Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC FLAT NO 06 BLDG NO B 2 PLEASANT PARK WANWADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.1 L+₹1.5 L (5.60%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹28.3 L+₹1.8 L (6.63%)Rejected-Finance 3RD FLOOR VVIP RESIDENCY MAHINDER VIHAR CHAKRATA RD NEAR RAMADA HOTEL DEHRADUN UTTARAKHAND 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance High Rate | |
| 4 | L4₹32.2 L+₹5.6 L (21.0%)Rejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L4 | Rejected-Finance High Rate | |
| 5 | L5₹33.0 L+₹6.4 L (24.2%)Rejected-Finance | L5 | Rejected-Finance High Rate |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8348 REPAIR MAINT AND UPKEEP OF WATER SUPPLY AND SWIMMING POOL INSTALLATIONS INCLUDING PUMPS MOTORS STARTERS AND WATER SUPPLY DISTRIBUTION LINES AT ASI AIPT OLD NDA AREAS AND OTHER MINOR UNITS UNDER GE CENTRAL PUNE
2022_MES_558063_1
8348 REPAIR MAINT AND UPKEEP OF WATER SUPPLY AND S
Open Tender
Civil Works
Item Rate
270 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹89,000
Yes
7 Jan 2023
15 Oct 2022
11 Nov 2022
15 Oct 2022
9 Nov 2022
25 Oct 2022
Amount
Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of pipe in trenches complete in the following type of soil.
a) Soft / loose soil
b) Hard / dense soil
Excavation in trenches, not exc 1.5 mtr wide and exc 1.5 mtr depth but not exc 3.0 mtr in depth for laying of Pipe in hard/dense soil and getting out complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil all as specified & directed
Removing excavated meterial to a distance not exc 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point all as specified.
Cutting of road/hard standing and making good with PCC (1:2:4) type B 1 using 20mm graded stone aggregate complete all as specified.
Taking up or down from trenches unserviceable old / chocked out GI Tubing incl. connections/ fittings of the following sizes
a) 20 mm bore
b) 25 mm bore
c) 40 mm bore
d) 50 mm bore
e) 80 mm bore
Supply and laying galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc laid in trenches complete all as specified and as directed of following sizes
a) 20 mm bore
b) 25 mm bore
c) 40 mm bore
d) 50 mm bore
e) 80 mm bore
Supply and fix MS ERW pipe 100mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer including taking down unsv pipe all as specified and directed.
Supply and fix MS ERW pipe 150mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer including taking down unsv pipe all as specified and directed.
Supply and fix MS ERW pipe 200mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer including taking down unsv pipe all as specified and directed.
M & L For running welding of ERW Pipes as required on site all as specifeid and directed.
S & F in repairs MS Flanges of required dia and size as per site requirement all as specified and directed.
Supply & lay in replacement PPR pipes of pressure rating 10 kg/Sqcm fixed complete to walls, ceilings or in floors/ trenches etc.including all fittings such as bends, elbows, tees, short pieces, union etc complete all as directed of following sizes :-
a) 15/16 mm bore
b) 20 mm bore
c) 25 mm bore
M & L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for arresting leakages, tapping or making new connections etc complete all as specified. Note: Excavation and earthwork will be measured and paid separately.
a) 20 mm bore
b) 25 mm bore
c) 40 mm bore
d) 50 mm bore
e) 80 mm bore
Supply and fix in repairs gun metal gate valve with iron wheel head screwed both ends for iron pipes including dismantling the old unserviceable gate valve for following size :-
a) 25 mm bore
b) 40 mm bore
c) 50 mm bore
Supply and fix in replacement rotational moulded polythylene water storage tanks (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of wash outs, (vent pipe) of capacity 500Ltrs all as specified.
M & L preparing old painted surfaces by scraping and removing old paints, rust etc. from CI/DI pipes of rising main, delivery of OH Tank and pumps and painting with synthetic enamel paint (two coats) complete all as specified and directed.
M & L preparing old painted surfaces by scraping and removing old paints, rust etc. from Pumps set all including motor pump valves etc. and other connected items etc and painting with synthetic enamel paint (two coats) complete all as specified and directed. Note :- Painting for item of pump set consists of one pump, one motor, two valves and two NRVs etc shall be measured as one job.
Surface dressing in soft/ loose soil not exeeding 15 cm deep, across the pipe lines and including site clearance, cutting and cleaning of branches / bushes / plants / grass obstructing the pipe lines / valves / chambers / sumps / OHTs on either sides and water supply Installation area including disposal of materials up to a distance not exceeding 50 mtr complete all as specified and directed.
Cleaning of UG sumps by scraping the inner walls of sumps & cleaning with the wire brush using tank washing chemicals, bleaching powder etc applying disinfection chemicals taking out all dirt, scales, sludges, etc and white washing the wall with two coats of lime after cleaning the walls from inside all as directed including writing the date of cleaning for the following capacity tank. Note: Scaffolding, brushes, bleaching powder, lime etc for cleaning the internal surface and arrangements for pumping out water below wash out to be arranged by the contractor. The rate quoted by the contractor shall be deemed to be included for the above quoted rates and nothing shall be paid extra on this account.
a) 10000 Glns (AIPT PH)
b) 37000 Glns (ASI PH)
c) 50000 Glns (AIPT PH)
d) 80000 Glns (Old NDA)
e) 136380 Glns (Old NDA)
Cleaning of Over head reservoirs upto 20 mtr staging by scraping the inner walls of sumps & cleaning with the wire brush using tank washing chemicals, bleaching powder etc applying disinfection chemicals, taking out all dirt, scales etc and white washing the wall with two coats of lime after cleaning the walls from inside all as directed including writing the date of cleaning for the following capacity tank. Note: Scaffolding, brushes, bleaching powder, lime etc for cleaning the internal surface and arrangements for pumping out water below wash out to be arranged by the contractor. The rate quoted by the contractor shall be deemed to be included for the above quoted rates and nothing shall be paid extra on this account.
a) 10000 Glns (AIPT)
b) 50000 Glns (AIPT)
c) 120000Gls (Old NDA)
M & L for attending the emergency repairs to leakage/ damage GI pipe of size 20/25 mm dia including carrying out minor repairs etc as required to arrest the leakages all as directed including necessary excavation, earth work, returning filling of excavated soil and removal of water by using pump, cutting out GI pipe at both ends and jointing with and including new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified
M & L for attending the emergency repairs to leakage/ damage GI pipe of size 40/50 mm dia including carrying out minor repairs etc as required to arrest teh leakages all as directed including necessary excavation, earth work, returning filling of excavated soil and removal of water by using pump, cutting out GI pipe at both ends and jointing with and including new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified.
M & L for attending the emergent repairs to leakage/ damage GI pipe of size 80/100 mm dia including carrying out minor repairs etc as required to Make- the system in order / functional and necessary excavation ,returning , filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified.
Supply and fix for in line, automatic pressure boosting equipment electrically operated 240 Volts, 50 Hz fixed to 20/25mm dia confirming to Model No PB 200 Make Wilo including necessary electrical connections and GI fittings including removal of old unsv one complete all as specified. Make – Willo or its equvalent in Kirloskar, KSB, Crompton.
M & L for burning out unsv/ leakage lead joint in position, including removing old lead including necessary excavation in soils, returning, filling and removal of accumulated water by using pump of sizes 150 mm bore dia complete all as specified and directed by Engr-in-charge. Note : (i) Excavation and earthork will be measured and paid separtely (ii) Lead joint will be measured and paid separetly under respective items.
M & L for Run Lead joint in spigot and socket pipes and fittings of size 150 mm bore dia including necessary caulking the spun yarn as required complete all as specified.
Maintenance and servicing of Sluice valves of any size by disconnecting the water connnection, opening the valves for inspecting all parts to identify defective parts, cleaning/ servicing & greasing including refixing and replacement unsv parts, shafts, shaft seal, rubber washers, gates, rubber seal, worn out gland packing, gland nut bolt & replacement of damaged bolts, reassembling of valves, installing, connecting with water connection and testing for performance complete all as directed.
S&F in replacement Cast iron Double Flanged Non- Rising Spindle type Sluice valve having stainless steel to AISI 410 Spindle & Gun Metal Working parts, manually Handwheel operated Confirming to IS:14846/2000 (PD) PN -1.6 with ISI Marked. Flange ends drilled to IS :1538.Complete as specified and Directed. Make:- Venus/Leader/Kirloskar.
(a) 80mm dia
(b) 100mm dia
(c) 150mm dia
supply and fixing in replacement cast iron foot valve, ISI marked both end flanged with nut bolt washers and rubber gasket confirming IS 4038, installation, testing of following sizes complete all as dircted and specified
(a) 50 mm dia
(b) 80 mm dia.
(c) 150 mm dia
M & L in replacement for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for CI Pipe upto 150 mm bore dia complete all as specified and as directed.
Taking down and Supply and fixing Mechanical joint of made out of CI of thickness not less than 10mm fabricated as per existing site requirement including long MS nut, bolt, rubber gasket, cutting/fixing of pipe in position of any size CI/GI/DI pipe with the help of manually as well as mechanical T&P complete all as directed of following sizes :-
(a) 40/50 mm dia bore
(b) 80/100 mm dia bore
(c) 150 mm dia bore
M&L construction of Brick Masonry Valve Pit chamber, one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded stone aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded stone aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work and excavation in Soft/Loose Soil and demolition of old unserviceable Valve Pit chamber of following sizes complete all as specified and as directed.
(a) 1000 x 1000 x 1000 mm (Internal Dimension)
(b) 2000 x 2000 x 2000 mm (Internal Dimension)
(c) 1500 x 1000 x 2500 mm (Internal Dimension)
M & L for taking out pumping sets from foundation, disconnecting the water and electric connnection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning/ servicing & greasing including refixing and replacement unsv Ball bearings for drive end and non drive end, Gun metal bushes, warn out gland packing, gland nut bolt & replacement of damaged foundation bolts, reassembling of pumping set and transporting back to pump house, Re - installing, Re - connecting with water & electric connection and testing for performance complete for following capacities of pumps.
(a) Pump capacity 30.0 HP
(b) Pump capacity 40.0 HP
M & L for taking out electric motor for rewinding by disconnection from terminal & pump coupling & foundation complete, removing of motor, carrying to workshop and return after opening motor removing burnt copper wire, cleaning all parts throughly rewinding motor with same gauge and same No of turns by super enamelled copper wire including insulating materials varnishing, heating etc and replacement unsv Ball bearings, Terminal plate, Foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion of following capacities of pumps complete all as directed :-
(a) Pump capacity 30.0 HP
(b) Pump capacity 40.0 HP
M & L for taking out monoblock pump set for repair of pump and rewinding of electric motor by disconnection from foundation complete, removing of motor, carrying to workshop and return after opening motor removing burnt copper wire, cleaning all parts throughly rewinding motor with same gauge and same No of turns of super enamelled copper wire including insulating materials varnishing, heating etc and replacement unsv Ball bearings, Terminal plate, Foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion of following capacities pump complete all as directed :-
(a) Monoblock pump set of Cap 2.0/3.0 HP
(b) Monoblock pump set of Cap 5/7.5 HP
(c) Monoblock pump set of Cap 12.5/15 HP
S & F DOL starter in sheet metal enclosure, for monoblock pump/motor of capacity 2.0 /3.0 HQ including removal of old unsv one complete all as specified and as directed. Make : L&T or equivalent in other approved makes.
All as per item no 37 above but of 7.5 HP capacity
All as per item no 37 above but of 10/12.5/15 HP capacity
S & F Automatic star delta starter in sheet metal enclosure, for monoblock pump/motor of capacity of 30/40 HP capacity
S & F Submersible pump controller in sheet metal enclosure, 230 Volt single phase,suitable for motor of cap 2.0/3.0 HP including removal of old unsv one complete all as specified and directed.
M & L for disconnet the electric cable from panel and taking out the unserviceable/ burnt out submersible/ openwell pump set from the bore with the help of chain pully and tripod and transporting to work shop for carrying out rewinding the motor with same gauge and same no of turns of with water proof PVC insulated copper wire of existing guage and size to achieve the specified/ required RPM after taking out old unserviceable winding wire, cleaning/ repairing damaged slots and also replacement of impellers, bearings, thrust bearings, gun metal bushes and NRV as per existings of pump, and installing/ inserting back in position connecting up water and electric connections complete for submersible pump set in bore well of capacity upto 3.0 HP / 5.0 HP all as directed. Note:- Submerssible cable, rope etc shall be paid seperately.
Supply only in replacement for lowering the submerssible copper conductor mutistraned cable of size 3 core x 2.5 Sq mm with necessary connections from Motor to starter complete all as specified.
Supply only in replacement for lowering the submerssible copper conductor mutistraned cable of size 3 core x 4 Sq mm with necessary connections from Motor to starter complete all as specified.
Supply in replacement only Nylon rope 8/12 mm dia with necessary locking arrangements complete all as specified.
M&L for CI coupling for centrifugal pump set with spider star rubber coupling as per existing size & shape suitable for 30.0 HP capacity pump set including removal of old unsv one complete all as specified and as directed.
S&F gland of size 12mm complete all as directed by Engr-in-charge
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and including GI strip 32 x 6 mm and GI pipe 40 mm dia light grade for protection to the extent of 7.5 mtr as earthing strip by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, concrete pit including excavation and earth work in any type of soil and testing on completion etc complete. Note : GI earth strip and protection pipe 40mm bore dia beyond 7.5 mtr will be measured and paid separately.
Supply of chemical earthig with GI Electrode 3 mtr long with ground enhancing back fill compound all including boring installattion transportation earth work, testing of soil condition, PVC Pit cover and GI Strip upto 7.5 mtr long complete all as specified and directed.
Supplying and laying synthetic Rubber insulated mats minimum 25 mm thick for voltage upto 3.3 KV for electrical purpose suitable for electrical shock safety of sizes 2.00mtr x 1.00mtr complete all as specified and as directed
S & F Replacement lightening conductor from made out of aluminium strip 25 mm x 3 mm complete with fixed on OH tank saddle and fixing screw /insulators for roof or down conductor or fixed to pole or any other indicated situation for loop earthing etc, as required including making test point and testing complete all as specified and as directed.
S & F Replacement air termination rod from On OH tank. Single pointed Air Termination aluminium rod 12mm dia and 300mm long and supported with GI pipe medium grade 40 mm dia not less than 2 mtr for fixing air termination rod over head tank staging with necessary fixing arrangement complete all as directed
S & F Replacement aviation light fitting on OH tank, integral LED aviation obstruction light (Twin), yellow painted die-cast aluminium alloy housing set of two, heat resistant clear thick glass and accessories with LED lamp complete all as directed
M & L for Sub main wiring with 2 runs of single core 2.5 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor drawn through and including non-metallic 20 mm PVC rigid conduit , ISI marked and its accessories on wall / roof including one run of single core 2.5 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor cable as earth continuity conductor complete all as specified. Note:- Two run of 2.5 Sqmm conductor & one run of 2.5 Sqmm earth conductor & One run of conduit will be measured as on RM
M&L for Sign Board/ Display board/ Layout diagram/Flow Diagram etc of acrylic sheet Blue and white colour at various installations including printing/writing of installations/equipments/plants including fixing on wall/ Plants & equipments by using fasteners etc complete all as directed
Supply only in replacement of old tear Shock Treatment Chart of various E/M installatons complete all as directed
Supply only in Replacement of old First Aid box complete at various E/M installations complete all as directed
Periodical checking of Pumping sets complete, testing and adjusting all moving parts, lubricating, checking of alignment, checking of unusual sounds, heating, water leakages, etc complete all as directed
Supply only O-Tolidine Solution in 500 ML Bottle (For Chlorine Test), complete all as directed
Supply only PVC Flexible pipe of dia 40/50mm bore dia as per site requirement for suction sweepig motor at swimming pool
Supply only water hardness measuring equipment in built glass electrode of high sensitivity of 0.2mm thickness digital display, self calibrated, measuring range upto 14.0 ppm resolution 0.01PH, Accuracy 0.01PH all as directed.
M & L for servicing and maint of RO Plant of capacity 3000 LPH as per plant requirement inlcuding quarterly visits also on complaints. for smooth funtioning of the plant. Note: - (a) Quoted rates shall deemed to be include Replacement of Spun Jumbo cartridge Filters in each quarter, Servicing & cleaning of RO Membrane in each half year of Cycle.(b) Replacing the filter media such as sand, gravel and cleaning the gravels. Rejected gravels to be replaced with new gravels as directed by Engineer-in-Charge which will be measured and paid for separately. (c) Inspection/ checking the pressure gauges, control valves including connecting pipes etc. damaged/corroded nuts bolts, arresting leakages by replacing gasket with new parts. Welding as required etc. (d) Testing and commission the plant all as directed by Engineer - in- charge complete. (e) Other items required during AMC shall be measured and paid under separate items as supply only.
Supply only Fresh Nature River Sand Filter media 0.4 mm to 0.8 mm size complete
Supply only TCCA - 90 (TRICHLOROISOCYANURIC ACID) high strength chlorinator for water disinfectant in factory sealed HDPE container (40 to 50 kg each) all as directed. Make : Aditya Birla or equivalent as approved
Supply only alum crystal free from impurity class I suitable for swimming pools
Supply only Copper sulphate in 40/50Kg packaging complete all as specified & directed.
S & Lay in trenches UPVC pipe ASTM D-1785, SCH - 80 for plumbing system complete in all respect of 150 mm bore dia including necessary solvent/Adhesive/ and fitting like Coupler Accs/Tees/Bends/Long Bends/Elbow etc and cold welding by accelerator, catalyst with FRP Mat all as specified and directed.
S & Lay in trenches UPVC pipe ASTM D-1785, SCH - 80 for plumbing system complete in all respect of Dia 200 mm bore dia including necessary solvent/Adhesive and fittings like Coupler Accs/Tees/Bends/Long Bends/Elbow etc and cold welding by accelerator, catalyst with FRP Mat all as specified and directed.
S & Lay in trenches Rigid UPVC AGRI Pipe as per IS :4985-2000 for plumbing drain system complete in all respect of Dia 250 mm bore dia spigot and socketed end all including necessary solvent/Adhesive and cold welding by accelerator, catalyst with FRP Mat all as specified and directed.
Sunhari Electricals
Dheer Engineering
metro electrical services
purva engineears and contracters
K.K.Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .