80/25 industrial grade bitumen mix filler of proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic metre of coarse sand as in plinth protection, complete all as specified and as directed.
Material & labour for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) in floor, sub base, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling , terrazzo topping on walls including cement mortar , bedding (but no backing) removing serviceable tiles and rubbish off the premises, complete all as specified and directed.
M & L for ceramic fully vitrified tiles as per IS 15622: 2017 and IS 13712: 2019, group B Ia, glazed, polished, rectified, of size 600mm x 600mm x 9 to 10 mm thick in floors including 15 mm thick screed bed or bedding layer in cement mortar(1:4) set and jointed in neat cement slurry and pointed in epoxy mortar to match, complete all as specified and as directed.
M & L for ceramic fully vitrified tiles as per IS 15622: 2017 and IS 13712: 2019, group B Ia, glazed, polished, rectified, 600mm x 600mm x 9 to 10mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar(1:4) set and jointed in neat cement slurry and pointed in epoxy mortar to match, complete all as specified and as directed.
M & L for ceramic wall tiles as per IS 15622: 2017 and IS 13712: 2019, group B III, glazed, unpolished, rectifiedof size 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in epoxy mortar to match, complete all as specified and as directed.
M & L for ceramic floor tiles as per IS 15622: 2017 and IS 13712: 2019, group B IIa, anti-skid, glazed, unpolished, rectified, area of each tile exceeding 0.04 sqm but not exceeding 0.12 sqm, length less than 360 mm, minimum 7 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:4) set and jointed in neat cement slurry and pointed in epoxy mortar to match, complete all as specified and as directed.
M & L for 18-20mm thick black Granite stone machine cut laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, jointed in grey cement with addmixture of pigment to match the shade of granite stone including cutting, polishing and half rounding of exposed edge of stone, complete all as specified and as directed.
M & L for cement concrete M-7.5 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate 100 mm thick in sub base for laying tiles, pavings, floorings etc, complete all as specified and as directed.
Taking down cement plaster on bricks or stone wall / ceiling decayed surfaces of concrete , roof projections or chajjas etc upto triple storey including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 finished even and fair, complete all as specified and as directed.
Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.
Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams, complete all as specified and as directed.
S&F in repair Bib taps 15mm dia cast copper alloy fancy type chromium plated, screwed down for iron pipe or for brass ferrule fixed, complete all as specified and as directed.
S&F in repair Angle valve 15 mm fancy type, chromium plated 15 mm of cast copper alloy, screwed down for iron pipe, complete all as specified and as directed.
S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe, complete all as specified and as directed.
S & F in repairs drapery rods (curtain rods) of 20 mm outer diameter, designed on electric resistance welded mild steel pipe having a corrugated virgin PVC extrusions reinforced to minimize friction and eliminate scratches with colour matching brackets and finials etc. of approved colour /shade/design wherever necessary with anchoring arrangements, complete all as specified and as directed.
Preparation of new plaster surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whiting with wall care putty, complete all as specified and as directed.
Preparation of new plaster surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.
Preparation of newly plastered surfaces/boards on ceilings and applying three coats of white wash, complete all as specified and as directed.
Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer, complete all as specified and directed.
Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.
Preparation of old plastered or un plastered surfaces of walls and applying one coat of cement base paint on walls, complete all as specified and as directed.
Preparation of old plastered or un plastered surface including brooming down or steel wire brushing, scraping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white wash on walls, complete all as specified and as directed.
Preparation of old plastered or un plastered surface including brooming down or steel wire brushing, scraping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white wash on ceiling, complete all as specified and as directed.
Material & labour for preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Material & labour for preparation of old steel based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 15,490.00 /- ]
m/s mahendra kumar khare contractor (BID ID -3086577)
Pandey Construction and Engrs (BID ID -3086357)
siddhant construction (BID ID -3094209)
M/S JAINENDRA KUMAR JAIN (BID ID -3085545)
M/S Sai supplier (BID ID -3085311)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .