SPL REPAIR TO BLDG NO T-32 AT 50 (I) PARA BDE PRO UNIT AND SPECIAL REPAIR TO BLDG NO P- 37 (DINING HALL, COOK HOUSE AND GYM HALL) OF 622 PARA COY ASC (COMP) UNDER GE (WEST) AGRA

Amount

Taking down chowkats or frames (w/o taking off shutters) from the frames n.exc 1.5 Sqm each complete all as specified and directed by Engineer -in charge.

All as per item No 1 above but chowkat or frames exc 1.5 Sqm but n.exc 4 sqm each)complete all as specified and directed by Engineer -in charge

M&L pressed steel frames 125 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate,etccomplete all as specified and directed by Engineer -in charge

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engineer -in charge

S&F flat iron as in bands, straps, hold fasts; wall ties and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer -in charge

35 mm thick 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer -in charge.

S&F 30mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of the framing plain, chamfered rounded, fitted with cut & mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Engineer -in charge

S & F steel windows with side hung shutters with using 'Z' steel section without glazing bars including projected box type hinges, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters using seel section with glazing bars including projected box type hinge, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S & F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay complete all as specified and directed.

S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification given in SSR part-II (2020) complete all as specified and directed by Engineer -in charge.

S & F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame .Incl 3 Nos PVC hinges100 mm long , 2Nos aluminium handle 150 mm long and 2 Nos aluminium tower bolt 200 mm long fixed to each shutter at site as per specification in clouse No 8B.2 at SI page No.143 to 144 and shown in drawing on SI page No 156 of SSR 2020 complete all as specified and directed by Engineer -in charge..

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including distrub surfase of existing position complete all as specified and directed by Engineer -in charge.

M&L for PCC 1:3:6 Type C-0 (using 12.5 mm graded stone aggregate) as in back filling hollow portion of pressed steel door frame. complete all as specified and directed by Engineer -in charge.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer -in charge.

S&F 300 mm lomg aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer -in charge.

S&F aluminium anodized barrel tower bolt of extruded section, 200 mm long complete all as specified and directed by Engineer -in charge.

S&F aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as specified and directed by Engineer -in charge.

S&F aluminium anodized handle cast type 150 mm long complete all as specified and directed by Engineer -in charge.

S & F 300 mm long MS ordinary rat tail spring including roller and roller plate complete all as specified and directed by Engineer -in charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer -in charge.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer -in charge.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or with staples complete all as specified and directed by Engineer -in charge.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or with staples complete all as specified and directed by Engineer -in charge.

M&L for preparation of new or previously untreated wooden surfaces over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer -in charge.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer -in charge.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer -in charge.

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre complete all as specified and directed by Engineer -in charge.

All as per item No 29 but except material complete all as specified and directed by Engineer-in-charge.

M&L 4mm thick non asbestos fibre cement building design boards in ceiling flat or sloping fixed or laid/ inserted to timber/GI/Aluminium framework with screw. complete all as specified and directed by Engineer -in charge.

All as per item No 31 but except material complete all as specified and directed by Engineer-in-charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges , etc complete all as specified and directed

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer -in charge.

S&F pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer -in charge.

Dismantling timber scantlings 40 Sq. cm and over in section and in any position complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer -in charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed by Engineer -in charge.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410W(GdeE-250) quality B .complete all as specified and directed by Engineer -in charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E 165)complete all as specified and directed by Engineer -in charge.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer -in charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, eachscrewed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 22.5cm and n exc 30cm and diameter of neck 16mm to 20mm.complete all as specified and directed by Engineer -in charge.

Demolition of cement concrete ( unreinforced) in gd floor and paving n.exc 15 cm thickness below or above the gd level complete all as specified and directed by Engineer -in charge.

M & L for Machine cut & polished smooth surface of kota stone slab 20-25mm thick as in flooring, including 20 mm thick cement mortar screed bed 1:6 fix in position etc complete all as specified and directed by Engineer -in charge.

M & L for machine cut & polished smooth surface of kota stone slab 18-20mm thick as in skirting, including 15 mm thick cement mortar screed bed 1:4 fix in position etc complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm dia decorative powder coated drapery rod, colour as approved with seasoned teak wood rings and brackets, fix to wall concrete complete all as specified and directed by Engineer -in charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed by Engineer -in charge.

M&L brick work with subclass ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer -in charge.

All as per item No 47 but except brick straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified .

M&L brick work with subclass ‘B’ bricks,straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified .

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer -in charge.

M&L for 15mm thick rendering in CM 1:6 on surfaces of wall finished surface fair & even complete all as specified and directed by Engineer -in charge.

M&L for rendering 15 mm thick on fair faces of concrete/ brick surface wall in cement mortar 1:4 with wpc, finished fair and even complete all as specified and directed. Note:- WPC shall be measured and paid separately complete all as specified and directed by Engineer -in charge.

Supply only integral water proofing compound (Liquid) complete all as specified and directed by Engineer -in charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engineer -in charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1mm thick complete all as specified and directed.

M&L for applying two coats of oil emulsion distemper over a coat of wall care putty of 1mm thick on old decorated surface including complete removal of existing treatment complete all as specified and directed by Engineer -in charge.

M&L for applying two coats of cement based paint on old decorated surfaces including preparation and complete removal of existing treatment complete all as specified.

M & L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description having width/girth exceeding 10cm complete all as specified and directed by Engineer -in charge.

M&L for cement concrete 1:3:6 type C-1, (using 20mm graded stone aggregate) , in plinth protection 50mm thick finished even and smooth without using extra cement including making joint 12 wide to the full depth of PCC at max 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed by Engineer -in charge.

Dismantling water tanks and removing to store capacity of water tank exc 500 & n exc 1000 litres. complete all as specified and directed by Engineer -in charge.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres. complete all as specified and directed by Engineer -in charge.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engineer -in charge.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engineer -in charge.

M&L for coloured glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete all as specified and directed by Engineer -in charge.

M&Lvitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6complete all as specified and directed by Engineer -in charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed by Engineer -in charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed by Engineer -in charge.

M&L for GI tubing 15mm dia medium grade with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer -in charge.

All as per item No 70 above but 20mm dia complete all as specified and directed by Engineer -in charge.

Fixing only tubes any grade with all fittings fixed complete to wall and ceiling or laid in floors 15mm diacomplete all as specified and directed by Engineer -in charge.

All as per item No 72 above but 20mm dia complete all as specified and directed by Engineer -in charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer -in charge.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors 75mm dia. complete all as specified and directed by Engineer -in charge.

All as per item No 75 as above but 110mm dia complete all as specified and directed by Engineer -in charge.

M&L for PVC (SWR) bends any radius of 75mm dia with oval and access door complete all as specified and directed by Engineer -in charge.

All as per item No 77 as above but 110mm dia complete all as specified and directed by Engineer -in charge.

M&L PVC (SWR) branch piece single Y equal or unequal of 75mm dia with access door complete all as specified and directed by Engineer -in charge.

M&L PVC (SWR) branch piece single Y equal or unequal of 110 mm dia with access door complete all as specified and directed by Engineer -in charge.

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed by Engineer -in charge.

S&F in repairs vitreous china wash hand basin white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engineer -in charge.

S&F in repair vitreous china wash down water closet (pedestal pattern) white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line complete all as directed.

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including, PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and remocal of old WC seat unhygienic condition) complete all as specified and directed by Engineer -in charge.

S&F in repair PVC (SWR) P trap 110 mm bore complete all as specified and directed by Engineer -in charge.

S&F in repair PVC (SWR) S trap 110 mm bore complete all as specified and directed by Engineer -in charge.

S&F in repair PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets,CP brass flush pipe and bend complete all as specified and directed by Engineer -in charge.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed by Engineer -in charge.

S&F in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed by Engineer -in charge.

S&F in repair stop valve cast copper fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed by Engineer -in charge.

S & F in repair pillar tap 15 mm dia cast copper alloy fancy tpye with capstan heads chromium pleted screwed down high pressure with or without lettered Hot or Cold with long screwed screwed shanks and fly nuts screwed for iron pipe fixed. complete all as specified and directed by Engineer -in charge.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges. complete all as specified and directed by Engineer -in charge.

S&Fin repair brass chromium plated shower rose repair 125 mm size with or without swivel joint complete all as specified and directed

M&L rubbing and polishing of existing kota stone flooring and skirting complete all as specified and directed by Engineer -in charge.

M&L pre-polished, machine pressed chequred cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with mixer of white cement &pigment as in floors / pavements / paths. paths laid over screed bed or bedding layer in cement mortar 1:4, 20 mm thick for laying floor finishes. complete all as specified and directed by Engineer -in charge.

M&L 25 mm thick cement concerte type B-1, 1:2:4 (using 20 mm graded aggregate) as in leveling of sub base. complete all as specified and directed by Engineer -in charge.

M&L for 18/19 mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work. complete all as specified and directed by Engineer -in charge.

S & F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) 30 mm. complete all as specified and directed by Engineer -in charge.

M&L for 2nd class hard wood plain fillets.square,rectangular or triangular in section, wrought, secured with nails or brads, sectional area n. exc. 3 Sqcm. complete all as specified and directed by Engineer -in charge.

S & F brass cup board lock 75mm size 4 levers with duplicate keys complete all as specified and directed by Engineer -in charge.

S & F aluminium handles, cast type,anodised 100 mm size complete all as specified and directed by Engineer -in charge.

M&L for french polishing on surface of any description including cleaning and preparing the surface with a coat of wood filler and two or more coats of french polishing till the desired finish is obtained complete all as specified and directed by Engineer -in charge.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer -in charge.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engineer -in charge.

Taking down roof truses, coupled rafters or trussed beams clear span above 4 mtr & upto 8 mtr complete all as specified and directed by Engineer -in charge.

Housin and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc complete all as specified and directed by Engineer -in charge.

M & L for second class hard wood clean sawn timber framed and fixed in scantling, roof truss,and rafters complete all as specified and directed by Engineer -in charge.

M & L for preparing surfaces of wood and wooden based materials new or old any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed by Engineer -in charge.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint including preparation of old steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed by Engineer -in charge.

M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching,coping , roof kerbs, mud stop, padding etc and similar work complete all as specified and directed by Engineer -in charge.

Preparing old or un plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed by Engineer -in charge.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L for complete removal of existing treatment with mechanical device of old plastered surfaces of wall and applying two coat of white wash (match with new surface) complete all as specified and directed by Engineer -in charge.

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer -in charge.

M & L cutting holes into or through brick wall built in cement mortar superfacial area exc 150 Sqcm not exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed by Engineer -in charge.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified and directed by Engineer -in charge.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and Including rigid PVC conduit medium grade, concealed on wall portion and with stove enameled steel conduit medium grade on steel structural truse/ RCC roof ceiling portion surface type fixed with sadlles, screwes as per Engr practices of suitable size but not less than 20 mm bore with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified and directed by Engineer -in charge.

All as per item No-118 here in before but One socket outlet 5/6 Amps on independent bd controlled by one switch complete all as specified and directed by Engineer -in charge.

All as per item No-118 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified and directed by Engineer -in charge.

All as per item No-118 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 2 to 6 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings likeswitches,sockets,regulators ,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed by Engineer -in charge.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed by Engineer -in charge.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed by Engineer -in charge.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed by Engineer -in charge.

S&F switch, bell push button, single pole, 5/6 Amps, one way, 230 Volts complete all as specified and directed by Engineer -in charge.

S&F for ceiling rose surface bakelite 50 x 25 mm size 3 terminals complete all as specified and directed by Engineer -in charge.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed by Engineer -in charge.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified and directed by Engineer -in charge.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified and directed by Engineer -in charge.

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed by Engineer -in charge.

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts IK-08 As per IEC 61439-3 complete all as specified and directed by Engineer -in charge.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified and directed by Engineer -in charge.

Supply & fix, surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically ultra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittingscomplete all as specified and directed by Engineer -in charge.

Supply & fix, outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified and directed by Engineer -in charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer -in charge.

Supply & fix surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly, altra modern energy saving , decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified and directed by Engineer -in charge.

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified and directed by Engineer -in charge.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length complete all as specified and directed by Engineer -in charge.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length complete all as specified and directed by Engineer -in charge.

Taking down distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces complete all as specified and directed by Engineer -in charge.

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 200 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed by Engineer -in charge..

Supply and fix MCCB 4 pole 100 to 125 Amp Icu 16 Kilo Amp and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release suitable for fixing in VTPN DB complete all as specified and directed by Engineer -in charge. .

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed by Engineer -in charge.

Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer -in charge.

Supply & fix MCB SP, 2 to 4 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified and directed by Engineer -in charge. (for light circuit)

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified and directed by Engineer -in charge.. (for equipment & power circuit)

M & L earthing complete in replacement with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .complete all as specified and directed by Engineer -in charge.

M&L for electrically disconnecting and taking down existing ceiling/Exhaust fans from any hight or in any position from existing bldg and keeping in safe custody for reuse at site after necessary repaire/ servicing & painting with one coat of synthetic enable paint and re hanging/ re-fixing in original position but including replacement of three cor flexible copper conductor cable from ceiling rose to fan connector block of soze 0.75 Sqmm and hanging fan clamps, nuts, bolts and rubber reel bush etc & testing for proper functioning complete all as directed at site by Engr-in- Charge

Supply laying, commisioning & testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed by Engineer -in charge.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed by Engineer -in charge.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.

Supply and fixing in replacement GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and directed by Engineer -in charge.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure, complete all as specified and directed by Engineer -in charge.,.

VAKRATUNDA CONSTRUCTION CO

CREATIVE CONSTRUCTION

Attar Singh and Sons

M/S SHRINATH CONTRACTION

M/S SHARADA ASOCIATE

M/s Srijan Construction Company

M/S VIDIT ENTERPRISES

M/S RAJENDRA KUMAR AGARWAL

M/S J J ENTERPRISES