Loading
Loading…
Loading…
Tender Value
₹9.7 L
EMD Value
₹19,300
Closing Date
12 Aug 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
SRDSTE1
20 conditions · 12 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Covering letter duly filled by the tenderer to be submitted on their letter head as per Section 4.2 Part-I of STD-2022
A copy of Authorization/Power of Attorney issued by the sole proprietor/partnership firm/LLP/ Society/JV/Company in favour of the individual to sign the tender on behalf of the sole proprietor/partnership firm/LLP/ Society/JV/company as per Annexure Section 4.4 of STD-2022 Part-I. In case of company power of attorney must be backed by the resolution of Board of Directors and create liability against the company.
Details of Plant and Machinery already available with the firm must be uploaded as per Annexure-IX of STD-2022
List of engineers/personnel already available/ proposed to be employed for deployment on this work must be uploaded as per Annexure-X of STD-2022
Details of Beneficiary for Electronic Transfer of Funds must be uploaded as per Annexure-XII of STD-2022
An undertaking by sole proprietor firm/all partners of the partnership firm/Power of attorney holder if company (as per Annexure-B/C uploaded with STD-2022)or LLP or Society/JV that he/they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of opening of bids, either in their individual capacity or in any firm in which they were / are partners. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 (Part-II) of the General Conditions of Contract (as per Annexure- B/C uploaded with STD-2022). (Detail instructions/condition may be seen on Tender Document)
Please submit the copy of the registration certificate of firm, PAN, GSTIN (if applicable)etc.
Tenderes are compulsorily required to upload undertaking (attached as Annexure-A uploaded with STD-2022) regarding Employment /Partnership of Retired Railway Employees attached as Annexure'A'. Otherwise the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. Note:- Tenders without undertaking or required information shall be summarily REJECTED.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership firm/Company/Joint Venture (JV) /Registered Society/ Registered Trust/HUF etc. The Tenderer (s) who is/ are constituents of firm, company, Association or Society shall enclose self-attested copies of the constitution of their concern, Partnership Deed, copy of PAN Card and Power of Attorney along with their tender. Tender Documents in such cases shall to be signed by such persons as may be legally competent to sign them on behalf of the firm, Company, Association, Trust or Society, as the case may be. Following documents shall be submitted by the tenderer: (a)Sole proprietor Firm: (i) Affidavit of sole proprietorship firm. (ii) All documents in terms of explanatory notes in clause 3.5 PART-I of STD-2022 (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD-2022. (c) Partnership firm, as per Tender Form-2 (Annexure-I) Para 18.10 PART-I of STD-2022: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) All other documents in terms of TENDER FORM -2 of STD-2022 (d) Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD2022 (e) Limited Liability Society: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender/MoU/JV on behalf of the LLP and create liability against the LLP. (iv) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD2022 (f) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. (v) All other documents in terms of explanatory notes in clause 3.5 PART-I of STD-2022 (g) Joint Venture: All documents as specified under Para 3.7.7 PART-I of STD-2022
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenders shall be treated as NULL & Void as per Para 4.6 of STD- 2022
This tender will govern under "Indian Railway Standard General Condition of contract - 2022 or latest. Tenderers are requested to read GCC and tender document very carefully before submitting their Bid.
Performance Guarantee- The successful bidder shall submit PG as per procedure Mentioned in clause 5.1A of Northern Railway standard Tender Document 2022, The successful bidder shall submit the performance Guarantee(PG) amounting to 5% of the contract value for all the tenders issued
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per clause 18.10 of Annexure -VIII of Northern Railway Standard Tender Document 2022 shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
As per Railway board letter No. 2018/CE-1/CT/4 dt. 17.10.2018 contractor shall mandatorily update the labour data on Railway Sharmik kalyan portal on monthly basis. The detailed guidelines are given in Clause 5.4 of PART-I of Standard Tender Document- 2022.
S&T estimate in c/w Construction of Road Over Bridge in lieu of level crossing No.344 on MK-BLPU section..
SNT-Underpass-LC-344-MB
SNT-Underpass-LC-344-MB
Open
Works - General
12 Months
Moradabad, Uttar Pradesh
₹0
₹19,300
21 Jul 2026
21 Jul 2026
29 Jul 2026
28 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 9,66,661.23 | ||
| — | 600.00 | — | — | ||
| Excavating and refilling of trench in Normal Soil to the level of ground with rammed earth as per drg. No.(NR/S&T/CON/1. 1/97-A) so as not to form a drain 0.3 Mtrs. Wide & 1 Mtr. Deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable route plan in all type of soil, It also includes clearance of routes of trees & bushes. Lesser depth due to site condition shall be paid proportionately only after taking permission from atleast JAG officer. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 49,548 | |
| — | 250.00 | — | — | ||
| Boring & Trenchless cabling along with supply & insertion of self lubricated HDPE pipe as per IS 4984:2016 of 110 mm outer dia with 6mm wall thickness in the bore for laying of Signalling / Telecom /Power cable under track/road/culvert at the depth of 1.5mtrs etc.cable laying covered seperately. Inspection Authority: Supply: Consignee, Execution: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 3,74,860 | |
| Laying of signalling/Telecom/power cables of different sizes as per drg. No. (NR/S&T/CON/1.1/97) and as per cable route plan approved by Railways and meggering of cable before and after its laying of all type of outdoor cables. Meggering to be done for each drum seprately. Meggering sheets to be supplied and filled up by contractor and submitted to railways. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 1,71,350 | |
| — | 4000.00 | — | — | ||
| Supply and laying of 2nd class bricks in the trench and laying as per Drg. No. (NR/S&T/CON/1.1/97) as per instructions of the site Engineer. Inspection Authority: Supply: Consignee, Execution: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 30,000 | |
| — | 4.00 | — | — | ||
| Supply of single app.case steel RE with 'E' type lock and key ward no.42 and handle as per drg. No. sketch no.RE/S&T/ALD/SK/219/82 and 221/82 with Alt.B.. Inspection Authority: Consignee Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 85,714 | |
| — | 4.00 | — | — | ||
| Casting, concreting and curing of foundation and erection of App. Cases (Single) as per drg. No.(NR/S&T/D&D/02/2024). All materials such as cement, sand, aggregate and anchor bolts shall be supplied by the contractor. App. Case single will be supplied by railway. Contractor is required to execute all type of repair works of foundations if required during inserting the cable for termination. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 18,946.96 | |
| — | 4.00 | — | — | ||
| Preparation & fixing of bakelite hylum sheet 910x800x6 mm and bakelite shelf 900x450x25 mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts & bolts. Fixing of fuses, ARA terminal, plug in type Q series relays and other type relays on square bars fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the wood plank & all cable entry point on location boxes, location huts. JB's relay room/battery room to be closed with suitable masonry works covered with sand and plastering. Description for terminal drawing of circuits, inside app. Case. painting from outside as will inside with red oxide and aluminium paint is covered separately. Size of lettering will be 100 mm or as per instructions of Engineer at site. All material including bakelite shilf, hylum board, wood plank, angle iron square bar, wire and wiring material as per the IRS specn. nuts and bolts and other items shall be supplied by the contractor . Relays. ARA terminals & fuse only shall be supplied by the railway.App. case single involving wiring of relays Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 24,685 | |
| — | 1000.00 | — | — | ||
| Supply of terminal block M-6 (ARA terminal-25mm) as per IRS Spec. No.IRS-S-75/91 (Or latest) & IRS Drg. NO.SA-23741/A (ALT.4) or latest. This meterial will be procured by RDSO approved firm Inspection Authority: RDSO Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 72,120 | |
| — | 1.00 | — | — | ||
| Dismantling of lifting barrier/gate leaves/ELB complete set along with winch, wire rope, boom locking arrangements. All dismantelled material to be transported and stacked in the store of SSE/Sig of MB div. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 3,110.11 | |
| — | 1000.00 | — | — | ||
| Termination of all the cores of all type of outdoor cable after its laying on both end. This also includes preparation of test report for core to core & core to earth on prescribed Performa for each core of the cable separately. This also includes dressing & lacing of cables on both ends. Performa for testing & material for lacing to be supplied by the contractor. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 12,020 | |
| — | 4.00 | — | — | ||
| Supply burying of earth electrodes pipe of 3 metre length and 50 mm dia. pointed on lower end by tappering for a length of 150mm as per drg. No. NR / S&T /CON / 6.3 / 97 and connecting with lightening arrester or signalling gears as per std. practices. The item includes digging of pit in earth 3 Mtrs. deep and fixing earth electrode pipe in it. Earth pipe shall be burried in the ground to the length of 2.7 Mtr after welding 6 SWG wire at the lower end and fixing through nut and bolt at the top. This includes casting of cement concrete enclosures as per drg. No. NR/S&T/CON/6.4/97. The enclosure is to be plaster on all sides with cement & sand mixture of 1:4 ratio. The soil treatment shall be done as per standard practices. The item includes provision of earthing lead. Inspection Authority: Supply: Consignee, Execution: Site Engineer . Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 10,397.96 | |
| — | 50.00 | — | — | ||
| Wiring of relays in relay room/relay huts as per approved wiring diagrams. All material required will be supplied by contractor including indoor cables and wires of 1x1, 1x0.6, 3/.029, 16/0.2, 40x0.6, 40x1, 60x0.6, 60x1 dia, of copper conductor as per NR practice conforming to latest IRS S-76/89 (Amd.3) or latest available specifications. This also includes soldering, dressing, bunching, lacing, fixing of relay bases etc. and provision of LED indication box of vital relays in relay room if required and provision of potential free contacts of all relays on tag block for data logger as per instruction of site Engineer. Indoor cable/wire shall be as per Spec. No. IRS-S 76/89 (Amd.3) or latest available. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 24,068.5 | |
| — | 16.00 | — | — | ||
| Design and preparation of Selection Table, Panel Diagram, Wiring Diagrams and all other related documentation as per approved SIP for BLPU station of Moradabad division on Northern Railway. Specification for PI/RRI work (Circuits shall be designed by the contractor with the use of Q-series relays to suit Railway electrified area & obtaining approval of the engineer as per following -(i) Supply of 6 copies of completion set of superior quality paper, laminated, properly bound in steel clip jaw file with cushioned cover.(ii) Software back up of complete set in the form of CDs.(ii) One complete set of tracings.(iv) Design through CAD(v) Drawings in A3 & plans in bigger size Inspection Authority: Consignee Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 59,625.76 | |
| — | 1.00 | — | — | ||
| Geo-Tagging route in trench for signalling or telecom cable, with GNSS or similar coordinates acquired generally with upto 10cms location accuracy (inaccuracy upto 40 cms range permitted for locations with tree cover etc, final accuracy depending on weather & interference conditions), with depth of cable in trench based on ground level at that location to be indicated. 1. Data Output should be mapped provided on .kml format or similar format with integrated depth data of cables-mapped. Equipment utilised will be cable route locator with GNNS/GPS or similar RTK/DGPS or similar receiver mounted on equipment. 2. Equipment utilised should be cable route locator with suitable transmitter power using low frequencies of & RTK/DGPS or similar mounted directly on equipment with RTX/DGPS or similar Correction service with high precision for upto 10 cms accuracy, with utility mapping software/web based interface used on mobile phone ( software/web based interface should take data via Bluetooth/WiFi etc from both Cable locator & RTK/DGPS or similar GNSS receiver , with Auto correction Catalyst service simultaneously to provide integrated data output) 3. Additional map required with cable distance from nearest track/ OHE Pole to be included and provided as hard copy with coordinates of cable mentioned. Seperate color code to be used for different trench for S&T cables, capture Images for Manhole/OFC JC Location with nearest reference point, if applicable. 4. In routemap, Geotagging to be done at interval distance of 30 meters or less for approximate straight path. And at track crossing, diversion, culvert, jointing locations, as per site condition . 5. Data output will be provided on : USB & Hard copy print. Make: Rycom Pathfinder , 3M or similar for the data acquisition. 6. Training on Geo-Tagging of cable route included or similar Contractor shall provide access of all data/maps etc. for 5 years. Inspection Authority: Site Engineer Technical Specification: As per technical specification provided in Part III of Tender Document | — | — | — | 30,214.94 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
LC344_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].