Repairing (Building Part, Furniture and Miscellaneous work) of New Professional College, Jamshedpur

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i. e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium window, ventilator shutters etc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness

Providing and fixing glazing in aluminium door, shutters etc. with PVC/neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5.50 mm thickness

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.. (Approved Brand - GODREJ/ DORSET)

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both direction with wire of dia. 0.50 mm all complete.

With 12 mm mild steel U beading

Providing and fixing 100 mm brass Locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stoppers ISI marked anodized (anodic coating not less than grade Ac 10 as per I.S. 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing curtiain rod of 1.25 mm th. chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brrass screws and wode plugs, etc. wherever required.

Providing and fixing alluminium sliding door bolt anodised (anodic coating not less than grade AC10 (as per IS 1868) transparent or dyed to required color and shade with nuts & screws etc. complete.

250X16 mm, FOR CUPBOARD

Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 Parryware/ Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing Wash basin with C.I/M.S brackets, 15mm C.P. pillar cock 32mm C.P brass waste of cutting and making good the wtherever require.

Falt back wash basin size 630X450 mm with a single 15mm C. P. pillar tap.

Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.

Providing and fixing PTMT swivelling shower,15mm nominal size, 95mm long, 65mm dia. of approved quality, color & make weighing not less than 40 gms with approximate 80 holes of 1.2 mm dia.

Providing and fixing PTMT towel rail complite with brackets fixed to wooden cleats with c.p.brass screws with concealed fitting arangement of approved qualite colour and make.(Prayag or equipment)

17.73.1 450mm long towel rail with total elgnth of495mm,78mmwide and effective hight of 88mm, weighin not less than 170gms.

Providing and fixing white vitreous china flat back half stall urinal of 580X380X350mm with white PVC automatic flushing cistern, parryware/Hindware with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass with waste fitting as per IS : 2566 P.V.C. trap with outlet grating and other couplings in C.P. brass including parenting of fitting and cutting and making good the walls and floors wherever required..

Single half stall urinals with litre P.V.C. auotmatic flushing cistern

Providing and fixing C.P. brass bib cock of approved conforming to IS 8931

15mm nominal bore approved brand C.P. fittings

Providing and fixing C.P.brass long body bib cock of approved quality conforming to standard and weight not less thain 810gms.

15mm nominal bore approved brand C.P. fittings

Providing and fixing C.P. brass angle valve for basin mixer, gyser & others points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings.

Providing and fixing C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )

32MM nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.

20mm nominal bore

25mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required:

17.10.2 kitchen sink without drain board

17.10.2.1. - 610x510mm bowel depth 200mm

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality.

15 mm nominal bore with 45 cm length.

Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible Pipe

Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sqmm earth wire

2x2.5 Sqmm + 1x2.5 sq mm earth wire

2X 6 sq mm + 1X 6.0 sq mm earth wire.

4X 6 sq mm + 2X 6.0 sq mm earth wire.

4X10 sq mm + 2X10 sq mm earth wire.

4X16 sq mm + 2X16 sq mm earth wire.

4X25 sq mm + 2X16 sq mm earth wire.

Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required .

Single pole

32A Single pole and neutral

32A Triple pole and neutral

40A Triple pole and neutral

63A Triple pole and neutral

a) Installation testing and commisioning of prewired, flourescent fitting, of all type complete with all accessories and tubes etc .including supplying and fixing ball and socket arrangement ,2no down rods of 20 mm dia steel.

Suppling and fixing following moduler switch / socket on the existing moduler plate & switch box including connection but excluding moduler plate etc. as reqd.

5/6 amps one way switch

5/6 amps socket outlet

15/16 amps one wayswitch

Telephone socket outlet

Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface / recessed PVC conduit as required.

2 x 1.5 sq mm

S/F of call bell buzzer.

Suppling and fixing moduler type electronic fan regulator.

Suppling and fixing moduler type blanking plate.

Providing ,Laying & drawing of 3.5 x 300 sq mm A.L . A r. cable .

Providing ,Laying & drawing of 3.5 x 120 sq mm A.L . A r. cable .

Laying of Cable including excavation ,sand cushioning ,protective covering and refilling the trench as required. .

Laying of Cable with clamped with 25xm mm MS clamp etc as required.

Providing and fixing 50mm x 5 mm copper strip on surface for connection etc. as required.

Providing and fixing C.P. brass Health Faucet including 450 mm long Braided Hoses with all fittings complete job.

Hand Shower

Providing and fixing c.p. JET SPRAY in comde.

Providing and fixing of 1 x 28w tubelight fixture.

Providing and fixing of 2 x 28w tubelight fixture with pre- anodised aluminium reflector.

Providing and /Fixing of surface type LED 6w BOLT ROUND fixture

Providing and /Fixing of surface type LED 12w BOLT ROUND fixture

Providing and /Fixing of surface type LED 18w BOLT ROUND fixture

Providing and /Fixing of recessed type LED 36wENDURA FLAT PANEL fixture

Providing and /Fixing of recessed type LED 18wENDURA ULTRA SLIM

230 mm sweep A.C. Exhust fan / freashair fan of Model Ventil Air DS

300 mm sweep A.C. Exhust fan / freashair fan of Model Ventil Air DS

1200 mm sweep A.C ceiling fan suitable for 250 volts 50Hz complete Model SS 390 Havels Make or equivalent approved make

Providing and /Fixing of Endura Bay brite 80W LED 6000K light with lamp and accessories.

Providing and /Fixing of ENDURA WELL GLASS 40W LED 6000K fixture with all acessories.

Providing and Fixing of recessed type LED 7w 3000K fixture with all asso.

Providing and fixing of 400 mm sweep A.C wall fan suitable for 250 volts 50Hz complete

Providing and /Fixing of 18w/20w CFL lamp

Providing and fixing of LED LUMENO 10W B22 CDL BALL LAMP

11 kv VCB PANEL

Supply installation ,testing and commissioning of outdoor extesible cubical type floor mounting HT 630A 25 KA VCB panel suitable for 3phase 50 Hz supply system including CT.PT copper feeder and all protective element complete with all accessories etc as required.

Supplying of following size XLPE armoured electrical cable with aluminium conductor for working voltage upto 11 KV volts.(Conforming to IS 7096/Part III

3C X95 SQ MM

Providing and fixing puff-up 1.5" dia. Nozzle Sprinkler in garden

Fabricating, supplying, installation, testing and commissioning of weather proof feeder pillar in position on suitable plateform of brick masonary in 1:6 with neat finish cement plaster having suitable size of channels for mounting feeder pillar, the feeder pillar is to be fabricated out of 14 SWG MS sheet having hinged door and locking arrangement rubber gasket, extensible from both sides, suitable fro 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, of approved shade along with busbars of suitable rating, nuts-bolts and washer dust vermin water proof including painting with primer, and two coats of approved shade including proper connection with suitable size of wire with all connecting materials, earthing making etc. complete as required with followings.

630 A 35 KA FP MCCB - 2No with extended rotary handle, 630 A FP Changover - 1No 160 A 35 KA FP MCCB- 5 No with rotary handle, 100A 16 KA FP MCCB -1No with extended rotary handle, MCB 32A TPN- 7 NO MCB 40A TPN- 5 NO 63A TPN- 2, 32A SPN- 4 NO with required size copper busbar insulator and measuring instrument including all cnnecting material etc as required

160 A 35 KA FP MCCB - 1No with extended rotary handle, MCB 32A TPN- 8 NO MCB 40A TPN- 5 NO 63A TPN- 2, 32A SPN- 4 NO with required size copper busbar insulator and measuring instrument including all cnnecting material etc as required

160 A 35 KA FP MCCB - 1No with extended rotary handle, MCB 32A TPN- 4 NO MCB 40A TPN- 3 NO 63A TPN-3, with required size copper busbar insulator and measuring instrument including all cnnecting material etc as required

Fabricating, supplying, installation, testing and commissioning of weather proof feeder pillar in position on suitable plateform of brick masonary in 1:6 with neat finish cement plaster having suitable size of channels for mounting feeder pillar, the feeder pillar is to be fabricated out of 14 SWG MS sheet having hinged door and locking arrangement rubber gasket, extensible from both sides, suitable fro 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, of approved shade along with busbars of suitable rating, nuts-bolts and washer dust vermin water proof including painting with primer, and two coats of approved shade including proper connection with suitable size of wire with all connecting materials, earthing making etc. complete as required with followings.

100 A 35 KA FP MCCB - 2No with extended rotary handle, 100 A FP Changover - 1No , MCB 32A TPN- 1 NO,MCB 63A TPN-3 NO, 32A SPN- 10 NO with required size copper busbar insulator and measuring instrument including all cnnecting material etc as required

Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash fasteners etc. complete.

Capacity 4.5 kg.

Providing and fixing stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete.

Capacity 6 Kg.

High Back Revolving Chair SP226A

Medium Revolving Visitor Chair SP219

High Back Revolving Chair HT744A

SMART CLASS ROOM (AUDIO VISUL SYSTEM)

27X35X12.5ft classroom

3.1K lm, WXGA, HDMI, VGA projector Brightness : 3100 Lumens or Better Panel Size : 0.59 Inches or better Aspect Ratio : 16:10 or better Display Method : Transparent LCD (× 3, R/G/B) or better Lens : 1.2x manual zoom (throw ratio: 1.2-1.9:1) or better Center-to-corner uniformity : 80 % or better Contrast Ratio : 12000:1 or better Resolution : 1280 x 800 Pixels or better Keystone Correction Range : Vertical: ±30° , Horizontal: ±15° or better Input Terminals : Should have minimum HDMI In , D-sub HD 15-pin (female) x 1 Computer 1 In ( D-sub HD 15-pin (female) x 1 , Computer 2 IN ( RGB X 1 ) / Monitor Out Composite Video In , S-Video In , Audio 1 In , Audio 2 In , Audio 3 In , Variable Audio Out , Serial IN D-sub 9-pin (female) x 1 RS232C Compliant LAN IN RJ45 x 1 10BASE-T/100BASE-TX Built In Speaker : Output Power 10W ( Monoaural ) or better

Standard 3 feet Projector ceiling mount

220V motorized Projection screen Matte white surface with unity gain Image format: 16:10 Image Diagonal Size not less than 94 inches Shall be supplied along remote- switch

Passive Wall Plate − 15−pin HD, 3.5mm Audio & HDMI Front Panel Connections - 15−pin HD (F), HDMI (F) and 3.5mm (F). Rear Panel Connections - 15−pin HD (F), HDMI (F) and 3.5mm (F). Should allow for passage of EDID signals from source to display. Wall Plate Size - 1 gang EU/US or better

HDMI Equalizer

Moulded HDMI (Male - Male) Cord - 35 ft

Moulded HDMI (Male - Male) Cord - 6 ft

Moulded VGA (Male - Male) Cord - 6 ft

Moulded HDMI (Male - Male) Cord - 10 ft

Mixer Amplifier Max Output Power per Channel : 120W or better Insertion Loss (70V & 100V outputs) : 1 dB maximum Continuous Power per Channel : 15W or better Number of Input Channels : 8 Number of Output Channels : 2 Line Output level : 5.0VRMS into 10kΩ or better Input Sensitivity : Mic Input: 3mVRMS or better Line Input: 775 mVRMS or better RCA Input: 300mVRMS or better Frequency Response : 4/8 Ohm Output: 20Hz - 20kHz, +/-2dB 70V/100V Outputs: 80Hz - 15kHz +/-2dB or better Line Out: 20Hz - 20kHz, +/-1dB or better Total Harmonic Distortion: Power Amp Output: <0.5%, 20Hz - 20kHz or better Signal-to-Noise Ratio : >90dB or better Input Impedance : Mic: 400 Ω , Line: 20 kΩ (balanced) , RCA: 50 Kohms Phantom Power : 27VDC or better Crosstalk : -70 dB or better

Wall Mount Speakers Freq. Range (-10 dB) : 70 Hz - 23 kHz or better Power Capacity : 200 Watts Continuous Program Power , 100 Watts Continuous Pink Noise or better Nominal Coverage: 100° x 100° or better Nominal Sensitivity : 87 dB SPL, 1W @ 1 m (3.3ft) or better Maximum SPL @ 1m: 107 dB continuous average pink noise or better Nominal Impedance: 8 ohms or better Transformer Taps:- 70V: 60W, 30W, 15W, 7.5W or better 100V: 60W, 30W, 15W taps or better Enclosure Material: High Impact polystyrene or better Overload Protection: Full-range power limiting to protect network and transducers. Or better Environmental: Complies Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating or better Safety Agency Rating: Transformer should be listed per UL1876 or better

Various Bulk Cables and Connectors with Accessories -

6U Rack Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength Configured to hold 19-inch equipment with the help of two pairs of mounting angle provided with square slots to accommodate M6 Cage nuts at universal pitch Pattern as per DIN 41494 Top cover ventilated on all sides along the width and depth thereby enhancing exhaust of hot air Cable entry provision is both at the top and bottom covers with 35mm round cable entry point, the cable entry provision comprising of a gland plate with cable entry points in round cut outs edge protected with rubber grommets Monitor Tray – Ventilation – Tray Specially designed with multiple bend and additional stiffeners for better load carrying capacity Metal Steel Ventilation Panel – Blank Ventilation Panels to help to fill the open space in the rack along with ventilation to facilitate air circulations Castor – 4 Nos. of heavy duty castors to take care of heavy load bearing capacities are provided, 2 Nos. in the front with Break & 2 Nos. on the rear without break. Rack mount channels with Hardware sets Earthing Strip – Copper strip to take care of the grounding Colour Finishing – RAL - 7035 & RAL - 7037 Fine Texture with 60 – 80 microns, for better finish and aesthetic look Size: 6U or better

Installation, Commissioning, Consultancy and Labour

28X45X12.5ft lecture theature

Projector Brightness : 4000 Lumens or Better Panel Size : 0.59 Inches or better Aspect Ratio : 16:10 Display Method : Transparent LCD (× 3, R/G/B) or better Lens : 1.6x manual zoom (throw ratio: 1.2-1.9:1) or better Center-to-corner uniformity : 85 % or better Contrast Ratio : 3000:1 or better Resolution : 1280 x 800 Pixels or better Keystone Correction Range : Vertical: ±40° , Horizontal: ±30° or better Input Terminals : Should have minimum HDMI In , D-sub HD 15-pin (female) x 1 Computer 1 In , D-sub HD 15-pin (female) x 1 (RGB x 1) Computer 2 IN / Monitor Out Composite Video In , S-Video In , Audio 1 In , Audio 2 In , Audio 3 In , Variable Audio Out , Serial IN D-sub 9-pin (female) x 1 RS232C Compliant LAN IN RJ45 x 1 10BASE-T/100BASE-TX Built In Speaker : Output Power 10W ( Monoaural ) or better

Easy access to connectors Black or brushed aluminum One male VGA HD connector and 3.5 mm mini stereo audio jack USB connector One CAT RJ45 network/data connectors one(1) un-switched AC 110v-240v, 50/60HZ 10A outputs

Inputs - RGBHV, YPbPr or HDMI. Outputs - RGBHV and HDMI simultaneously. HDTV Compatible. HDCP Compliant. Input Auto-Scanning. EDID Capture - Copies and stores the EDID from a display device. Analog/Embedded Audio Support. Built-In ProcAmp - Color, hue, sharpness, contrast, and brightness controls. Control - Front panel, OSD (on screen display), contact closure. Non-Volatile Memory - Saves final settings. Freeze Button. Contact Closure - For remote switching of sources. USB Port - For upgrading firmware INPUTS: 1 PC/HD (RGBHV/YPbPr) on a 15−pin HD connector, 1 HDMI connector, 2 unbalanced stereo audio connectors on 3.5mm mini jacks. OUTPUTS: 1 PC (RGBHV) on a 15−pin HD connector, 1 HDMI connector, 1 unbalanced stereo audio connector on a 3.5mm mini jack. OUTPUT RESOLUTIONS: NATIVE, 480i, 480p, 720p@60Hz, 1080i@60Hz, 1080p@60Hz, 576i, 576p, 720p@50Hz, 1080i@50Hz, 1080p@50Hz, 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1366x768, 1680x1050, 1920x1200, 1280x800, 1440x900, 1400x1050, 1600x900. OUTPUT REFRESH RATE: 60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions. VIDEO LATENCY: Progressive input: 30ms (approx.); interlaced input: 50ms (approx.). CONTROLS: Front panel buttons, 1 remote contact closure on a 3−pin terminal block connector, 1 USB for programming.

Capture vision station + 500 GB hardisk Video Inputs* HDMI/ VGA/ RJ-45 Max. Video-In Channels Video-In Modes HDMI: 480i~1080p/60fps VGA Video: 480i~1080p/60fps VGA PC: 640*480~1920*1080 HDMI/VGA: 2 channels Full HD network camera: 4 channels Audio Inputs Line in, Mic Compression H.264/ AVC Frame Rate Max. 30fps Bit Rate 64Kbps~24Mbps Resolution Max. 1080p Compression AAC-LC Bit Rate 32Kbps~512Kbps External Storage USB / eSATA, Ext4 format Main Output Mode (Max.) HDMI / VGA : 1080p/60fps Streaming Format Output : RTP, RTMP Locally Stored File Output Format AVI/ MP4 Media Center Yes Max. Audio-In Channels 3.5mm Stereo: 2 channels

• Full HD 1080p high definition signal output format with a high frame rate of 60 fps • 10x optical zoom • Support live broadcasting (H.264/MJPG format, SVC and ONVIF protocol) • Low latency ( < 120 ms) • Ethernet, DVI-I, and C-Video image outputs synchronously • Maximum horizontal/vertical speed of rotation:120 degrees/second • Audio Input Support AAC encoding with 44.1/48 K sampling frequency • Built-in image flip and mirror function for easy installation

Mixer Amplifier Max Output Power per Channel : 120W or better Insertion Loss (70V & 100V outputs) : 1 dB maximum Continuous Power per Channel : 15W or better Number of Input Channels : 8 Number of Output Channels : 2 Line Output level : 5.0VRMS into 10kΩ or better Input Sensitivity : Mic Input: 3mVRMS or better Line Input: 775 mVRMS or better RCA Input: 300mVRMS or better Frequency Response : 4/8 Ohm Output: 20Hz - 20kHz, +/-2dB 70V/100V Outputs: 80Hz - 15kHz +/-2dB or better Line Out: 20Hz - 20kHz, +/-1dB or better Total Harmonic Distortion: Power Amp Output: <0.5%, 20Hz - 20kHz or better Signal-to-Noise Ratio : >90dB or better Input Impedance : Mic: 400 Ω , Line: 20 kΩ (balanced) , RCA: 50 Kohms Phantom Power : 27VDC or better Crosstalk : -70 dB or better

Various Bulk Cables and Connectors with Accessories -

Installation, Commissioning, Consultancy and Labour and 9U Rack Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure better stability and strength Configured to hold 19-inch equipment with the help of two pairs of mounting angle provided with square slots to accommodate M6 Cage nuts at universal pitch Pattern as per DIN 41494 Top cover ventilated on all sides along the width and depth thereby enhancing exhaust of hot air Cable entry provision is both at the top and bottom covers with 35mm round cable entry point, the cable entry provision comprising of a gland plate with cable entry points in round cut outs edge protected with rubber grommets Monitor Tray – Ventilation – Tray Specially designed with multiple bend and additional stiffeners for better load carrying capacity Metal Steel Ventilation Panel – Blank Ventilation Panels to help to fill the open space in the rack along with ventilation to facilitate air circulations Castor – 4 Nos. of heavy duty castors to take care of heavy load bearing capacities are provided, 2 Nos. in the front with Break & 2 Nos. on the rear without break. Rack mount channels with Hardware sets Earthing Strip – Copper strip to take care of the grounding Colour Finishing – RAL - 7035 & RAL - 7037 Fine Texture with 60 – 80 microns, for better finish and aesthetic look Size: 6U or better

Add 18% GST

Add 1% Labour cess 1%

MS SANJAY KUMAR