WBPWD/AE/DESD /eNIQ-19/2025-26

Amount

A. PBDB, BDB, & other related items

Supplying and fixing 2+4 Way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/Siemens/schneider ) [ 13 / D- 9 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS ( Make - Legrand/Siemens/schneider )

6-32 A SP MCB [ 7 / D- 6]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS (incoming isolator of SPN DB) ( Make - Legrand/Siemens/schneider )

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (KEI/ RRcable/ Mescab) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Make-Legrand myrius or similar) fixed on modular GI switch board complete with 2 no. “Ph & N” copper bar with top cover plate making earthing attachment, and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]-Avg run 10 mtr [ 4(e) / E -25]

on board plug point with 5A 3/5 pin modular type plug socket [ 4(a) / E -15]

C.Plugs & sockets/power unit

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (make-Legrand-Myrius) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

D.Supply & Laying of different rated LT Cables

Supply of 1.1 kv grade 2/4 Core XLPE / PVC Insulated & Sheathed Armoured Al. Conductor cables of following sizes [ Make Havells/ Polycab/KEI/Glowstar]

4 core 150 sq.mm [ NS ]

2 core 6 sq.mm [ NS ]

Laying of cable upto 35 sqmm in underground trench as per GS for the following numbers of Cables.

1 no. cable [ 1(a)/ F- 2 ]

Laying of cable above 35 sqmm upto 185 sqmm in underground trench as per GS for the following numbers of Cables.

1 no. cable [ 1(a)/ F- 2 ]

Laying of cable after cutting floor/pavement/wall incl. 2 nos. 10 SWG GI wire as per GS for the following Sizes.

2.5 to 35 Sq. mm [ 5(i)/ F- 3 ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE armoured cables as below and fininshing the end of the cable by means of crimping method as to G S.

a) 4 core x 150 sq mm

b) 2 core x 6 sq mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. S&F solderless socket etc.

a) 4 core x 150 sq mm

b) 2 core x 6 sq mm

S&F of required size solderless Cu socket of following Cu wires.

c)2.5Sqmm [ 9(i) /F5]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

80 mm dia [ 11(e) /F-6]

E.Fittings & Fixtures and Earthing installation

S&f 18/20 W Single Tube LED Light Fittings (make Philips/ Crompton/Magik) with 1 x 18 watt 2100 lm 1200 mm long PC Body retrofit type tube light with box type metallic fittings as approved by PWD. [NS]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mm x 125 mm ) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [ 17 / C-2]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) [1(a)/G-1]

Add GST @18% On total from item no 1 to 23

Add LWC @1% On total from item no 1 to 24

SADHAN ELECTRICAL ENTERPRISE (BID ID -7769176)

DEEP ENTERPRISE (BID ID -7769132)