Equipment

Door : 1 Solid, Shelves : 2, Dimensions (W × H × D) : 438 × 680 × 589 mm Voltage : 230 V / 50 Hz Temperature Range : 50ºC to 250ºC Temperature Uniformity (Spatial Deviation) : ≤ ± 4ºC at 150ºC Temperature Accuracy & Uniformity : ≤ ±0.4ºC at 150ºC & ±4.5ºC Temperature Sensor : PT100 Standard access port for external sensors : To enable independent sample temperature monitoring without disturbing chamber hermeticity.Display : Display for time, temperature and alarms Time Setting : ON/OFF time setting Ventilation / Air Exchange : 18 h⁻¹ Heating Power : 14 Amp Power Consumption : 320 W Recovery Time : 9 mins (work space unoccupied, door open for 30 s, to set temperature) Safety : Safety over-temperature alarm Temperature Stability : ≤ ±0.4ºC at 150ºC Air Convection Technology : Gravity convection Usable Space : Approximately 176 Liters Automatic Over-temperature Alarm : Automatic over-temperature alarm without need for manual setting Interior Surface Material : AISI 430 / 1.4016 grade stainless steel Interior Surface : Stainless steel Chamber Design : Rounded corners for easy cleaning and to avoid contamination Shelf System : Easy to fit and remove easily with one hand and without the use of tools User Interface : Microprocessor controlled Display Type : Large vacuum fluorescent display Control : Touch button control Controller : ON/OFF timers Heat-up Time : 25 min (work space unoccupied, from 25°C to 98% of set temperature of 150°C) Standard Shelves : 2 shelves as standard Maximum Shelf Capacity : Capable of accommodating a maximum of 19 shelves Shelf Load Capacity : 25 kg Damper : Manually controlled damper opening for venting out chamber air Access Port : Access port for independent monitoring of sample temperature at the back side of the unit Rapid Heat-up : Function for rapid heat-up of chamber interior Door Opening : 180º angle for complete access to chamber interior Communication Interface : RS 232 Interface Warranty : 1 year Operating Supply : 230 V / 50 Hz Accessories : Additional wire mesh shelf. Stand with casters for stacked units. Fresh air particle filter. Silicon-free VITON door sealing. Laboratory shell grinder Factory Installed Options : Left hinge door; additional access ports on left or right side or on top Standard Compliance : EN 61326-1 : 2013; EN 61010-1 : 2001;EN 61010-2-010 : 2003; EN 50581 : 2012 CE Certification : CE Certificate Compliance Certification : Certificate of Compliance Quality Certification : ISO 13485 : 2016 Manufacturer Website : All the above specifications must be available on the manufacturer's website Government Users : At least 10 government users list with contact number and email ID to be provided Service Station : Principal company service station must be available in Tamil Nadu Service Station Documentation : Address proof for the Tamil Nadu service station to be provided