Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.3 LAdmitted-Finance | +0.00% | ₹1.3 L | L1 | Admitted-Finance |
| 2 | L2₹1.3 L+₹3,225.24 (2.55%)Admitted-Finance | +2.55% | ₹1.3 L+₹3,225.24 (2.55%) | L2 | Admitted-Finance |
| 3 | L3₹1.3 L+₹5,501.88 (4.35%)Admitted-Finance | +4.35% | ₹1.3 L+₹5,501.88 (4.35%) | L3 | Admitted-Finance |
Tender Value
₹1.3 L
EMD Value
₹2,530
Closing Date
28 Jul 2026, 5:00 pmClosed
EXECUTIVE ENGINEER (CENTRAL)
5, S. N. BANERJEE ROAD, KOLKATA-700013
INSTALLATION LINK CONNECTION OF NEWLY INSTALLED TUBE-WELL WITH PIPELINE AT KASAIPARA IN WARD NO.60.
2026_KMC_1032435_1
KMC/WS-CENTRAL/HPL/03/2026-27
Open Tender
CIVIL WORKS
Percentage
kolkata
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹2,530
Yes
18 Aug 2026
20 Jul 2026
31 Jul 2026
20 Jul 2026
28 Jul 2026
20 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. | 62.5 | CUBIC METER PERCENT | 119.27 | ₹7,454.38 |
| 2 | Cutting & picking up existing metalled black top portion of road surface to an average depth of 300 mm by using Jack hammer with all necessary tool and plant including reening the serviceable materials & stacking within a lead of 75 mtr. all complete as per direction of the Engineer-in-Charge. | 37.5 | CUBIC METER | 636 | ₹23,850 |
| 3 | Lowering any type of Ductile Iron (DI) pipes & specials and laying along trench at any depth as per speclfication and direction of the Engineer-incharge, ( laying over ground. the rates shall be, reduced by 10% and the rates so reduced shall be inclusive of cost of all sorts of holding arrangements]Diameter in mm 100mm dia. | 120 | %METER | 14 | ₹1,680 |
| 4 | Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 100mm dia. | 9 | EACH | 461 | ₹4,149 |
| 5 | Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]100mm dia. | 3 | EACH | 986 | ₹2,958 |
| 6 | Cutting of C.l/D.I pipes for fitting with pipes and-or specials of similar or dissimilar materials at the time of laying without damaging any part of the required length including taking out of the broken pieces from the trench and restacking the same at the specified location as per direction of the Engineer-in-Charge. Diameter in mm 100mm dia. | 3 | EACH | 91 | ₹273 |
| 7 | Chamfering the spigot end of C.l./D,l. pipes for fitting with the socket of C.I./D.I pipes and/or specials in tyton jointed water mains or otherwise using electric grinder as per specification and direction of the Engineer-in-Charge. Diameter in mm 100mm dia. | 6 | EACH | 74 | ₹444 |
| 8 | All types of Ductile Iron (D.I) Specials (viz. Bend. Tee. Taper. Tail piece etc), size
conforming to I.S. Specification No. 9523/2000 with cement mortar lining (inside) and bituminous coating (outside). (25% of payment will be held up till successful hydraulic testing) a) All Socket Tee 100 mm to 300mm dia.. | 75 | KILOGRAM | 128 | ₹9,600 |
| 9 | All types of CIspecials (viz. Bend. Tee. Teper. Tail piece. Collar. Bell mouth with Puddle coller etc. size conforming to IS specification 1538: 1993) b) Flanged socket spigot
i) 80mm to 300mm | 135.8 | KILOGRAM | 63 | ₹8,555.4 |
| 10 | Cost iron double flanged manually operated sluice valves generally conforming to IS 14846:2000, having four faces and spindle nut of gunmetal. Inside screw non- rising type quality gunmetal /AISI 410 spindle: seat tested to 10kg/CM... and body tested to 15kg/CM..., flanges flat faced and drilled to 1.S.: 1538:1993. Painted black all over with asphalt base paint. Valves tested by closed end method. NB Diameter in mm 100 | 3 | EACH | 5,067 | ₹15,201 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.37 MB
TECHBID.pdf
Tender Documents • 1.42 MB
BOQ_2535450.xls
BOQ • 0.30 MB
PRICEBID.pdf
Tender Documents • 1.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .