REPAIR MAINT OF PLINTH PROTECTION HARD STANDING JOINERY PLASTERING INTERNAL WIRING AND FLAME PROOF LIGHTING FOR WSA AND OTHER OTM BLDGS OF TECH AREA AT AF STN GWALIOR

Amount

Demolition of cement concrete ( unreinforced) including floor tiles, screed bed at ground floors and pavings n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed .

M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & fair complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair,laid in alternate panels complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Demolition stone slabs , tiles , paver of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block Glossy finish any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement with pigment complete all as specified and directed.(Make:- ISI Marked as approved by GE)

M&L sand filling under floors or in foundations including watering and consolidation all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B-0 ( using 12.5mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding in layer of cement mortar for 1:4 for laying floor finishes complete all as specified and directed.

M&L for 10 to 12mm thick Endura desiner tiles of size not exceeding 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors complete all as specified and as directed.(Make :- DUROTA/JOHNSON/ORIENT/SOMANY)

M&L for Vitrified Ceramic tiles 8 to 9mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

All as per item no. 11 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster 1:4 as backing coat complete all as specified and directed.

M&L for Vitrified Ceramic tiles 8 to 9mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc. 1 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed

All as per item no. 13 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster 1:4 as backing coat complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10mm thick rendering cm 1:4 for back coat all as specified and as directed.

M&L for providing cement concrete (1:2:4) Type B0 (using 12.5mm & 20mm graded stone aggregate) as in kerbs, haunching coping & flooring including necessary formwork rounded or chamfered angles all as specified and directed.

M&L for 15-18 mm thick Granite (of any type) work rounded and polished at edges in floors, steps pillars, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as pecified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm th screed bed in CM 1:6 complete all as specified and directed.

S&F in repair for 3 mm thick PVC flooring, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including all cutting and waste and work in all position, complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed .

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed .

S&F 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed .

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete including demolition of brick work of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.all as specified and directed.

Description same all as per item No 24 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth (without using exrtra cement) complete all as specified and directed.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth (without using exrtra cement) including taking down cement plaster on brick surface or stone surfaces and raking out joints hacking for key, scrubbing down with water etc in at different locations complete all as specified and directed.

M&L for two coat of distemper oil emulsion to newly plastered surfaces of walls including preparation of surface over one coat of primer complete all as specified and directed.

M & L preparation of new plastered surface and applying two coat of external weather coat over a coat of primer on external wall all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium door shutters with extruded built up standard tubular sections using aluminium sec not less than 2 mm thick, (shutter with styles 85mmX44.45mm, top rails 83.5mmX44.45mm , intermediate rail 83.5mmx44.45mm, bottom rail 114.3mmx44.5mm) with aluminium beading and rubber neoprene paking for fixing glass, including handle 02 Nos in each door, hinges, anodised aluminimum snap beading, screws, tower bolts all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium sliding windows shutters with extruded built up standard tubular sections (using aluminium sec not less than 1.5mm thick), with aluminium beading and rubber neoprene paking for fixing glass and, brush seal, 02 Nos sliding rollers at bottom, proper locking arrangement to each shutter using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge.

S&F 5mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.

S&F 4mm thick tinted glass, and glazing in squre/rectangular aluminium shutters/frames complete all as specified and directed.

S&F 4mm thick ACP (Aluminium composite pannel) coloured sheet with 0.25 mm thick of aluminium coil, sandwitch pannel as in alumiium doors/wall claddings with sealent and necessary hidden screws complete all as specified and directed. Make:- REYNOBOND, ALUDECOR, ALSTRONG, ALSTONE, ALEXPANEL

S&F 300 mm long aluminium alloy, anodised , sliding door bolt with hasp , staple ( bolt type ) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified & directed

S&F 100 mm Brass Mortice lock 4 lever, vertical type, suitable for auminium doors Make : Godrej Harrison, Link etc

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weight 0.55 Kgs/m including necessary joining cleats, glazing clips, ruber packing, anodised aluminimum snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed.

S&F Aluminium grills size exc. 4mm x 4mm and aperture n exc. 80mm incl. fixing with aluminium channel, 1mm thick with steel screw and tint match with existing complete all specified and directed

S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed.

S&F MS steel sections ( angle, flat, MS plate/ sheet, bars etc) as in gates, door frame, window grills, hung type grilled gates, grating,etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, including MS hinges/ pintle hinges, stops, hand-made sliding bolts, etc. railings, framework of watertanks and similar work conforming to Fe.290.Gde-E-165

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L preparation of new wooden surface and applying two coat of synthetic enamel paint over one coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type anodised, complete all as specified and directed.

S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified

S&F 150 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C21 complete all as directed and specified

S&F in repair, door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.

S&F in repairs 100 mm Brass Mortice lock, 4 Levers, vertical type suitable for aluminium doors Make : (Godrej, Harrison, Link) etc

M&L for preparation of old decorated wall suraces and applying one coat of distemper oil emulsion with Roller on wall surfaces including filling the cracks and depression with putty to make the surface even & smooth complete all as specified and directed.

M&L for preparation of old decorated ceiling suraces and applying one coat of distemper oil emulsion with Roller on wall surfaces including filling the cracks and depression with putty to make the surface even & smooth complete all as specified and directed.

M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete ( unreinforced) in Roofs, floors (other than ground floors), tiles including existing roof treatment (screed plaster,& tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in and levelling course etc over roof surface complete all as specified and as directed.

M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")

Material and labour for application of 5 layer SHR waterproofing Coating System on leaking concrete surface by through surface preparation followed by one absorption coat of Thermacool WP51, Nano-tech modified, UV Resistant, elastomeric clear coat having min 50% solids, then overcoating with 2 coats of Thermacool WP51+ Cement mixture as water proofing coat having +450% elongation, Tensile strength min 2.2Mpa and then top coated with 2 coats of THermacool 0.3C pure acrylic based, UV resistant non alloying bio organism resistant (Antifungal, Anti bacterial) Solar IR heat reflective coating confirming to BIS Standard IS17218:2019 with pull of adhesion 2.8Mpa, passes 2000 hours accelrated durability test, Suitable for all types of cementitious surfaces, white colour, mat, surface coverage 3.25 Sqm per ltr/per 2 coat, DFT 100-120 microns using brush roller airless spray gun as applicable. The product should have been tested at IIT or NABL approved lab and application is to be done by Thermacool approved applicator only.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down carefully existing unserviceable flame proof point wiring of any description & in any height ( 4m to 16m ) position with and including existing conduit fixed on surface with and including existing junction boxes in between the point wiring complete, including making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: (i) Old existing junction boxes obtained in serviceable condition from taking down of point wiring shall be re-used in the work. (ii) Taking down / replacement of existing fittings like switches/sockets / switch fuses / tube light fittings etc. if any, shall be measured and paid for separately under appropriate item of Schedule `A'

Material and labour for flame proof point wiring for one light point or one socket point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable, 1100 volts grade in and including stove enameled black, rigid steel conduits of size not less than 20 mm dia (Medium grade) fixed on surface of walls/ceilings any height ( 4m to 16m )as directed with all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core FRLSH, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly / fittings etc. complete all as specified and directed by Engineer-in-Charge. NOTE : (i) Old junction boxes retrieved in serviceable conditions shall be re-used in the work. However, additional junction boxes, if any required, for making new point wiring other than the quantity of junction boxes retrieved from taking down of point wiring, shall be measured and paid for separately as ‘’supply only’’ under appropriate item of Schedule `A' but fixing element of any type of junction boxes new or old is deemed to be included in the rates quoted by the contractor for the above item. (ii) Wiring shall be terminated and connected to the relevant switch / controlling switch gear and relevant fittings / sockets all as directed and controlling switch / fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

All as per item here-in-before but point wiring with using 2.5 Sqmm (nominal area) stranded copper conductor, single core, FRLSH PVC insulated & unsheathed cable for 16 A Flame proof Switch and socket complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof push button 10 Amps in LM 6 metal enclosures, conforming to complete all as specified and directed by Engineer-in-Charge.

Supplying & fixing in replacement of flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 2 pole + earth suitable for 250 volts supply and current rating of 16 Amps complete all as specified and directed by Engineer-in-Charge.

Supplying & fixing in replacement of flame proof, switch socket & plug combined made of aluminum alloy LM-6 having 3 pole + earth suitable for 415 volts supply and current rating of 25/32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement sub main wiring in repair concealed using Four single core PVC insulated, FRLSH, stranded copper conductor cable any height ( 4m to 16m ) of size 4 Sqmm for sub main wiring, along with two run of 4Sqmm PVC insulated, FRLSH, Stranded copper conductor cable for earth continuity conductor in steeel conduit complete all as specified and directed by Engineer-in-Charge. Note: Four run of single core PVC cable with two run of earth wire and one run of steel conduit together shall be measured as one unit.

All as per item here-in-before but using Two single core, 2.5 Sqmm copper conductor cable and with one run of 2.5 Sqmm PVC insulated, FRLSH, Stranded copper conductor cable for earth continuity conductor. Note: Two run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit.

All as per item here-in-before but using Two single core, 1.5 Sqmm copper conductor cable and with one run of 1.5 Sqmm PVC insulated, FRLSH, Stranded copper conductor cable for earth continuity conductor. Note: Two run of single core PVC cable with one run of earth wire and one run of steel conduit together shall be measured as one unit.

Supply & fixing in replacement of flame proof FLP well glass lamp fitting 70 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass including taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed.

Supply & fixing in replacement of flame proof well glass fitting 150 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass ncluding taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of flame proof FLP Flood light 120 W LED fittings as per IS : 2148 / 1981 & 2206 (Part-I )1984, Temperature class T-4, & made of cast aluminum alloy LM-6 having inside & outside light grey powder coating shade No 631 as per IS: 5 & one No internal earthing terminal and 02 Nos external earthings of screw of M6- size with 02 Nos plain washers heat resistant glass ncluding taking down the unserviceable fitting from any height ( 3m to 16m) complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement FLP Flexible metelic Hose conduit M20/3/4ET 300 mm long complete all as specified and directed.

Supplying and fixing in replacement flame proof junction box 3 way ¾ “ (100 mm dia) entry in LM – 6 complete all as specified and directed.

MAANVI CONSTRUCTION (BID ID -3402257)

RADHA MADHAV CONSTRUCTIONS (BID ID -3410319)

M/S STEAD FAST (BID ID -3410600)

M/S KAPIL CONSTRUCTION CO (BID ID -3402128)

M/S Amit Traders (BID ID -3402559)

Sunil Traders (BID ID -3402843)

M/s. Ravi and brothers (BID ID -3402239)

J.N.R. Engineers and Builders (BID ID -3402562)

M/S Pramod Kumar Jain (BID ID -3409847)