Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹41.3 L+₹54,367 (1.34%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹41.6 L+₹91,812.50 (2.26%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹41.7 L+₹96,335 (2.37%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹42.0 L+₹1.3 L (3.15%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF BOUNDARY CULVERT COMPOUND RETAINING WALL AT NE ZONE AT RMS UNDER AGE BR I
2023_MES_599305_1
8554/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹80,000
27 Jun 2023
29 May 2023
19 Jun 2023
29 May 2023
17 Jun 2023
10 Jun 2023
29 May 2023 - 5 Jun 2023
Amount
Demolition of brick work/stone boulder built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level.complete all as specified and as directed.
Demolition of reinforced cement concrete in any position not other wise described etc complete all as specified and as directed.
Dismantling mild steel work including bracing, balusters, sheet clading like other etc. as directed by Engr in Charge.
M & L for providing, cement concrete type B1, (1:2:4) using 20 mm graded stone aggregate as bond stone incl necessary form work complete all as specified and directed.
M&L for pre cast cement concrete PCC 1:3:6 type C 1 using 20 mm graded stone aggregate in coping incl necessary form work etc complete all as specified and directed.
M&L for random rubble uncoursed stone walling well bounded, bedded and solidly hearted built in cement mortar 1:4, etc complete all as specified and as directed.
,-do- but except stone etc complete all as specified and as directed.
M&L for Raised pointing to random rubble uncoursed stone masonry in CM 1:4 etc complete all as specified and as directed.
M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches / floor / weep holes, fixed to walls complete all as specified and directed.
Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan soft of soil and getting out etc complete all as specified and as directed.
M&L for PCC Type C-2 (1:3:6) using 40mm graded stone aggregate as in foundation ,mass concrete, etc complete all as specified and as directed..
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
All as per ser No 13 here in before but except bricks etc complete all as specified and as directed.
M&L in repair for 35 mm thick pre-cast RCC jalli including moulding cement concrete 1:2:4 type B-0 using graded stone aggregate set in CM 1:4 complete all as specified and directed.
RCC (1:2:4) type B-1 using 20mm graded stone aggrgate as in band, coping, bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.
M&L for RCC nominal mix 1:2:4 type B1 for slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like using 20mm graded stone aggregate etc complete all as specified and as directed.
M&L for mild steel TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT bars etc complete all as specified and as directed.
ditto but 8mm dia for stirrups etc complete all as specified and as directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exceeding 200 mm thick (Horixontal or sloping) and similar work complete all as specified and directed
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4 all as specified and directed
M& L cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains including necessary formwork etc complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms,mitred stopped ends etc complete all as specified and as directed.
M&L for Precast RCC (1:2:4) type B-1 in drain slab cover etc incl necessary formwork complete all as specified and directed.
Taking down cement plaster, raised pointing of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement etc complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement etc complete all as specified and as directed.
Supply only integral water proofing compound etc complete all as specified and as directed.
M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces etc complete all as specified and as directed.
M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed .
M&L for preparation of new external surfaces of wall incl cornices, pillaster etc (Plastered or unplastered surfaces) and applying two coats of cement paint over one coat of primer complete all as specified & directed .
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.
M&L for complete removal of existing treatment of plastered surface of wall and apply two coats of cement base paint complete all as specifed and as directed.
Demolation and breaking up drain pipes (Salt glazed stoneware, AC or Reinforced concrete) set in cement mortar 300 mm dia fixed in position etc complete all as specified and as directed.
M&L reinforced concrete pipes, class NP-2, 300 mm dia laid and jointed complete with collars complted all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone agg as in sub floors, sub bases, floors and paving finished even and smooth without using extra cement etc complete all as specified and as directed.
S&F for mild steel work in post and struts in fencing including cutting tips to shape as directed drilling holes notching for wire etc including flat iron fillets for securing wire mesh etc including all neessary drilling bolting or riveting etc and similar work conforming to Fe -290 Gde E-165 etc complete all as specified and as directed.
S&F in repair mild steel nuts and bolts with washers of lengh of bolt exc 5cm but n exc 10 cm and dia of neck 11 to 15mm machine made suitable for fixing of MS plate angle bracing etc complete all as specified and as directed.
S & F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbed at 75 mm spacing s and straing and fixing to any type of standard rail strain -ing Bolt , including, securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pine etc including dismantling the old barbed wire, complete all as specified & directed
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil etc complete all as specified and as directed.
Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point etc complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier etc complete all as specified and as directed.
Hacking out old brocken glass of any thickness size or description from wooden frames, metal frames and stainless steel frame fixed with wooden beads/putty etc complete all as specified and as directed.
S&F 12mm thick polished toughened clear glass with full glass itchin with Corps formation sign colour ( white or coloured), best quality square exc 0.50 sqm each panes, fixed to and including steel frame fancy type etc complete all as specified and as directed.
M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint as etc complete all as specified and as directed.
M/S SANGITA TRADERS
SHRI HRIDAY NARAIN GIRI
MS SADHNA RAHUL
MM Dhar Enterprise
PERFECT BUILDERS AND SUPPLIERS
SK SINGH
M/S Lucky Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .